Page 1 If you need assistance: ❖ InTouch Calling within the United States (800) 457-7777 Calling from outside the United States (949) 859-4273 For more information, see page 173 in this guide. TOSHIBA ® 1130/1135 ® Center “If Something Goes Wrong” on C6638-0303M1...
Page 2 If you fail to do so, this product may not function properly and you may lose data or suffer other damage. TOSHIBA AMERICA INFORMATION SYSTEMS (“TOSHIBA”), ITS AFFILIATES AND SUPPLIERS DO NOT WARRANT THAT OPERATION OF THE PRODUCT WILL BE UNINTERRUPTED OR ERROR FREE.
Page 3: Fcc Notice
: Only peripherals complying with the FCC Class B limits may be attached to this equipment. Operation with noncompliant peripherals or peripherals not recommended by Toshiba is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer's or expansion unit’s serial port, parallel port, monitor port, USB port,...
Page 4: Type Of Service
Contact: Toshiba America Information Systems, Inc. 9740 Irvine Blvd. Irvine, CA 92618-1697 (949) 583-3000 Industry Canada Requirement This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conformé à la norme NMB-003 du Canada.
Page 5: If Problems Arise
FCC. In the event repairs are ever needed on your modem, they should be performed by Toshiba Corporation, Toshiba America Information Systems, Inc. or an authorized representative of Toshiba.
Page 6: Wireless Interoperability
USOC RJ11C. Wireless Interoperability The TOSHIBA Wireless LAN Mini PCI Card products are designed to be interoperable with any wireless LAN product that is based on Direct Sequence Spread Spectrum (DSSS) radio technology, and is compliant to: ❖...
Page 7: Wireless Lan And Your Health
Regulatory Information The TOSHIBA Wireless LAN Mini PCI Card must be installed and used in strict accordance with the manufacturer’s instructions as described in the user documentation that comes with the product. This device complies with the following radio frequency and safety standards.
Page 8 Canada – Industry Canada (IC) This device complies with RSS 210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device. L ‘...
Page 9 België/ For outdoor usage only channel 10 (2457 MHz) and 11 (2462 MHz) is allowed. Belgique: For private usage outside buildings across public grounds over less than 300m no special registration with IBPT/BIPT is required. Registration to IBPT/BIPT is required for private usage outside buildings across public grounds over more than 300m.
Page 10 Caution: Exposure to Radio Frequency Radiation The Toshiba Wireless LAN Mini PCI Card will be installed with one of two types of antennas. The both of antenna types, when installed are located at...
Page 11 For both antennas, the radiated output power of the TOSHIBA Wireless LAN Mini PCI Card is far below the FCC radio frequency exposure limits. Nevertheless, the TOSHIBA Wireless LAN Mini PCI Card shall be used in such a manner that the potential for human contact during normal operation is minimized.
Page 12 DS.This equipment uses DS-SS modulation. 4.The interference range of this equipment is less than 40m. 2,400MHz to 2,483.5MHz. It is possible to avoid the band of mobile object identification systems. 3. TOSHIBA Direct PC Monday – Friday: Toll Free Tel: Direct Dial:...
Page 13: Device Authorization
❖ Consult the dealer or an experienced radio/TV technician for help. Toshiba is not responsible for any radio or television interference caused by unauthorized modification of the devices included with this Toshiba Wireless LAN Mini PCI Card, or the substitution or attachment of connecting cables and equipment other than specified by Toshiba.
Page 14 To prevent direct exposure to the laser beam, do not try to open the enclosure. Austria Denmark Iceland Luxembourg Norway Italy Portugal Card from Toshiba is far Belgium Finland Ireland Netherlands Sweden France Spain...
Page 15 This guide is copyrighted by Toshiba America Information Systems, Inc. with all rights reserved. Under the copyright laws, this guide cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed, however, with respect to the use of the information contained herein.
Page 16 Dolby and the double-D symbol are trademarks of Dolby Laboratories. TouchPad is a trademark of Synaptics, Inc. Wi-Fi is a trademark of the Wireless Capability Ethernet Alliance. Bluetooth is a trademark owned by its proprietor and used by Toshiba under license. PS/2 is a registered trademark of IBM, Inc.
Page 17 Computer Disposal Information This product contains mercury. Disposal of this material may be regulated due to environmental considerations. For disposal, reuse or recycling information, please contact your local government or the Electronic Industries Alliance at www.eiae.org.
