Page 1 User Manual DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port November 2015...
Page 2: Table Of Contents
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port User Manual Contents Chapter 1. Introduction..........5 Contents and Audience............5 Conventions..............5 Document Structure............5 Chapter 2. Overview..........6 General Information............6 Specifications*.............7 Product Appearance............12 Front Panel..............12 Side Panel...............14 Back Panel...............15 Delivery Package............16 Chapter 3. Installation and Connection......17 Before You Begin............17...
Page 3 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port User Manual Status..............79 Network Statistics............79 DHCP..............80 Routing Table............81 Clients..............82 Active Sessions............83 Multicast groups............84 Net................85 WAN..............85 Creating PPPoE WAN Connection..........86 Creating IPv6 PPPoE or PPPoE Dual Stack WAN Connection....91 Creating Static IP or Dynamic IP WAN Connection......97 Creating Static IPv6 or Dynamic IPv6 WAN Connection....102...
Page 4 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port User Manual USB Storage...............185 Information.............185 Filebrowser.............186 Print Server............187 Samba..............188 FTP..............189 DLNA..............190 Transmission..............192 Transmission Settings...........192 Control..............195 URL Filter..............195 Yandex.DNS..............197 Internet Protection Settings..........197 System..............200 Administrator Password..........201 Configuration............202 System Log..............204 Firmware Upgrade............206 Local Update............207 Remote Update............208...
Page 5: Chapter 1. Introduction
Chapter 2 gives an overview of the router's hardware and software features, describes its appearance and the package contents. Chapter 3 explains how to install the router DIR-320 and configure a PC in order to access its web- based interface.
Page 6: Chapter 2. Overview
Now you can simply update the firmware: the router itself finds approved firmware on D-Link update server and notifies when ready to install it. 1 Not included in the delivery package. D-Link does not guarantee compatibility with all USB modems. For the list of supported USB modems, see the Specifications* section, page 7.
Page 7: Specifications
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Overview User Manual Specifications Hardware Interfaces · 10/100BASE-TX WAN port · 4 10/100BASE-TX LAN ports · USB 2.0 port LEDs · POWER · · INTERNET · WLAN · 4 LAN LEDs ·...
Page 8 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Overview User Manual Software · Firewall functions Network Address Translation (NAT) · Stateful Packet Inspection (SPI) · IP filter · IPv6 filter · MAC filter · URL filter · ·...
Page 9 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Overview User Manual Wireless Module Parameters · Wireless connection rate IEEE 802.11b: 1, 2, 5.5, and 11Mbps · IEEE 802.11g: 6, 9, 12, 18, 24, 36, 48, and 54Mbps ·...
Page 10: Operating Environment
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Overview User Manual Physical Parameters · Dimensions 160 x 120 x 59 mm (6.3 x 4.7 x 2.3 in) · Weight 220 g (0.49 lb) Operating Environment · Power Output: 12V DC, 1A ·...
Page 11 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Overview User Manual Supported USB modems · Huawei E3131 · Huawei E3272 · Huawei E3351 · Huawei E367 · Huawei E392 · Megafon M100-1 · Megafon M100-3 · Megafon M100-4 ·...
Page 12: Product Appearance
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Overview User Manual Product Appearance Front Panel Figure 1. Front panel view. Mode Description The router is powered on. Solid green POWER The router is powered off. No light Attempting to add a wireless device via the WPS Blinking green function.
Page 13 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Overview User Manual Mode Description The router's WLAN is on. Solid green The WLAN interface is active (upstream or downstream WLAN Blinking green traffic). The router's WLAN is off. No light...
Page 14: Side Panel
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Overview User Manual Side Panel Figure 2. Side panel view. Name Description A button to enable/disable the router's wireless network and to quickly add wireless devices to the router's WLAN (the WPS function).
Page 15: Back Panel
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Overview User Manual Back Panel Figure 3. Back panel view. Port Description LAN 1-4 4 Ethernet ports to connect computers or network devices. A port to connect to a cable or DSL modem or to a private Ethernet...
Page 16: Delivery Package
• “Quick Installation Guide” (brochure). • The “User Manual” and “Quick Installation Guide” documents are available on D-Link website (see www.dlink.ru). Using a power supply with a different voltage rating than the one included will cause damage and void the warranty for this product.
Page 17: Chapter 3. Installation And Connection
Operating System Configuration of the multifunction wireless router DIR-320 supporting LTE, 3G GSM and CDMA with a built-in switch (hereinafter referred to as “the router”) is performed via the built-in web- based interface. The web-based interface is available from any operating system that supports a web browser.
Page 18 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Installation and Connection User Manual USB Modem To connect to an LTE, 3G GSM or CDMA network, you should use a USB modem. Connect it to the USB port of the router, then access the web-based interface of the router, and you will be able to...
Page 19: Connecting To Pc
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Installation and Connection User Manual Connecting to PC PC with Ethernet Adapter 1. Make sure that your PC is powered off. 2. Connect an Ethernet cable between any of LAN ports located on the back panel of the router and the Ethernet port of your PC.
Page 20 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Installation and Connection User Manual 3. In the Local Area Connection Properties window, on the General tab, select the Internet Protocol (TCP/IP) line. Click the Properties button. Figure 5. The Local Area Connection Properties window.
Page 21 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Installation and Connection User Manual 4. Select the Obtain an IP address automatically and Obtain DNS server address automatically radio buttons. Click the OK button. Figure 6. The Internet Protocol (TCP/IP) Properties window.
Page 22: Obtaining Ip Address Automatically In Os Windows 7
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Installation and Connection User Manual Obtaining IP Address Automatically in OS Windows 7 1. Click the Start button and proceed to the Control Panel window. 2. Select the Network and Sharing Center section. (If the Control Panel has the category...
