电子技术资料网 Dell E153FPc Service Manual 15” LCD MONITOR DELL E153FPc THESE DOCUMENTS ARE FOR REPAIR SERVICE INFORMATION ONLY.EVERY REASONABLE EFFORT HAS BEEN MADE TO ENSURE THE ACCURACY OF THIS MANUAL; WE CANNOT GUARANTEE THE ACCURACY OFTHIS INFORMATION AFTER THE DATE OF PUBLICATION AND DISCLAIMS RELIABILITY FOR CHANGES, ERRORS OR OMISSIONS.
电子技术资料网 Dell E153FPc Revision List Revision Release Date Revise History TPV model T560KCLHM8DLN Mar.-11-2005 Initial Release T560KCLHM8DRN Add “Important Safety Notice” Nov.-22-2005 Add” Definition Of Pixel Defects” Mar.-31-2006 Add” Max Brightness measurement” on April-25-2006 Page42 Mar.-30-2007 Add Mechanical Instruction in item 6 Downloaded from www.Manualslib.com...
REFER TO BACK COVER FOR IMPORTANT SAFETY GUIDELINGS Proper service and repair is important to the safe, reliable operation of all Dell Company** Equipment. The service procedures recommended by Dell and described in this service manual are effective methods of performing service operations.
电子技术资料网 Dell E153FPc 1. Monitor Specifications Driving system TFT Color LCD Size 38cm(15.0") Pixel pitch 0.297mm(H) x 0.297mm(V) LCD Panel û û Viewable angle (H) 100 Brightness 200cd/m (Min) Response time (typ.) 16 ms Video Analog Only Sync. Type H/V TTL Separate and Composite Sync.
电子技术资料网 Dell E153FPc 2. LCD Monitor Description The LCD MONITOR will contain a main board, an inverter/power board, keypad board, which house the flat panel control logic, brightness control logic and DDC. The power board will provide AC to DC Inverter voltage to drive the backlight of panel and the main board chips each voltage.
电子技术资料网 Dell E153FPc 3. Operation instructions 3.1 General Instructions Press the power button to turn the monitor on or off. The other control buttons are located at front panel of the monitor. By changing these settings, the picture can be adjusted to your personal preferences.
电子技术资料网 Dell E153FPc 3.3 Adjusting the Picture To set the OSD menu, perform the following steps: Briefly press the SELCT / MENU button to activate the OSD menu. The main menu appears on the screen with icons for the setting functions.
电子技术资料网 Dell E153FPc Adjusting the brightness and contrast Calling the Brightness / Contrast setting window using Brightness button. Setting the brightness of the display Brightness With this function you change the brightness of the background lighting. Setting the contrast of the display Contrast With this function you modify the contrast of bright color tones.
电子技术资料网 Dell E153FPc Setting display of the OSD menu Calling the OSD Set up setting window Horizontal Setting the horizontal position of the OSD menu Position With this function you move the OSD menu to the left or to the right.
电子技术资料网 Dell E153FPc 4.3 Power Supply Requirements A/C Line voltage range 100 V ~ 240 V± 10 % 50 ± 3Hz, 60 ± 3Hz A/C Line frequency range Input Voltage transients 280 volts AC for 10 sec @40℃ Current 0.6A max.
Page 13
电子技术资料网 Dell E153FPc 4.4.3 Optical Characteristics The optical characteristics are measured under stable conditions as follows: Downloaded from www.Manualslib.com manuals search engine...
Page 18
电子技术资料网 Dell E153FPc MCU Initializes. 2) Is the EEprom blank? 3) Program the EEprom by default values. 4) Get the PWM value of brightness from EEprom. 5) Is the power key pressed? 6) Clear all global flags. 7) Are the AUTO and SELECT keys pressed? 8) Enter factory mode.
电子技术资料网 Dell E153FPc 5.3 Electrical Block Diagram 5.3.1 Main Board Downloaded from www.Manualslib.com manuals search engine...
Page 20
电子技术资料网 Dell E153FPc 5.3.2 Inverter/Power Board AC input Bridge Rectifier Transformer Rectifier CMOS EMI filter and Filter MOSFET Start Circuit Q903 R906, R907 CON102 Voltage Feedback Over Circuit Control IC Voltage Protect ON/OFF OSC and MOSFET DC Convert Output...
电子技术资料网 Dell E153FPc 6. Mechanical Instruction Tools: 2 Power screwdrivers (φ=5mm,L=60mm); 1 small cross screwdriver; turnbuckle driver; Setting: Power screwdriver torque A=11 kgF. Cm; torque B=6 kgF. Cm Remark Rear cover Remove stand: Remove the 4 screws and remove the stand ass’y by...
Page 22
电子技术资料网 Dell E153FPc Cable hook Remove bezel: Key board Disconnect the Key board connector and remove the bezel Note: When installing monitor fixes the cable use Black Adhesive Tape and screw shield the cable hook. Remove the small shield:...