Page 18: Table Of Contents
Contents Introduction ...26 This guide ... 26 Safety icons ... 27 Other icons used... 28 Other documentation ... 28 Service options ... 29 Chapter 1: Finding Your Way Around ... 30 Making sure you have everything ... 30 Front with the display closed ... 31 Back ...
Page 19 Precautions... 43 Setting up your computer ... 45 Setting up your software... 45 Registering your computer with Toshiba ... 46 Adding external devices ... 47 Connecting to a power source ... 47 Charging the main battery... 49 Using the computer for the first time ... 50 Opening the display panel ...
Page 20 Going into Standby mode more quickly ... 92 Starting again from Standby ... 93 Toshiba’s online resources... 93 Chapter 4: Mobile Computing ... 94 Toshiba’s energy-saver design ... 94 Running the computer on battery power ... 95 Power management ... 96...
Page 21 Charging the battery ... 96 Charging the RTC battery... 97 Monitoring battery power ... 98 Determining remaining battery power... 98 Conserving battery power ... 99 What to do when the battery runs low ... 100 Setting battery alarms... 101 Changing the main battery ... 102 Removing the battery from the computer ...
Page 22 Contents Lesson 10: Changing the screen saver... 126 Lesson 11: Setting the date and time... 128 Lesson 12: Removing objects from the desktop .. 130 Lesson 13: Using System Restore ... 132 Lesson 14: If I am lost, what do I do? ... 133 Windows Using the online tours and tutorials ...
Page 23 Uploading and downloading files Exploring video features ... 152 Changing the display properties setting ... 152 Display settings hot key ... 153 Exploring audio features ... 154 Recording sounds... 154 Using a microphone... 154 Adjusting recording settings ... 155 Using external speakers or headphones... 156 Connecting a monitor, keyboard and mouse ...
Page 24 Develop good computing habits ... 204 If you need further assistance... 205 Before you call ... 206 Contacting Toshiba ... 206 Other Toshiba Internet Web sites ... 207 Toshiba’s worldwide offices ... 208 Appendix A: Hot Keys ... 211 Volume Mute... 211 Instant password security...
Page 25 Display modes ... 216 Display brightness ... 216 Enabling a wireless device ... 217 Disabling or enabling the TouchPad... 217 Keyboard hot keys ... 217 Appendix B: Power Cable Connectors ... 218 Glossary ...219 Index ...235 Contents...
Page 26: Introduction
Your operating system offers exciting features and easy Internet access. This guide contains information about your operating system and how it functions with your Toshiba computer. For specific information on the software, see the Microsoft booklet that shipped with your computer.
Page 27: Safety Icons
If you are new to computers, or have not used a notebook computer before, read through the first couple of chapters to familiarize yourself with the components of the computer and how to turn it on. After that, seek out whatever interests you most. Safety icons This manual contains safety instructions that must be observed in order to avoid potential hazards that could result in personal...
Page 28: Other Icons Used
Guides for other programs that may come preinstalled on your computer or that are available for installation on your Recovery CDs. ❖ For accessory information, visit Toshiba's web site at toshiba.com ❖ The Microsoft which explains the features of the operating system.
Page 29: Service Options
Introduction Service options Service options Toshiba offers a full line of service options built around its SelectServ warranty programs. For more information, visit Toshiba’s Web site at toshiba.com If you have a problem or need to contact Toshiba, see “If Something Goes Wrong”...
Page 30: Chapter 1: Finding Your Way Around
Chapter 1 Finding Your Way Around This chapter presents a “grand tour” of your notebook computer. It serves as a reference when you need to locate specific parts of the computer. Making sure you have everything Before doing anything else, consult the Quick Start card provided with your system to make sure you received everything.
Page 31: Front With The Display Closed
Front with the display closed The system indicator panel provides information about various system functions. See page The display latch keeps the display panel closed and locked. To open the display panel, slide the display latch to the right and raise the panel. The DVD-ROM or multi-function drive enables you to play high-resolution, full-screen videos at up to 30 frames per second.
Page 32: Back
Finding Your Way Around Back Back S-video port* Modem port USB ports Network port The USB (Universal Serial Bus) ports allow you to connect USB peripherals to your computer. DEFINITION: USB is a peripheral expansion standard for peripherals such as keyboards, pointing devices, and monitors. USB peripherals have a single standard for cabling and connectors.
Page 33: Right Side
The DC-IN port is where you plug in the AC adapter for either operating the computer on external power or charging the battery. The cooling vent prevents the computer’s central processing unit (CPU) from overheating so that it can continue to perform at maximum speed.
