Related Manuals for Motorola MBP31
Summary of Contents for Motorola MBP31
- Page 1 USER’S GUIDE MBP31, MBP31 Twin, MBP31 Triple, MBP31 Quad BABY MONITOR USER’S GUIDE The features described in this user’s guide are subject to modifications without prior notice.
- Page 2 Motorola Baby Monitor! Thank you for purchasing the MBP31, MBP31 Twin, MBP31 Triple, MBP31 Quad. Now you can see and hear your baby sleeping in the other room or you can monitor your older children in their playroom.
- Page 3 Overview of your Parent unit Display Up/Talk key Menu key ( Power/Channel*/Enter key Left / Vol - key Power adapter connector Microphone Belt clip Down / Video On-Off key Speaker Right / Vol + key Battery cover screw Sound level LED indicator Battery cover *This function is only available for multi-pack version with more than one camera.
- Page 4 Overview of your Camera unit Power LED On/Off switch Infrared LEDs Speaker Light sensor Microphone Camera lens Important guidelines for installing your Baby Monitor • To use your video monitor camera and parent unit together, you must be able to establish a radio link between them, and the range will be affected by environmental conditions.
-
Page 5: Table Of Contents
Adjusting the volume of the parent unit ........15 Video On/Off Function..............15 Camera Scan Mode ..............15 Play lullaby ................15 MBP31, MBP31 Twin, MBP31 Triple, MBP31 Quad Parent Unit Menu Options ........ 16 Brightness ................16 Night Vision ................16 Disposal of the device (environment)........17 Cleaning..................17 Help .................... -
Page 6: Safety Instructions
1. Safety Instructions WARNING: STRANGULATION HAZARD - Keep the adapter cord out of baby's reach. NEVER place camera or cords within the cot / crib. Secure the cord some distance away from baby's reach. Never use extension cords with AC Adapters. Only use the AC Adapters provided. - Page 7 • Do not place the camera unit or cables in the cot / crib or within reach of the baby (the unit should be at least 3 feet away). • Keep the cords out of reach of children. • Do not cover the baby monitor with a towel or blanket. •...
-
Page 8: Getting Started
2. Getting started Camera unit power supply Connect the small plug of the power adapter to the Camera unit and the other end to the mains socket (110V/60Hz). NOTE Only use the enclosed power adapter. Switch the unit to and a green light will display. Slide the switch to to turn the Camera unit off. -
Page 9: Parent Unit Battery Installation
Parent unit battery installation screw Black Turn the belt clip so that it is in the hanging position. Loosen the screw in a counterclockwise direction using a small screwdriver. Remove the battery cover. Insert the wire tab of the rechargeable battery pack into the contact slot as shown above and fit the battery pack into the compartment. -
Page 10: Parent Unit Power Supply
Parent unit power supply IMPORTANT Installing the rechargeable battery pack and charging it fully before use is recommended. This will allow the unit to operate on battery in the event of a power failure. Connect the small plug of the power adapter to the parent unit and the other end to the mains socket (110V/60Hz) NOTE Only use the enclosed power adapter. -
Page 11: Registration
Registration The baby monitors are already pre-registered upon your purchase. You do not need to register one again unless a Camera unit loses its link with the parent unit, or you want to register an additional Camera unit. Up to 4 Camera units can be registered to one parent unit. If you have more than one Camera unit, please check that you have selected the correct channel at the Parent unit for that Camera unit before you attempt to register it again. -
Page 12: De-Registration
De-registration To remove the registration record of particular camera unit from the parent unit, follow the procedure below with the cameras are powered on and within operating range: One the Parent unit, press to enter menu mode. Press until is selected on the LCD screen. Press to select the camera to de-register. -
Page 13: Using The Camera Unit
3. Using the Camera Unit Setting up • Place the Camera unit in a convenient location (e.g. on a table) and point the camera lens towards the area you want to monitor. • Adjust the Camera unit until you are satisfied with the image in the parent unit. -
Page 14: Selecting A Camera Channel Or Enable Multi-Video Display (For Multi-Pack Only)
Selecting a camera channel or Enable Multi- video display (for multi-pack only) The Parent unit has 4 camera channels ( ) from which the video can be displayed and the audio heard. Each Camera unit is paired with a camera number 1, 2, 3 or 4 when it is registered to the parent unit, and the parent unit shows the number of the selected channel at the top right of the display. -
Page 15: Adjusting The Volume Of The Parent Unit