Page 23 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Installation and Connection User Manual 3. In the menu located on the left part of the window, select the Change adapter settings line. Figure 8. The Network and Sharing Center window.
Page 24 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Installation and Connection User Manual 4. In the opened window, right-click the relevant Local Area Connection icon and select the Properties line in the menu displayed. Figure 9. The Network Connections window.
Page 25 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Installation and Connection User Manual 5. In the Local Area Connection Properties window, on the Networking tab, select the Internet Protocol Version 4 (TCP/IPv4) line. Click the Properties button. Figure 10. The Local Area Connection Properties window.
Page 26 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Installation and Connection User Manual Figure 11. The Internet Protocol Version 4 (TCP/IPv4) Properties window. 7. Click the OK button in the connection properties window. Now your computer is configured to obtain an IP address automatically.
Page 27: Pc With Wi-Fi Adapter
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Installation and Connection User Manual PC with Wi-Fi Adapter 1. To connect via an LTE, 3G GSM or CDMA network: connect your USB modem to the USB port located on the left side panel of the router.
Page 28: Configuring Wi-Fi Adapter In Os Windows Xp
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Installation and Connection User Manual Configuring Wi-Fi Adapter in OS Windows XP 1. Click the Start button and proceed to the Control Panel > Network and Internet Connections > Network Connections window.
Page 29: Configuring Wi-Fi Adapter In Os Windows 7
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Installation and Connection User Manual Configuring Wi-Fi Adapter in OS Windows 7 1. Click the Start button and proceed to the Control Panel window. 2. Select the Network and Sharing Center section. (If the Control Panel has the category...
Page 30 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Installation and Connection User Manual 6. In the opened Wireless Network Connection window, select the wireless network DIR- 320 and click the Connect button. Figure 15. The list of available networks.
Page 31: Connecting To Web-Based Interface
(create a WAN connection, change the parameters of the wireless network, specify the settings of the firewall, etc.). For security reasons, router DIR-320 with default settings cannot connect to the Internet. To get started, please set your own password used to access the web-based interface and, if needed, configure other settings recommended by your ISP.
Page 32 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Installation and Connection User Manual When the web-based interface is accessed the next time and after, the login page opens. Enter the username (admin) in the Login field and the password you specified in the...
Page 33: Web-Based Interface Structure
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Installation and Connection User Manual Web-based Interface Structure General Information Page After successful registration the Home / Information page opens. Figure 19. The general information page. Page 33 of 220...
Page 34: Menu Sections
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Installation and Connection User Manual The web-based interface of the router is multilingual. If you need to select another language for the web-based interface, place the mouse pointer over the English caption in the top part of the page and select a language from the menu displayed.
Page 35 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Installation and Connection User Manual To configure the router's wireless network, go to the Wireless network settings wizard page (for the detailed description of the Wizard, see the Wireless Network Settings Wizard section, page 70).
Page 36: Notifications And System Drop-Down Menu
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Installation and Connection User Manual Notifications and System Drop-down Menu The router's web-based interface displays the notifications in the top right part of the page. Figure 21. The web-based interface notifications.
Page 37 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Installation and Connection User Manual Control Description Click the icon to save new settings to the non-volatile memory. Also you can save the device's parameters via the Save button on the System / Configuration page.
Page 38 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Installation and Connection User Manual Control Description Click the icon to exit the web-based interface. Logout Page 38 of 220...
Page 39: Chapter 4. Configuring Via Web-Based Interface
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual CHAPTER 4. CONFIGURING WEB-BASED INTERFACE Monitoring The page displays an interactive scheme which illustrates the router's settings and the LAN structure. Figure 23. The Monitoring page.
Page 40 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual The interactive scheme displays the following elements: Control Description The Internet element displays information on the active connection. Place the mouse pointer over the icon to switch to another connection, remove existing connections, or add new ones.
Page 41: Virtual Servers
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Control Description The Virtual Servers element is designed for redirecting incoming traffic to a specific IP address in the LAN. It displays the total number of rules for redirecting traffic and the number of rules active in this specific LAN.
Page 42 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Control Description The Wireless element displays information on Wi-Fi module operation. To the left, the name of the access point is displayed. You can change it in the editing mode.
Page 43: Click'n'connect
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Click'n'Connect To configure connection to the Internet, click the Click'n'Connect link in the Home section. Figure 24. Configuring connection to the Internet. Connect the Ethernet cable provided by your ISP to the WAN port of the router. Verify the relevant LED (the INTERNET LED should be on).
Page 44 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 25. The page for selecting a 3G network operator. On the opened page, from the Provider drop-down list, select your country and operator if you are...
Page 45 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 26. The page for selecting the connection type. On the opened page, select the needed choice of the radio button and click the Next button.
Page 46: Creating Wan Connection
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Creating WAN Connection PPPoE Connection Figure 27. Configuring PPPoE WAN connection. In the Connection name field, specify a name for the connection for easier identification.
Page 47: Ipv6 Pppoe Or Pppoe Dual Stack Connection
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual IPv6 PPPoE or PPPoE Dual Stack Connection Figure 28. Configuring IPv6 PPPoE WAN connection. In the Connection name field, specify a name for the connection for easier identification.
Page 48: Static Ip Connection
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Static IP Connection Figure 29. Configuring Static IP WAN connection. In the Connection name field, specify a name for the connection for easier identification.
Page 49: Dynamic Ip Connection
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Dynamic IP Connection Figure 30. Configuring Dynamic IP WAN connection. In the Connection name field, specify a name for the connection for easier identification.
Page 50: Static Ipv6 Connection
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Static IPv6 Connection Figure 31. Configuring Static IPv6 WAN connection. In the Connection name field, specify a name for the connection for easier identification.
