Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Toshiba e-Studio 60F
Summary of Contents for Toshiba e-Studio 60F
- Page 1 Networking Documents.
-
Page 2: Description Of The Machine
Description of the machine Symbols on the display Selected options will be highlighted with an arrow (»). resolution: f for text and graphics % for very small print and graphics F for photographs ; on: faxes will be received automatically blinking: faxes are stored in the memory off: memory is full or faxes will be received with a modem : transmission of faxes or SMS... -
Page 3: Overview Of Functions
Overview of functions K colour copy Z scan to PC i help X stop, turn stand-by mode K black-and-white copy W send an SMS; the lamp next to the key will flash when mes- sages are received v If this symbol flash- es please read the display a call up directory... -
Page 4: Table Of Contents
Contents Safety instructions ... 5 Installation... 6 Unpacking ... 6 Set-up... 6 Loading paper ... 7 Connections ... 7 Additional devices ... 7 Power supply... 7 Country selection ... 8 Inserting cartridges... 8 Cartridge alignment... 9 Your name and number ... 9 Time and date ... -
Page 5: Safety Instructions
Safety instructions Please read and follow all warning notices and instruc- tions. The e-STUDIO60F should be installed on a level and stable surface. The surface should be smooth and hori- zontal. The machine may be damaged if it falls and may cause serious injury, especially to small children. -
Page 6: Installation
Installation Unpacking Unpack the box and check that it includes the follow- ing: telephone cable network cable power supply ink cartridges and chip card “Plug ’n Print” paper tray machine user guide installation guide CD-ROM Set-up Please read all warning notices and instructions and follow them precisely. -
Page 7: Loading Paper
Loading paper Please use only paper which is specifically intended for use with ink cartridge printers (standard format is A4 210×297 mm, 80 g/m²). Follow the instructions of the manufacturer. Do not load paper while the e-STUDIO60F is printing! 1 To prevent several sheets being drawn into the ma- chine at once, first fan out the paper to separate the sheets and then straighten the stack on a flat sur- face before inserting it into the paper feed. -
Page 8: Country Selection
v If you want to connect the e-STUDIO60F to a PC, please refer to the chapter PC connection. You must install the software first and then connect the e-STUDIO60F to the PC! After you have connected the e-STUDIO60F to the mains, it will prompt you to make some basic settings as follows. -
Page 9: Cartridge Alignment
If you receive a warning message that the pe- ripheral hasn’t passed Windows Logo testing, choose “Continue Anyway”. Your multifunctional device has been tested for TOSHIBA and is fully compatible with Windows XP. 1 Insert the CD-ROM into your PC. The installation procedure will start automatically. - Page 10 4 Click “Next” and follow the instructions on the screen. You will be prompted to accept a license agreement. After the installation has finished, the PC has to be rebooted.
-
Page 11: Settings
Settings You can print out a list of the current parameter settings by pressing M, 54 and OK. v To return to stand-by mode, press X as often as necessary. Date and time 1 Press M, 21 and OK. 2 Enter the date and time and confirm with OK, e. g. 12 09 03 16 30 OK for September 12 2003, 4:30 p. -
Page 12: Directory
Directory Your e-STUDIO60F lets you create a directory by mem- orising single entries and lists of entries. Your machine can store up to 200 entries with names and fax numbers. You may also group several names together to create a list. When entering a name, you can use + to type capital letters (press and hold the + key and type the desired key). -
Page 13: Fax
Sending a fax Y There are two ways to fax a document: You can place it onto the scanner glass (flatbed scanner) directly or load it into the automatic document feeder. Flatbed scanner 1 Open the flatbed scanner cover. Please make sure that the scanner glass is clean before placing the original. -
Page 14: Redial L
2 Press a and use /, a letter or a number key to choose a record or a list from the directory. 3 Press Y to start the transmission. Redial L The last ten numbers dialled on the e-STUDIO60F will be stored in the redial memory. -
Page 15: Delayed Transmission
WITHOUT—no transmission report; however, your e-STUDIO60F notes all transmissions that took place in its log (see Hints & tips / Logs). ALWAYS—a report is printed with each transmission. ON ERROR—a report is only printed if the transmission failed or is abandoned. 2 Confirm with OK. -
Page 16: Copy
Copy Inserting a document There are two ways to copy a document: You can place it onto the scanner glass (flatbed scanner) directly or load it into the automatic document feeder. Flatbed scanner 1 Open the flatbed scanner cover. Please make sure that the scanner glass is clean before placing the original. - Page 17 FAST—for good quality documents, without drawings or small details NORMAL—for documents with drawings or small char- acters QUALITY—for maximal resolution Press OK. 5 Your e-STUDIO60F can reduce or magnify a spe- cific part of a document from 25% to 400%. Set the desired zoom value with the key pad and press 6 You can change the origin of the flatbed scanner (by default, this is the back left angle of the scanner...
