Configuring The Global Source Interface For Radius Server Groups - Cisco Nexus 5000 Series Configuration Manual
Nx-os security configuration guide
Hide thumbs
Also See for Nexus 5000 Series:
- Cli configuration manual (660 pages) ,
- Configuration manual (334 pages) ,
- Command reference manual (196 pages)
Table of Contents
Advertisement
Configuring RADIUS
Command or Action
Step 8
switch(config)# copy running-config
startup-config
The following example shows how to configure a RADIUS server group:
switch# configure terminal
switch(config)# aaa group server radius RadServer
switch(config-radius)# server 10.10.1.1
switch(config-radius)# deadtime 30
switch(config-radius)# use-vrf management
switch(config-radius)# exit
switch(config)# show radius-server group
switch(config)# copy running-config startup-config
Table 6: Related Commands
Command
ip radius source-interface
show radius-server groups
Configuring the Global Source Interface for RADIUS Server Groups
You can configure a global source interface for RADIUS server groups to use when accessing RADIUS
servers. You can also configure a different source interface for a specific RADIUS server group. Refer to the
Related Commands for additional information.
SUMMARY STEPS
1. configure terminal
2. ip radius source-interface interface
3. exit
4. (Optional) show radius-server
5. (Optional) copy running-config startup config
DETAILED STEPS
Command or Action
Step 1
configure terminal
Example:
switch# configure terminal
switch(config)
OL-20919-01
Configuring the Global Source Interface for RADIUS Server Groups
Purpose
(Optional)
Copies the running configuration to the startup configuration.
Description
Configures the global source interface for the
RADIUS groups configured on the Cisco NX-OS
device.
Displays the RADIUS server group configuration.
Purpose
Enters global configuration mode.
Cisco Nexus 5000 Series NX-OS Security Configuration Guide
31
Advertisement
Table of Contents
