Advertisement
Quick Links
Field and Software Tools
CalMaster2
Quick Start Guide
IM/VCM2/QRG Issue 2
1
Introduction
CalMaster IRIS and CheckMaster are stand-alone verification and
validation tools within the CalMaster2 Verification Suite.
There are two options of CalMaster2 available:
!
CalMaster IRIS
Enables the printing of service reports and certification to
within 1% of factory calibration (fingerprinted flow meters) or
2% (non-fingerprinted flow meters). Predictive diagnostics are
also provided to provide early warning of a possible system
failure,
enabling
maintenance
problems and take planned remedial action in advance.
CalMaster2 comprises:
–
CalMaster IRIS Verification Tool
–
Enhanced IRIS Software
!
CheckMaster
Enables the validation of flow meters and the printing of a
service report.
CheckMaster comprises:
–
CheckMaster Validation Tool
–
IRIS Software
2
Unpacking
Unpack and visually inspect the CheckMaster.
Also packed with the CheckMaster are:
!
CalMaster2 IRIS software CD.
!
Instruction manual.
!
Mains-operated battery charger & in-car adaptor
!
5 MagMaster adaptors kits (Part no. WADX0089):
Sensor
Cable
Plug
!
CheckMaster Leads:
AquaMaster Communications Leads
(Red and yellow numeric sleeves)
AquaMaster Explorer Leads
engineers
to
anticipate
(Red numeric sleeves)
MagMaster Leads
(Yellow numeric sleeves)
AquaMaster 7-way Output Cable
AquaMaster MIL Connector Leads
(Green numeric sleeves)
MagMaster Connection Lead 2
MagMaster
VKE
Adaptor
Connection Lead 1
WEBC2000 for RS232 Serial
WEBC0221
Communications WEBC2000
AquaMaster Transmitter
AquaMaster Transmitter
Connection Lead 2
Connection Lead 3
WEBC0222
WEBC0223
AquaMaster MIL
AquaMaster 19-way
Sensor Cable
Output Cable
WEBC0233
WEBC235
AquaMaster 7-way Output Cable
WEBC0234
WEBC0232
MagMaster Connection Lead 3
WEBC0212
WEB0C213
AquaMaster Transmitter Connection Lead 2
WEBC211
Advertisement
Related Manuals for ABB CalMaster2
Summary of Contents for ABB CalMaster2
- Page 1 AquaMaster Communications Leads CalMaster2 (Red and yellow numeric sleeves) CalMaster IRIS and CheckMaster are stand-alone verification and validation tools within the CalMaster2 Verification Suite. There are two options of CalMaster2 available: CalMaster IRIS Enables the printing of service reports and certification to...
- Page 2 Follow the on-screen instructions to install. calmaster@gb.abb.com automatically or a PDF is created: To run the software, select Start | Programs | ABB | CalMaster2. – If an e-mail was sent, a response is received within 24 hours. A confirmation message that the e-mail has Refer to the instruction manual (IM/VMC2) for complete details of been sent appears.