Page 34: Left Side
Finding Your Way Around Left side Left side Line In jack Wireless antenna LED Wireless antenna on/off switch* Security lock slot The security lock slot allows you to attach an optional PORT- Noteworthy for securing it to a large, heavy object such as your desk. On those systems with Wi-Fi switch turns the computer’s wireless antenna on or off.
Page 35: Front With The Display Open
The speaker lets you hear sounds, such as system alarms associated with your software, and music from DVD-ROMs and audio CDs. Front with the display open Screen Function keys Keyboard Palm rest Primary control button The computer’s screen is a liquid crystal display (LCD) that provides clear, sharp images.
Page 36: System Indicator Panel
Finding Your Way Around Front with the display open The front panel provides a palm rest to assist you in maintaining proper posture while using the computer. The primary and secondary control buttons below the TouchPad act like the buttons on a mouse, with primary and secondary functions.
Page 37 determining remaining battery power, see battery power” on page The hard disk drive light flashes while the hard disk drive is being accessed. The disc/disk activity light flashes when the optional external diskette drive, or the DVD-ROM or multi-function drive is being accessed. CAUTION: Never turn off the computer while any drive is in use.
Page 38: Underside
Finding Your Way Around Underside Underside The memory slot cover protects the two expansion memory slots where you insert additional memory. See additional memory (optional)” on page 54 information. The battery pack contains the battery. For information about replacing the battery, see page 102.
Page 39: Chapter 2: Getting Started
Chapter 2 Getting Started This chapter provides tips for working comfortably, describes how to connect components, and explains what to do the first time you use your notebook computer. Selecting a place to work Your computer is portable and designed to be used in a variety of circumstances and locations.
Page 40: Keeping Yourself Comfortable
Getting Started Selecting a place to work ❖ Equipment that generates a strong electromagnetic field, such as stereo speakers (other than speakers that are connected to the computer) or speakerphones. ❖ Rapid changes in temperature or humidity and sources of temperature change such as air conditioner vents or heaters.
Page 41 twisting your torso or neck, and look at the screen without slouching. ❖ If you are using an external monitor, the top of the display should be no higher than eye level. ❖ If you use a paper holder, set it at about the same height and distance as the screen.
Page 42 Getting Started Selecting a place to work If you are using a conventional chair: ❖ Your knees should be slightly higher than your hips. If necessary, use a footrest to raise the level of your knees and ease the pressure on the back of your thighs. ❖...
Page 43: Precautions
❖ Exercise your hands, wrists, and arms to improve circulation. WARNING: Using the computer keyboard incorrectly may result in discomfort and possible injury. If your hands, wrists, and/or arms bother you while typing, stop using the computer and rest. If the discomfort persists, consult a physician.
Page 44 Getting Started Selecting a place to work too hot to the touch, if you maintain physical contact with the computer for a long time (if you rest the computer on your lap, for example), your skin might suffer low-heat injury. ❖...
Page 45: Setting Up Your Computer
Setting up your computer TECHNICAL NOTE: You must complete all set up steps up to “Setting up your software” before adding external or internal components to your computer. These components include, but are not limited to, a mouse, keyboard, printer, memory, and PC cards. Your computer contains a rechargeable high-capacity battery that needs to be charged before you can use it.
Page 46: Registering Your Computer With Toshiba
Toshiba and Microsoft. Click Yes to register, or No to exit the process. NOTE: If you click No, you may register with Toshiba later by double-clicking the Register with Toshiba icon on the desktop. Enter your personal information in the registration window.
Page 47: Adding External Devices
Adding external devices NOTE: Before adding external devices, Toshiba recommends setting up your software first. See page Before starting to use your computer, you may also want to: ❖ Add more memory (see (optional)” on page ❖ Connect a mouse (see ❖...
Page 48 CAUTION: Use only the AC adapter supplied with your computer or an equivalent adapter that is compatible. Use of any incompatible adapter could damage your computer. Toshiba assumes no liability for any damage caused by use of an incompatible adapter.
Page 49: Charging The Main Battery
Connecting the AC adapter to the computer Connect the power cable to a live electrical outlet. If the electrical outlet is live, the system indicator panel’s AC power light ( DANGER: Damaged power cables can cause fire or electric shock. Never modify, forcibly bend, place heavy objects on top of, or apply heat to the power cable.
Page 50: Using The Computer For The First Time
Getting Started Using the computer for the first time TECHNICAL NOTE: The battery does not charge while the computer is consuming full power. CAUTION: Once the battery is charged for the first time, avoid leaving the computer plugged in and turned off for more than a few hours at a time.