-
Page 18: Scan To Pc
Scan to PC You can use the e-STUDIO60F to scan documents and edit the document with a PC (see Installation / PC con- nection). Inserting a document There are two ways to scan a document: You can place it onto the scanner glass (flatbed scanner) directly or load it into the automatic document feeder. - Page 19 Click on the lower left icon to create a preview, click on the lower right icon to start scanning. Click on “Profile” to create different profile for different document types you want to scan. A profile contains all important settings for a certain type of document. To create a profile, first make all settings and then choose “New”...
-
Page 20: Sms
Your e-STUDIO60F lets you send SMS messages all over the world. SMS (Short Message Service) was orig- inally devised for mobile communication, but it is now available in many countries via regular telephone lines. Availability of the SMS service depends on the coun- try and operator. -
Page 21: Advanced Settings
Advanced settings Settings list You may print a list of your e-STUDIO60F’s parameter settings to monitor any changes made to the default parameters! Press M, 54 and OK. Fax settings Reception mode If you want to receive fax messages with a modem (with a PC) connected on the same telephone line as the e-STUDIO60F, you must disable automatic fax re- ception. -
Page 22: Printer Settings
Saturation is the colour judged in proportion to its brightness: closer to - is greyer, + has greater satura- tion. M, 276, OK—RGB All colours can be defined as combinations of red (R), green (G) and blue (B). You can change the values for each of these basic colours. -
Page 23: Hints & Tips
Change cartridges The display will indicate if one of the cartridges is emp- Please use only original TOSHIBA ink cartridges! 1 Open the machine by pulling the lever under the control panel. -
Page 24: Cartridge Capacity
3 Open the cartridge holder. 4 Remove the empty cartridge. 5 Take the ink cartridge out of its packaging and re- move the protective strip. Be careful not to touch the nozzles and the contacts. 6 Insert the cartridge with the contacts forward and the “nose”... -
Page 25: Lock
TX—transmission DOC—in deposit POL—polling TR—ongoing commands SMS—SMS transmission Press M, 62 and OK. Use / to select a document from the waiting queue and confirm with OK. Modify the parameters and confirm with OK. Immediate transmission Press M, 61 and OK. Use / to select the docu- ment in the waiting queue and confirm with Y or OK to immediately perform the selected fax or SMS trans- mission. - Page 26 2 Use a cloth to lightly wipe the scanner glass (A). 3 Close the scanner. Cleaning and aligning the cartridges If the quality of printed documents deteriorates, the cartridges should be cleaned and aligned. 1 Press M, 72111 and OK. The cartridge will be cleaned automatically.
-
Page 27: Annex
Annex Functions list Press M, 51 and OK to print a function list. The list will be printed. Directory 11 ADD NAME... 12 Add a name with a number to the directory 12 ADD LIST... 12 Join several directory entries to form a list 13 MODIFY... -
Page 28: Technical Settings
For the avoidance of doubt, nothing in this notice shall be taken to exclude or limit TOSHIBA TEC Germany Imaging Systems GmbH’s liability for death or personal injury caused by TOSHIBA TEC Germany Imaging Systems GmbH’s negligence or... -
Page 29: Declaration Of Conformity (Doc)
• whatsoever and howsoever caused which arise out of or in connection with the Product or the use or handling of the Product even if TOSHIBA TEC Ger- many Imaging Systems GmbH is advised of the possibility of such damages. -
Page 31: Index
Index fax 12 fax answering device 13 fax settings 20 additional devices 7 fax without paper 20 additional telephone 10, flatbed scanner 17 functions 3 add list 11 functions list 26 add name 11 aligning the cartridges 24 answering device 13 help 3 answer code 13 horizontal stripes 22... - Page 32 TOSHIBA TEC Germany Imaging Systems GmbH Carl-Schurz-Straße 7 41460 Neuss, Germany Tel.: +49 (0) 2131 1245-0 Fax: +49 (0) 2131 1245-402 www.toshiba-europe.com/tec...