Page 51: Dynamic Ipv6 Connection
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Dynamic IPv6 Connection Figure 32. Configuring Dynamic IPv6 WAN connection. In the Connection name field, specify a name for the connection for easier identification.
Page 52: Pppoe + Static Ip Connection
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual PPPoE + Static IP Connection Figure 33. Configuring PPPoE + Static IP WAN connection. Fill in the IP Address and Netmask fields. In the Gateway IP address field, enter the IP address of the gateway used by this WAN connection.
Page 53 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual If needed, enter the IP addresses of the ISP's local resources. Figure 34. Configuring PPPoE + Static IP WAN connection. Click the Next button to continue.
Page 54 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 35. Configuring PPPoE + Static IP WAN connection. In the Connection name field, specify a name for the connection for easier identification. In the Username field, enter your login, and in the Password and Password confirmation fields –...
Page 55: Pppoe + Dynamic Ip Connection
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual PPPoE + Dynamic IP Connection Figure 36. Configuring PPPoE + Dynamic IP WAN connection. If your ISP has provided the addresses of the DNS servers, deselect the Obtain DNS server addresses automatically checkbox and fill in the Primary DNS server field.
Page 56 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 37. Configuring PPPoE + Dynamic IP WAN connection. In the Connection name field, specify a name for the connection for easier identification. In the Username field, enter your login, and in the Password and Password confirmation fields –...
Page 57: Pptp + Static Ip Or L2Tp + Static Ip Connection
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual PPTP + Static IP or L2TP + Static IP Connection Figure 38. Configuring PPTP + Static IP WAN connection. Fill in the IP Address and Netmask fields.
Page 58 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual If needed, enter the IP addresses of the ISP's local resources. Figure 39. Configuring PPTP + Static IP WAN connection. Click the Next button to continue.
Page 59 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 40. Configuring PPTP + Static IP WAN connection. In the Connection name field, specify a name for the connection for easier identification. In the Username field, enter your login, and in the Password and Password confirmation fields –...
Page 60: Pptp + Dynamic Ip Or L2Tp + Dynamic Ip Connection
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual PPTP + Dynamic IP or L2TP + Dynamic IP Connection Figure 41. Configuring PPTP + Dynamic IP WAN connection. If your ISP has provided the addresses of the DNS servers, deselect the Obtain DNS server addresses automatically checkbox and fill in the Primary DNS server field.
Page 61 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 42. Configuring PPTP + Dynamic IP WAN connection. In the Connection name field, specify a name for the connection for easier identification. In the Username field, enter your login, and in the Password and Password confirmation fields –...
Page 62: 3G Connection
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual 3G Connection Figure 43. Configuring 3G WAN connection. In the Connection name field, specify a name for the connection for easier identification. In the Username field, enter your login, and in the Password and Password confirmation fields –...
Page 63: Lte Connection
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual LTE Connection For the USB modem Megafon M100-1, please reboot the router after finishing the Wizard. Figure 44. Configuring LTE WAN connection. In the Connection name field, specify a name for the connection for easier identification.
Page 64: Checking Internet Availability
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Checking Internet Availability On the page, you can check the WAN connection you have created. Figure 45. Checking the Internet availability. In the Result section, the status of the WAN connection and possible causes of malfunctions are displayed.
Page 65: Configuring Yandex.dns Service
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Configuring Yandex.DNS Service On the page, you can enable the Yandex.DNS service and configure its operating mode. Figure 46. Configuring the Yandex.DNS service. To enable the Yandex.DNS service, select the Enable Yandex.DNS checkbox. Then...
Page 66: Configuring Wireless Connection
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Configuring Wireless Connection Figure 47. Selecting the operating mode for the wireless network. If you are not going to use the wireless connection, select the Turn off choice of the Mode radio button.
Page 67 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual On the opened page, in the SSID field, specify a new name for the network (use digits and Latin characters). Figure 48. Changing the name of the wireless LAN.
Page 68 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual On the next page, you can modify security settings of the WLAN. Select the Protected value from the Network Authentication drop-down list and enter a key (a password that will be used to access your wireless network) in the Network key field.
Page 69: Configuring Iptv
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Configuring IPTV On the page, you can configure the router to use an IPTV set-top box. Figure 50. Selecting a LAN port to connect an IPTV set-top box.
Page 70: Wireless Network Settings Wizard
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Wireless Network Settings Wizard To specify all needed settings for your wireless network, click the Wireless network settings wizard link in the Home section.
Page 71: Access Point Mode
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Access Point Mode On the opened page, in the SSID field, specify a new name for the network (use digits and Latin characters). Figure 52. Page for changing the name of the wireless LAN.
Page 72 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual On the next page, you can modify security settings of the WLAN. Select the Protected value from the Network Authentication drop-down list and enter a key (a password that will be used to access your wireless network) in the Network key field.
Page 73: Client Mode
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Client Mode On the opened page, click the Search button. Figure 54. The page for selecting a network to connect. Select the network to which you want to connect and click the Next button.
Page 74 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 55. The page for entering the password for connection to the wireless network. If you need a password to connect to the selected network, enter the password in the Network key field and click the Next button.
Page 75 Then, if needed, specify another name for the network in the SSID field (use digits and Latin characters). It is strongly recommended to configure the secure wireless network of DIR-320. To do this, select the Protected value from the Network Authentication drop-down list and enter a key (a password that will be used to access your wireless network) in the Network key field.
Page 76: Virtual Server Settings Wizard
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Virtual Server Settings Wizard To create a virtual server for redirecting incoming Internet traffic to a specified IP address in the LAN, click the Virtual server settings wizard link in the Home section.
