Table of Contents
Advertisement
15. Replace the label door (see
CAUTION:
result in damage to the computer.
16. Turn on the computer.
NOTE:
After you have replaced the system board, enter the computer Service Tag into the BIOS of the replacement system board.
17. Enter the service tag (see
Entering the Service Tag in the BIOS
1. Ensure that the AC adapter is plugged in and that the main battery is installed properly.
2. Turn on the computer.
3. Press <F2> during POST to enter the system setup program.
4. Navigate to the security tab and enter the service tag in the Set Service Tag field.
Back to Contents Page
More user manuals on
Replacing the Label
Door).
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
Entering the Service Tag in the
ManualsBase.com
BIOS).
Advertisement
Table of Contents