Page 23
电子技术资料网 Dell E153FPc Remove the main frame: Disconnect the back light connectors Remove the four screws and remove the main frame by manual or torque = 3kgF.Cm LVDS cable Remove the main frame and at the same time disconnect the LVDS connector Downloaded from www.Manualslib.com...
Page 24
电子技术资料网 Dell E153FPc Black Adhesive Tape When installing monitor. Fix the LVDS by Black Adhesive Tape. 10mm should be kept between the tape and the connect end. Power board Mylar Remove the Power board and main board: Main board...
Page 25
电子技术资料网 Dell E153FPc The end Lay the FFCL as the figure show Downloaded from www.Manualslib.com manuals search engine...
电子技术资料网 Dell E153FPc 9. Maintainability 9.1 Equipments and Tools Requirement 1. Voltage meter 2. Oscilloscope 3. Pattern Generator 4. LCD Color Analyzer 5. Service Manual 6. User Manual Downloaded from www.Manualslib.com manuals search engine...
电子技术资料网 Dell E153FPc 9.2 Trouble shooting 9.2.1 Main Board No Display Check Power board, is there DC level output? Measured CN104 pin5 = 5 V? Check U105 pin3=5V, U105 pin2=3.3V? Measured U101 pin 44= 5V? Is there any shortage or cold solder? Measured U105 pin 2= 3.3V?
Page 37
电子技术资料网 Dell E153FPc Panel Power Circuit Check the PPWR panel power relative circuit, Q105, Q104 In normal operation, Check R172 should have response from when LED =green, R172 should =5V 0V to 5V when we switch the power If PPWR no-response when the power switch...
Page 38
电子技术资料网 Dell E153FPc U102-date Output Measured DCLK (pin 57 from U102) DVS, DHS (pin 54,55 from U102) Is the waveform ok? DCLK around 48 MHZ, DVS=60.09Hz, DHS around 80 Replace ZAN3XL (U102) or KHz? (Refer to input signal=640x480@60 Hz, and LED is replace Main board.
Page 39
电子技术资料网 Dell E153FPc 9.2.2 Inverter/Power Board No Power Check to CN102 Pin12=12V Check Interface board Check AC line volt 110V or 220V Check AC line Check the voltage of C904(+) Check F901, bridge rectified circuit Check start voltage for the pin3 of IC901...
Page 40
电子技术资料网 Dell E153FPc No Backlight Check C201(+) =12V Change F902 Check D201/Q209/Q210 Check ON/OFF signal Check Interface board Check U201 pin9=12V voltage of C905(+) Change Q201 or Q202 Check the pin1 of U201 have saw tooth wave Change U201 Check D201 (-) have the output of square wave at short time.
Page 41
电子技术资料网 Dell E153FPc 9.2.3 Key Board OSD is unstable or not working Is Keypad board connecting normally Connect Keypad Board Is Button Switch normally Replace Button Switch Is Keypad board normally Replace Keypad Board Check main board Downloaded from www.Manualslib.com...
电子技术资料网 Dell E153FPc 10. White balance, Luminance adjustment Approximately 2 Hours should be allowed for warm up before proceeding White-Balance adjustment. Before started adjust white balance, please setting the Chroma-7120 MEM. Channel 3 to 6500 K colors, MEM. Channel 4 to 9300 K colors, MEM.
电子技术资料网 Dell E153FPc 11. EDID Content 12. ISP (In System Program) User Manual 12.1 Connect ISP Writer preparation action Connect RXD and TXD of PC to RXD (P3.0) and TXD (P3.1) of CPU through RS-232. a. There are two ways to entering Reboot Mode. The settings for Reboot Mode is as follow Both P2.6 P2.7 are LOW and RESET pin is HIGHT.
电子技术资料网 Dell E153FPc 12.2 To Use ISP WRITER Press the “–“ key at front bezel and plug the AC power cord in, then the MCU enter ISP mode; a. You will enter the window as follow after executing the ispwriter.exe file.
Page 46
电子技术资料网 Dell E153FPc c. Click the “Select Bank0” button and selecting a file which a binary Format required. Downloaded from www.Manualslib.com manuals search engine...
Page 47
电子技术资料网 Dell E153FPc d. Select the communication Setting: Port Name e. Click the “ConNect” button. Downloaded from www.Manualslib.com manuals search engine...
电子技术资料网 Dell E153FPc f. Click “Program all” to start programming. 12.3. Executing ISP a. “Program All” button that will execute erase and program and verify. Then you can get the window as follow, and click “OK” to complete ISP process.
电子技术资料网 Dell E153FPc 13. BOM List Different Parts List Part NO Description Quantity Unit Remark 750LLC50G091ZB CPT 15" 021 ZB PANEL For T560KCLHM8DLN model 750LLC50G092ZB CPT 15" 011 ZB PAMEL For T560KCLHM8DRN model For T560KCLHM8DRN model Location Part NO...