Page 77 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Parameter Description A port of the IP address specified in the Private IP field to which traffic is directed from the Public port. Specify the start and the Private port (begin)/ end value for the port range.
Page 78: Iptv Settings Wizard
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual IPTV Settings Wizard To configure the router to use an IPTV set-top box, click the IPTV settings wizard link in the Home section. Figure 58. The page for selecting a LAN port to connect an IPTV set-top box.
Page 79: Status
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Status The pages of this section display data on the current state of the router: network statistics • IP addresses leased by the DHCP server •...
Page 80: Dhcp
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual DHCP The Status / DHCP page displays the information on computers that have been identified by hostnames and MAC addresses and have got IP addresses from the DHCP server of the device, as well as the IP address expiration periods (the lease time).
Page 81: Routing Table
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Routing Table The Status / Routing table page displays the information on routes. The table contains destination IP addresses, gateways, subnet masks, and other data.
Page 82: Clients
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Clients On the Status / Clients page, you can view the list of devices connected to the router and devices accessing its web-based interface.
Page 83: Active Sessions
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Active Sessions On the Status / Active sessions page, you can view information on current sessions in the router's network. For each session the following data are displayed: a protocol for network packet transmission, a source IP address and port, a destination IP address and port.
Page 84: Multicast Groups
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Multicast groups The Status / Multicast groups page displays addresses of active multicast groups (including IPTV channels and groups for transferring service information) to which the device is subscribed, and the interface through which the device is subscribed.
Page 85: Net
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual In this menu you can configure basic parameters of the router's local area network and configure connection to the Internet (a WAN connection). On the Net / WAN page, you can create and edit connections used by the router.
Page 86: Creating Pppoe Wan Connection
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Creating PPPoE WAN Connection click the Add button on the Net / WAN page. To create a connection of the PPPoE type, On the opened page, select the PPPoE value from the Connection Type drop-down list and specify the needed values.
Page 87 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 67. The page for creating a new PPPoE connection. The Ethernet section. Parameter Description Ethernet The maximum size of units transmitted by the interface.
Page 88 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 68. The page for creating a new PPPoE connection. The PPP section. Parameter Description Username A username (login) to access the Internet. Select the checkbox if you don't need to enter a username and Without authorization password to access the Internet.
Page 89: Static Ip Address
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Parameter Description This option is used by some ISPs. Contact your ISP to clarify if this PPP IP extension checkbox needs to be enabled.
Page 90 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 69. The page for creating a new PPPoE connection. The Miscellaneous section. Parameter Description Miscellaneous When the checkbox is selected, the router uses an alternate routing Isolate connection table for this connection.
Page 91: Creating Ipv6 Pppoe Or Pppoe Dual Stack Wan Connection
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Creating IPv6 PPPoE or PPPoE Dual Stack WAN Connection To create a connection of the IPv6 PPPoE or PPPoE Dual Stack type, click the Add button on the Net / WAN page.
Page 92 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 71. The page for creating a new IPv6 PPPoE connection. The Ethernet section. Parameter Description Ethernet The maximum size of units transmitted by the interface.
Page 93 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 72. The page for creating a new IPv6 PPPoE connection. The PPP section. Parameter Description Username A username (login) to access the Internet.
Page 94 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Parameter Description For the PPPoE Dual Stack type only. Static IP Address Fill in the field if you want to use a static IP address to access the Internet.
Page 95 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 75. The page for creating a new Pv6 PPPoE connection. The IPv6 DNS addresses section. Parameter Description IPv6 DNS addresses Select the checkbox to configure automatic assignment of IPv6 Obtain DNS server DNS server addresses.
Page 96 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 76. The page for creating a new Pv6 PPPoE connection. The Miscellaneous section. Parameter Description Miscellaneous When the checkbox is selected, the router uses an alternate routing Isolate connection table for this connection.
Page 97: Creating Static Ip Or Dynamic Ip Wan Connection
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Creating Static IP or Dynamic IP WAN Connection To create a connection of the Static IP or Dynamic IP type, click the Add button on the Net / WAN page.
Page 98 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 78. The page for creating a new Static IP connection. The Ethernet section. Parameter Description Ethernet The maximum size of units transmitted by the interface.
Page 99 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 79. The page for creating a new Static IP connection. The IP section. Parameter Description For Static IP type IP Address Enter an IP address for this WAN connection.
Page 100 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 80. The page for creating a new Static IP connection. The Authorization via 802.1x protocol section. Parameter Description Authorization via 802.1x protocol Authorization in the Select the checkbox to allow authorization in the ISP's network via ISP’s network via...
Page 101 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 81. The page for creating a new Static IP connection. The Miscellaneous section. Parameter Description Miscellaneous When the checkbox is selected, the router uses an alternate routing Isolate connection table for this connection.
Page 102: Creating Static Ipv6 Or Dynamic Ipv6 Wan Connection
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Creating Static IPv6 or Dynamic IPv6 WAN Connection To create a connection of the Static IPv6 or Dynamic IPv6 type, click the Add button on the Net / WAN page.
Page 103 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 83. The page for creating a new Static IPv6 connection. The Ethernet section. Parameter Description Ethernet The maximum size of units transmitted by the interface.
Page 104 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 84. The page for creating a new Static IPv6 connection. The IP section. Parameter Description For Static IPv6 type IPv6 address Enter an IPv6 address for this WAN connection.
Page 105 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 85. The page for creating a new Static IPv6 connection. The Miscellaneous section. Parameter Description Miscellaneous When the checkbox is selected, the router uses an alternate routing Isolate connection table for this connection.