Page 51: Turning On The Power
CAUTION: To avoid damaging the display panel, do not force it beyond the point where it moves easily. Never lift or move the computer using the display panel. Turning on the power Check that any drives on the computer are empty. Turn on the computer by pressing and releasing the power button located on the top of the keyboard.
Page 52: Using The Touchpad
Getting Started Using the computer for the first time Using the TouchPad The TouchPad, the small, smooth square cutout located in front of the keyboard, is sensitive to touch and enables you to move the cursor with the stroke of a finger. Simply move your finger on the TouchPad in the direction you’d like to move the cursor: ❖...
Page 53: Disabling Or Enabling The Touchpad
The function of the secondary (right-hand) button depends on the program you are using. It usually corresponds to the right mouse button. Check your program’s documentation to find whether it uses the right mouse button. Disabling or enabling the TouchPad The TouchPad is enabled by default.
Page 54: Installing Additional Memory (Optional)
Additional memory comes in various capacities (visit Toshiba’s Web site at are two memory slots. Your system may have both slots occupied. CAUTION: If you use the computer for a long time, the memory modules will become hot.
Page 55 Installing additional memory (optional) You need a standard Phillips no. 1 screwdriver to install a memory module. CAUTION: To avoid damaging the computer’s screws, use a standard Phillips no. 1 screwdriver that is in good condition. If you are adding memory after you have started to use the computer, begin at step 1, otherwise skip to step 2.
Page 56 Getting Started Installing additional memory (optional) Removing the memory slot cover Put the screws and the cover in a safe place so that you can retrieve them later. CAUTION: Static electricity can damage the memory module. Before you handle the module, touch a grounded metal surface to discharge any static electricity you may have built up.
Page 57 Place the optional Wi-Fi module to the side to expose the memory module slots. NOTE: Do not remove the Wi-Fi antenna wires. For assistance, contact a Toshiba Authorized Service Provider. The following figure shows the inside of the memory compartment.
Page 58 Getting Started Installing additional memory (optional) Holding the memory module by its edges so that the gold connector bar faces the slot, fit the module into the socket. Gently put the memory module connector down at an angle and press down until the clips snap into place. Do not force the module into position.
Page 59: Removing A Memory Module
Replace the screws and tighten them. Turn the computer over and reconnect any cables you removed. Turn on the computer. To verify that the computer correctly recognizes the memory, click Start, Control Panel and click Performance and Maintenance. Click System to view the recognized memory.
Page 60: Connecting A Mouse
Getting Started Installing additional memory (optional) Connecting a mouse You may want to use a mouse instead of the TouchPad, the computer’s built-in pointing device. To connect a USB mouse, plug the mouse cable into one of the USB ports. Connecting a printer You can connect a USB-compatible printer to your computer through the USB ports.
Page 61: Setting Up A Printer
Setting up a printer If you started your computer with a printer connected and turned on, it may have been detected automatically (Plug and Play). If this is not the case, then you must install the printer driver for the model of printer that is connected to your computer.
Page 62 Getting Started Installing additional memory (optional) Sample Add Printer Wizard Click Next. The Add Printer Wizard asks you to select your printer. TECHNICAL NOTE: If your printer is Plug and Play, the operating system recognizes it automatically. You can ignore the remainder of this section.
Page 63 Installing additional memory (optional) Click Next. The Add Printer Wizard prompts you to select your printer. From the list of manufacturers and printers, select your printer, then click Next. Select the port settings according to the instructions in your printer’s documentation and the port to which your printer is connected, then click Next.
Page 64: Turning Off The Computer
Getting Started Turning off the computer Turning off the computer It is a good idea to turn off your computer when you are not using it for a while. If you are using the computer for the first time, leave the computer plugged into a power source (even though the computer is off) to fully charge the main battery.
Page 65: Caring For Your Computer
Although your notebook computer is built to withstand reasonable shock and vibration, transport it in a carrying case for long trips. You can purchase a carrying case from your Toshiba dealer or visit Toshiba’s Web site at Getting Started Caring for your computer...
Page 66: Using A Computer Lock
Getting Started Caring for your computer Using a computer lock You may want to secure your computer to a heavy object such as your desk. The easiest way to do this is to purchase an optional PORT-Noteworthy PORT-Noteworthy To secure the computer: Loop the cable through or around some part of a heavy object.
Page 67: Chapter 3: Learning The Basics
Chapter 3 Learning the Basics This chapter lists some computing tips and provides important information about basic features. Computing tips ❖ Save your work frequently. