Asus RT-AC66U Configuration Manual

Fibre configuration

Hide thumbs Also See for RT-AC66U:

Download this manual

Asus RT-AC66/88U Fibre configuration

Ensure the Router is connected from WAN on Router to GE1 on ONT.

Log into the gateway:

1. Ensure your device is connected to the Router (preferably via cable)

2. Open a web browser

3. Type the following in the address bar at the top: 192.168.1.1

4. Default Username: admin

5. Default Password: admin

This should then give access to the routers user interface.**

**(If the password is incorrect you will need to Factory Reset the router by pushing the Inset Reset

button on the back for 10 seconds)

How to add correct settings for the NOW network:

1. From the menu on the left select: WAN (Under Advanced Settings)

Change the following Settings:

1. WAN Connection Type: PPPoE

2. Enable WAN: Yes

3. Enable NAT: Yes

4. Enable UPnP: Yes

5. Get The WAN IP Automatially: Yes

6. Connect to DNS Server Automatically: Yes

7. User Name: (your NOW account ID)@nownz.co.nz

8. Password: password

9. MTU: 1492

10. MRU: 1492

11. All else can be left unchanged

12. Select: Apply

The Router should now Reboot

You should now be connected to Fibre!

If you have no internet access, give NOW Techncial Support a call.

Aug - 2017

Page 1 Asus RT-AC66/88U Fibre configuration Ensure the Router is connected from WAN on Router to GE1 on ONT. Log into the gateway: 1. Ensure your device is connected to the Router (preferably via cable) 2. Open a web browser 3. Type the following in the address bar at the top: 192.168.1.1 4.
Page 2 Aug - 2017...

Rt-ac88u