Page 106: Creating Pppoe + Static Ip Or Pppoe + Dynamic Ip Wan Connection
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Creating PPPoE + Static IP or PPPoE + Dynamic IP WAN Connection To create a connection of the PPPoE + Static IP or PPPoE + Dynamic IP type, click the Add button on the Net / WAN page.
Page 107 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 87. The page for creating a new PPPoE + Static IP connection. The Ethernet section. Parameter Description Ethernet The maximum size of units transmitted by the interface.
Page 108 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 88. The page for creating a new PPPoE + Static IP connection. The IP section. Parameter Description For PPPoE + Static IP type IP Address Enter an IP address for this WAN connection.
Page 109 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 89. The page for creating a new PPPoE + Static IP connection. The Authorization via 802.1x protocol section. Parameter Description Authorization via 802.1x protocol...
Page 110 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 90. The page for creating a new PPPoE + Static IP connection. The Miscellaneous section. Parameter Description Miscellaneous (for IP section) When the checkbox is selected, the router uses an alternate routing Isolate connection table for this connection.
Page 111 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 91. The page for creating a new PPPoE + Static IP connection. The PPP section. Parameter Description Username A username (login) to access the Internet.
Page 112 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Parameter Description This option is used by some ISPs. Contact your ISP to clarify if this PPP IP extension checkbox needs to be enabled.
Page 113: Creating Pptp/L2Tp + Static Ip Or Pptp/L2Tp + Dynamic Ip Wan Connection
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Creating PPTP/L2TP + Static IP or PPTP/L2TP + Dynamic IP WAN Connection To create a connection of the PPTP + Static IP, L2TP + Static IP, PPTP + Dynamic IP, or L2TP + Dynamic IP type, click the Add button on the Net / WAN page.
Page 114 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 94. The page for creating a new PPTP + Static IP connection. The Ethernet section. Parameter Description Ethernet The maximum size of units transmitted by the interface.
Page 115 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 95. The page for creating a new PPTP + Static IP connection. The IP section. Parameter Description For PPTP + Static IP and L2TP + Static IP types IP Address Enter an IP address for this WAN connection.
Page 116 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 96. The page for creating a new PPTP + Static IP connection. The Authorization via 802.1x protocol section. Parameter Description Authorization via 802.1x protocol...
Page 117 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 97. The page for creating a new PPTP + Static IP connection. The VPN section. Parameter Description Select the checkbox to enable auto-start of the connection upon the Connect automatically boot-up of the router.
Page 118 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Parameter Description Select a method of MPPE encryption. No encrypt: MPPE encryption is not applied. • MPPE 40/128 bit: MPPE encryption with a 40-bit or 128-bit •...
Page 119 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Parameter Description Select the checkbox to enable protection against ARP and DDoS Firewall attacks. Select the checkbox to allow the router to answer ping requests from Ping the external network through this connection.
Page 120: Creating 3G Wan Connection
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Creating 3G WAN Connection If the PIN code check is enabled for the SIM card inserted into your USB modem, then prior to creating a 3G WAN connection, proceed to the 3G/LTE modem / PIN menu and enter the PIN code on the page displayed (see the 3G/LTE Modem section, page 181).
Page 121 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 99. The page for creating a new 3G connection. The USB modem section. Parameter Description USB modem The value of the field specifies the type of the network to which the router connects.
Page 122 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Parameter Description Authentication Select a required authentication method from the drop-down list or algorithm leave the AUTO value. The maximum size of units transmitted by the interface. Optional.
Page 123: Creating Lte Wan Connection
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Creating LTE WAN Connection For the USB modem Megafon M100-1, please reboot the router after creating the WAN connection. To create a connection of the LTE type, click the Add button on the Net / WAN page. On the opened page, select the relevant value from the Connection Type drop-down list and specify the needed values.
Page 124 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 103. The page for creating a new LTE connection. The USB modem section. Parameter Description USB modem The value of the field specifies the type of the network to which the router connects.
Page 125 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 105. The page for creating a new LTE connection. The Miscellaneous section. Parameter Description Miscellaneous Select the checkbox if you want one WAN IP address to be used for all computers of your LAN.
Page 126: Lan
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual To configure the router's local interface, proceed to the Net / LAN page. Figure 106. Basic settings of the local interface. If needed, edit the basic settings of the local interface.
Page 127 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Parameter Description Select the checkbox so that the devices connected to the router obtain the address of the router as the DNS server address.
Page 128 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Parameter Description Select an operating mode of the DHCPv6 server from the drop-down list. Stateless: clients themselves configure IPv6 addresses using the State mode prefix.
Page 129: Wan Reservation
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual WAN Reservation On the Net / WAN reservation page, you can enable the WAN backup function, which provides you with uninterrupted access to the Internet. When your main connection breaks down, the router activates the backup connection;...
Page 130 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Parameter Description A number of requests that will be sent in order to analyze the status Number of inspections of the main connection when the connection is active (the router of active connection uses the main connection as a default gateway).
Page 131: Wi-Fi
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Wi-Fi In this menu you can specify all needed settings for your wireless network. Basic Settings On the Wi-Fi / Basic settings page, you can enable your wireless local area network (WLAN) and configure its basic parameters.
Page 132 (It is recommended not to select this checkbox in order to simplify initial configuration of your WLAN.) A name for the WLAN. By default, the value DIR-320 is specified. SSID It is recommended to specify another name for the network upon initial configuration (use digits and Latin characters).
Page 133: Security Settings
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Security Settings On the Wi-Fi / Security settings page, you can modify security settings of the WLAN. Figure 112. The default security settings. By default, the WPA2-PSK network authentication type is specified for the WLAN. WPS PIN from the barcode label is used as the network key.
Page 134 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 113. Network authentication types supported by the router. The router supports the following authentication types: Authentication type Description Open authentication (with WEP encryption for wireless network Open modes not supporting 802.11n devices).
Page 135 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual The WPA , WPA2 , and WPA/WPA2 mixed authentication types require a RADIUS server. When the Open or Shared value is selected, the WEP Encryption settings section is displayed (the section is unavailable for the wireless network operating modes which support the standard 802.11n):...
Page 136 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Parameter Description The checkbox activating WEP encryption. When the checkbox is selected, the Default Key ID field, the Encryption Key WEP as Enable Encryption WEP HEX checkbox, the WEP key length drop-down list, and four Encryption Key WEP fields are displayed on the page.
Page 137 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual When the WPA-PSK, WPA2-PSK, or WPA-PSK/WPA2-PSK mixed value is selected, the WPA Encryption settings section is displayed: Figure 115. The WPA-PSK/WPA2-PSK mixed value is selected from the Network Authentication drop- down list.
Page 138 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual When the WPA, WPA2, or WPA/WPA2 mixed value is selected, the RADIUS settings and WPA Encryption settings sections are available: Figure 116. The WPA/WPA2 mixed value is selected from the Network Authentication drop-down list.
Page 139: Mac Filter
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual MAC Filter On pages of the Wi-Fi / MAC Filter section, you can define a set of MAC addresses of devices which will be allowed to access the WLAN, or define MAC addresses of devices which will not be allowed to access the WLAN.
Page 140 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 118. The page for adding a MAC address. Click the Add button and enter an address in the field displayed. Also you can enter the MAC address of a device connected to the router's LAN at the moment.
Page 141: List Of Wi-Fi Clients
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual List of Wi-Fi Clients On the Wi-Fi / List of Wi-Fi clients page, you can view the list of wireless clients connected to the router.
Page 142: Wps
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual On the Wi-Fi / WPS page, you can enable the function for secure configuration of the WLAN and select a method used to easily add wireless devices to the WLAN.
Page 143 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual To activate the WPS function, select the WPS Enable checkbox and click the Apply button. When the checkbox is selected, the Information and Connection sections are available on the page.
Page 144: Using Wps Function Via Web-Based Interface
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Using WPS Function via Web-based Interface To add a wireless device via the PIN method of the WPS function, follow the next steps: 1. Select the WPS Enable checkbox.
Page 145 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Later you will be able to add wireless devices to the WLAN by pressing the WPS button of the router. 1. Select the PBC method in the software of the wireless device that you want to connect to the router's WLAN.
Page 146: Additional Settings
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Additional Settings On the Wi-Fi / Additional settings page, you can define additional parameters for the WLAN of the router. Changing parameters presented on this page may negatively affect your WLAN! Figure 121.
Page 147 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Parameter Description TX Power The transmit power (in percentage terms) of the router. Select the checkbox to disable multicasting for the router's WLAN. Deselect the checkbox to enable multicasting from WAN...
Page 148: Wmm
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual On the Wi-Fi / WMM page, you can enable the Wi-Fi Multimedia function. The WMM function implements the QoS features for Wi-Fi networks. It helps to improve the quality of data transfer over Wi-Fi networks by prioritizing different types of traffic.
Page 149 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual For every Access Category the following fields are available: Parameter Description Arbitrary Inter-Frame Space Number. This parameter influences Aifsn time delays for the relevant Access Category. The lower the value, the higher is the Access Category priority.
Page 150: Client
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Client On the Wi-Fi / Client page, you can configure the router as a client to connect to a wireless access point. As a rule, the client mode is used to connect to a WISP network. All parameters specified on this page should be provided by your WISP.
Page 151 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual To configure the router as a client, select the Enable client checkbox. When the checkbox is selected, the following fields are displayed on the page:...
Page 152 For the WPA-PSK, WPA2-PSK, or WPA-PSK/WPA2-PSK mixed authentication types, fill in the Encryption Key PSK field and click the Apply button. After clicking the Apply button, the wireless channel of DIR-320 will switch to the channel of the wireless access point to which you have connected.
Page 153: Advanced
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Advanced In this menu you can configure advanced settings of the router: create groups of ports for VLANs • enable the UPnP IGD protocol •...
Page 154: Vlan
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual VLAN On the Advanced / VLAN page, you can create and edit groups of ports for virtual networks (VLANs). By default, 2 groups are created in the router's system: lan: it includes ports 1-4.
Page 155 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 125. The page for adding a group of ports for VLAN. You can specify the following parameters: Parameter Description Name A name for the port for easier identification.
Page 156 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Parameter Description Tagged port From the list, select an available value to assign it to this group. The section includes the ports (a physical port of the router, the wireless interface) that can be added to the group.
Page 157: Upnp Igd
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual UPnP IGD On the Advanced / UPnP IGD page, you can enable the UPnP IGD protocol. The router uses the UPnP IGD protocol for automatic configuration of its parameters for network applications requiring an incoming connection to the router.
Page 158: Redirect
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Redirect On the Advanced / Redirect page, you can enable notifications on the reason of the Internet connection failure. Notifications will be displayed in the browser window when a user is attempting to open a web site on the Internet.
Page 159: Ddns
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual DDNS On the Advanced / DDNS page, you can define parameters of the DDNS service, which allows associating a domain name with dynamic IP addresses.
Page 160 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual To edit parameters of the existing DDNS service, select a needed field in the relevant line of the table, change its value, and click the Apply button.
Page 161: Routing
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Routing On the Advanced / Routing page, you can add static routes (routes for networks that are not connected directly to the device but are available through the interfaces of the device) into the system.
Page 162 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual To edit an existing route, select a needed field in the relevant line of the table, change its value, and click the Apply button.
