Attaching The Cables: Hp W19 Lcd Monitor; Cable Connections On Back Of Monitor And Computer - HP w19 User Manual

Hide thumbs Also See for w19:

Table of Contents

Back to Contents Page

Attaching the Cables: HP w19 LCD Monitor

Turn off your computer before performing the procedure below.

1 Connect the power adapter DC cable to the DC-In port on the back of the monitor.

2 Connect one end of the 15-pin D-Sub (VGA) cable to the back of the monitor and connect the other end to the

computer's D-Sub port.

3 Plug the power cable of your monitor into a nearby outlet. Plug the other end of the power cord into the power

adapter.

4 (Optional – Requires a video card with DVI port) — Connect one end of the 24-pin DVI cable to the back of the

monitor and connect the other end to the computer's DVI port.

5 Turn on your monitor and computer.

If your monitor displays an image, installation is complete. If it does not display an image, see

and

Using the

Monitor.

Technical Support FAQ

Table of Contents