Inheriting A Port Profile - Cisco Nexus 5000 Series Configuration Manual
Nx-os layer 2 switching configuration guide, release 5.0(3)n1(1)
Hide thumbs
Also See for Nexus 5000 Series:
- Cli configuration manual (660 pages) ,
- Configuration manual (334 pages) ,
- Command reference manual (196 pages)
Table of Contents
Advertisement
Configuring Ethernet Interfaces
Command or Action
Step 5
show port-profile
Example:
switch(config)# show port-profile name
Step 6
copy running-config startup-config
Example:
switch(config)# copy running-config startup-config
This example shows how to enter port profile configuration mode and enable the port profile:
switch# configure terminal
switch(config)# port-profile type ethernet test
switch(config-port-prof)# state enabled
switch(config-port-prof)#
Inheriting a Port Profile
You can inherit a port profile onto an existing port profile. The switch supports four levels of inheritance.
SUMMARY STEPS
1. configure terminal
2. port-profile name
3. inherit port-profile name
4. exit
5. (Optional) show port-profile
6. (Optional) copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1
configure terminal
Example:
switch# configure terminal
switch(config)#
Step 2
port-profile name
Example:
switch(config)# port-profile test
switch(config-port-prof)#
Cisco Nexus 5000 Series NX-OS Layer 2 Switching Configuration Guide, Release 5.0(3)N1(1)
Configuring Port Profiles
Purpose
(Optional)
Displays the port profile configuration.
(Optional)
Copies the running configuration to the startup
configuration.
Purpose
Enters configuration mode.
Enters port profile configuration mode for the specified
port profile.
31
Advertisement
Table of Contents