Page 163: Ipv6 Routing
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual IPv6 Routing On the Advanced / IPv6 routing page, you can add static routes (routes for networks that are not connected directly to the device but are available through the interfaces of the device) into the system.
Page 164 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual To edit an existing route, select a needed field in the relevant line of the table, change its value, and click the Apply button.
Page 165: Remote Access To Device
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Remote Access to Device On the Advanced / Remote access to device page, you can configure access to the web-based interface of the router. By default, the access from external networks to the router is closed. If you need to allow access to the router from the external network, create relevant rules.
Page 166 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Parameter Description Select the checkbox to allow access to the router for any host. When Open access from any the checkbox is selected, the IP version drop-down list is...
Page 167: Miscellaneous
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Miscellaneous On the Advanced / Miscellaneous page, you can enable IGMP, RTSP, the SIP ALG and the PPPoE pass through functions for the router.
Page 168 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual To enable RTSP, select the RTSP checkbox and click the Apply button. Such a setting allows managing media stream: fast forward streaming audio/video, pause and start it.
Page 169: Tr-069 Client
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual TR-069 Client On the Advanced / TR-069 Client page, you can configure the router for communication with a remote Auto Configuration Server (ACS). The TR-069 client is used for remote monitoring and management of the device.
Page 170 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Parameter Description Enable TR-069 Client Select the checkbox to enable the TR-069 client. Inform settings Select the checkbox so the router may send reports (data on the Enable device and network statistics) to the ACS.
Page 171: Flow Control
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Flow Control On the Advanced / Flow Control page, you can enable and disable data flow control for the WAN port of the router.
Page 172: Firewall
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Firewall In this menu you can configure the firewall of the router: add rules for IP filtering • create virtual servers • define a DMZ •...
Page 173 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 137. The page for adding a rule for IP filtering. You can specify the following parameters: Parameter Description General A protocol for network packet transmission. Select a value from the Protocol drop-down list.
Page 174: Destination Port
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Parameter Description The source host/subnet IP address. To choose a device connected to the router's LAN at the moment, select the relevant IP address from the drop-down list (the field will be filled in automatically).
Page 175: Virtual Servers
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Virtual Servers On the Firewall / Virtual servers page, you can create virtual servers for redirecting incoming Internet traffic to a specified IP address in the local area network.
Page 176 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual You can specify the following parameters: Parameter Description Select a virtual server template from the drop-down list, or select Template Custom to specify all parameters of the new virtual server manually.
Page 177 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual In the Remote access configuration section, rules created on the Advanced / Remote access to device page are displayed. If after creating virtual servers you need to edit rules for remote access, you can quickly get to the Advanced / Remote access to device page by clicking the link to the relevant rule.
Page 178: Dmz
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual A DMZ is a host or network segment located “between” internal (local) and external (global) networks. In the router, the DMZ implements the capability to transfer a request coming to a port of the DSL router from the external network to a specified host of the internal network.
Page 179: Mac Filter
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual MAC Filter On the Firewall / MAC filter page, you can configure MAC-address-based filtering for computers of the router's LAN. Figure 141. The Firewall / MAC filter page.
Page 180: Mac Address
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 142. The page for adding a rule for the MAC filter. You can specify the following parameters: Parameter Description The MAC address of a device from the router's LAN. You can enter...
Page 181: 3G/Lte Modem
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual 3G/LTE Modem This menu is designed to operate USB modems. If the PIN code check for the SIM card inserted into your USB modem is not disabled, proceed to the 3G/LTE modem / PIN section.
Page 182: Information
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Information On the 3G/LTE modem / Information page, you can view data on the USB modem connected to the router. Figure 144. The 3G/LTE modem / Information page.
Page 183: Pin
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual On pages of the 3G/LTE modem / PIN section, you can change the PIN code of the identification card inserted into your USB modem, disable or enable the check of the PIN code.
Page 184 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 146. The 3G/LTE modem / PIN / Changing PIN code page. Enter the current code in the PIN code field, then enter a new code in the New PIN code and New PIN code confirmation fields and click the Apply button.
Page 185: Usb Storage
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual USB Storage This menu is designed to operate USB storages. Here you can do the following: view data on the connected USB storage •...
Page 186: Filebrowser
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Filebrowser On the USB storage / Filebrowser page, you can view the content of your USB storage connected to the router and remove separate folders and files from the USB storage.
Page 187: Print Server
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Print Server On the USB storage / Print-server page, you can configure the router as a print server. Being configured in this way, the router will allow your LAN users to share the printer connected to the USB port of the router.
Page 188: Samba
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Samba On the USB storage / Samba page, you can enable the built-in Samba server of the router to provide access to the USB storage for users of your LAN.
Page 189: Ftp
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual On the USB storage / FTP page, you can enable the built-in FTP server of the router to provide access to the USB storage for users of your LAN.
Page 190: Dlna
60 seconds. In the DLNA server name field, specify a new name of the DLNA server for easier identification in your LAN or leave the value specified by default (D-Link DLNA Server). Use digits and/or Latin characters.
Page 191 Apply button. The step-by-step description of how to configure the DLNA server of the router is available on D-Link website. To access it, click the Setting up DLNA server on the router link in the top part of the page.
Page 192: Transmission
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Transmission In this menu you can configure the built-in Transmission torrent client and manage distributing and downloading processes. Transmission Settings On the Transmission / Transmission settings page, you can configure all needed settings for the built-in Transmission client.
Page 193 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Parameter Description The port on which the web-based interface of the Transmission Web-interface port client is available. The maximum number of files which clients can download Open files limit simultaneously.
Page 194 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual (Open Torrent) and select a file stored on your To add a new torrent file, click the button PC. Click the button Upload in the dialog box appeared.
Page 195: Control
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Control This menu is designed to create restrictions on access to certain web sites. URL Filter On the pages of the Control / URL filter section, you can specify restrictions on access to certain web sites.
Page 196 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 156. The Control / URL filter / URL addresses page. Click the Add button and enter an address in the field displayed. Then click the Apply button.
Page 197: Yandex.dns
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Yandex.DNS This menu is designed to configure the Yandex.DNS service. Yandex.DNS is a web content filtering service which provides the DNS server, protect a computer against malicious web sites, and block access to adult web sites.
Page 198 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Also the selected filtering mode will be applied to all devices newly connected to the router's network. If you need to specify a filtering mode for each device separately, create relevant rules. To do this, go to the Yandex.DNS / Internet protection settings / Devices page.
Page 199 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual To create a new filtering rule for a device, click the Add button in the Rules section. In the line displayed, you can specify the following parameters:...
Page 200: System
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual System In this menu you can do the following: change the password used to access the router's settings • save the current settings to the non-volatile memory •...
Page 201: Administrator Password
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Administrator Password On the System / Administrator password page, you can change the password for the administrator account used to access the web-based interface of the router and to access the device settings via TELNET.
Page 202: Configuration
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Configuration On the System / Configuration page, you can reboot the device, save the changed settings to the non-volatile memory, restore the factory defaults, backup the current configuration, or restore the router's configuration from a previously created file.
Page 203 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual The following buttons are available on the page: Control Description Click the button to save settings to the non-volatile memory. Please, save settings every time you change the router's parameters.
Page 204: System Log
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual System Log On the System / System log / Configuration page, you can set the system log options and configure sending the system log to a remote host.
Page 205 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Control Description A port of the host specified in the Server field. By default, the value Port 514 is specified. After specifying the needed parameters, click the Apply button.
Page 206: Firmware Upgrade
Figure 163. The System / Firmware upgrade page. The current version of the router's firmware is displayed next the D-Link logo in the top left corner of the page. By default, the automatic check for the router's firmware updates is enabled. If a firmware update is available, a notification will be displayed in the top right corner of the page.
Page 207: Local Update
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Local Update Attention! Do not turn off the router before the firmware upgrade is completed. This may cause the device breakdown. To update the firmware of the router locally, follow the next steps: 1.
Page 208: Remote Update
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Remote Update Attention! Do not turn off the router before the firmware upgrade is completed. This may cause the device breakdown. To update the firmware of the router remotely, follow the next steps: 1.
Page 209: System Time
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual System Time On the System / System time page, you can manually set the time and date of the router or configure automatic synchronization of the system time with a time server on the Internet.
Page 210: Ping
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Ping On the System / Ping page, you can check availability of a host from the local or global network via the Ping utility.
Page 211: Traceroute
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Traceroute On the System / Traceroute page, you can determine the route of data transfer to a host via the traceroute utility. Figure 166. The System / Traceroute page.
Page 212: Telnet
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Telnet On the System / Telnet page, you can enable or disable access to the device settings via TELNET from your LAN. By default, access is enabled.
Page 213: Usb Users
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual USB Users On the System / USB users page, you can create user accounts to provide access to data on the USB storage connected to the router.
Page 214 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual On the opened page, in the Login field, specify a username, and in the Password and Password confirmation fields – the password for the account. You can use letters of the Latin alphabet (uppercase and/or lowercase) and digits.
Page 215: Chapter 5. Operation Guidelines
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Operation Guidelines User Manual CHAPTER 5. OPERATION GUIDELINES Safety Instructions Place your router on a flat horizontal surface or mount the router on the wall (the mounting holes are located on the back panel of the device). Make sure that the router is provided with sufficient ventilation.
Page 216: Wireless Installation Considerations
RF noise in your home or office. To maximize your wireless range, follow the guidelines below. 1. Keep the number of walls and ceilings between the DIR-320 device and other network devices to a minimum – each wall or ceiling can reduce your wireless network range by 3- 90 feet (1-30 meters).
Page 217: Connecting To Cable Or Dsl Modem
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Operation Guidelines User Manual Connecting to Cable or DSL Modem If you need to connect the router to a cable or DSL modem, do the following. 1. Place the router in an open location in the supposed center of your wireless network. Do not plug the power adapter into the router.
Page 218: Chapter 6. Abbreviations And Acronyms
DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Abbreviations and Acronyms User Manual CHAPTER 6. ABBREVIATIONS AND ACRONYMS Third Generation Access Category Advanced Encryption Standard Address Resolution Protocol BSSID Basic Service Set Identifier CDMA Code Division Multiple Access...
Page 219 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Abbreviations and Acronyms User Manual Maximum Transmission Unit Network Address Translation Network Time Protocol OFDM Orthogonal Frequency Division Multiplexing Push Button Configuration Personal Identification Number PPPoE Point-to-point protocol over Ethernet...
Page 220 DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support and USB Port Abbreviations and Acronyms User Manual Wired Equivalent Privacy Wi-Fi Wireless Fidelity WISP Wireless Internet Service Provider WLAN Wireless Local Area Network Wi-Fi Multimedia Wi-Fi Protected Access Wi-Fi Protected Setup Page 220 of 220...

D-Link DIR-320 User Manual

Chapter 1. Introduction

Chapter 2. Overview

Chapter 3. Installation and Connection

Chapter 4. Configuring Via Web-Based Interface

Chapter 5. Operation Guidelines

Chapter 6. Abbreviations and Acronyms

Quick Links

Related Manuals for D-Link DIR-320

Summary of Contents for D-Link DIR-320

Table of Contents