Adjusting the volume of the parent unit When the video is playing or in standby mode, press to decrease volume or to increase volume. The display will show the current volume setting for 5 seconds. NOTE The parent unit also provides a visual indication of the sound level detected at the Camera unit, regardless of the volume setting. -
Page 16: Mbp31, Mbp31 Twin, Mbp31 Triple, Mbp31 Quad Parent Unit Menu Options
LCD screen. Press to turn the Camera unit Night Vision On or Off. The infrared night vision capability on the Camera unit will be switched on and off accordingly. MBP31, MBP31 Twin, MBP31 Triple, MBP31 Quad Parent Unit Menu Options... -
Page 17: Disposal Of The Device (Environment)
Dispose of the battery pack in an environmentally-friendly manner according to your local regulations. 6. Cleaning Clean the MBP31, MBP31 Twin, MBP31 Triple, MBP31 Quad with a slightly damp cloth or with an anti-static cloth. Never use cleaning agents or abrasive solvents. -
Page 18: Help
7. Help Display No display • Try recharging or replacing the battery pack. • Reset the units. Disconnect the battery pack of the parent unit and unplug both the units’ electrical power, then plug them back in. • Is the unit turned on? Press and release on the parent unit to turn it on. -
Page 19: General Information
To order a replacement battery pack, contact customer service or visit our website. Consumer Products and Accessories Limited Warranty ("Warranty") Thank you for purchasing this Motorola branded product manufactured under license by Binatone Electronics International LTD ("BINATONE"). What Does this Warranty Cover? Subject to the exclusions contained below, BINATONE warrants that this Motorola branded product ("Product") or certified accessory... - Page 20 CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OF IMPLIED. IN NO EVENT SHALL MOTOROLA OR BINATONE BE LIABLE, WHETHER IN CONTRACT OR TORT (INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT OR ACCESSORY,...
- Page 21 (c) use of the Products or Accessories for commercial purposes or subjecting the Product or Accessory to abnormal usage or conditions; or (d) other acts which are not the fault of MOTOROLA or BINATONE, are excluded from coverage. Use of Non-Motorola branded Products and Accessories. Defects...
- Page 22 Unauthorized Service or Modification. Defects or damages resulting from service, testing, adjustment, installation, maintenance, alteration, or modification in any way by someone other than MOTOROLA, BINATONE or its authorized service centers, are excluded from coverage. Altered Products. Products or Accessories with (a) serial numbers or date tags that have been removed, altered or obliterated;...
-
Page 23: Fcc And Ic Regulations
representations made by any agent employee or staff of BINATONE, that may have been made in connection with the said purchase. FCC and IC regulations FCC Part l5 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules. - Page 24 This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this equipment.
- Page 25 Le présentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitationestautorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareildoit accepter tout brouillage radioélectriquesubi, mêmesi le brouillageest susceptible d'encompromettre le fonctionnement. This Class B digital apparatus complies with Canadian ICES-003.
-
Page 26: Technical Specifications
Technical Specifications Camera unit Frequency 2.4GHz to 2.4835GHz Image sensor Colour CMOS Lens f 2.5mm, F 2.8 IR LED 9 pcs Power Adaptor: By Keenocean; Type: S04-003-0050-00600; Input: 100-240VAC, 50/60Hz Output: 5V, 600mA Adaptor: By Ten Pao Industrial Co., Ltd. Type: S004LB0500060 (for UK) S004LV0500060 (for EU) - Page 27 Parent unit Frequency 2.4GHz to 2.4835GHz Display 2.4" TFT LCD Display colours 16.7M colour LCD Brightness 5 steps control Power Adaptor: By Keenocean; Type: S04-003-0050-00600; Input: 100-240VAC, 50/60Hz Output: 5V, 600mA Adaptor: By Ten Pao Industrial Co., Ltd. Type: S004LB0500060 (for UK) S004LV0500060 (for EU) S004LU0500060 (for US) Input: 100-240VAC, 50/60Hz...
-
Page 29: Wall Mounting Instructions
9. Wall mounting instructions Use the template below to mark the wall in the correct places to drill holes for wall-mounting screws (not supplied). headscrew head screw 60.00mm (Tolerence 1.0mm) 9.5mm headscrew head screw Wall mounting instructions... - Page 31 Insert 4mm head screws (not supplied) into the holes and tighten the screws. Then, align your Camera unit with the screws and push it down. Point the camera lens towards the area you want to monitor. Adjust the Camera unit until you are satisfied with the image in the parent unit.
- Page 32 MOTOROLA and the Stylized M Logo, are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. All other trademarks are the property of their respective owners. © 2012 Motorola Mobility LLC. All rights reserved. Version 1.0 Printed in China...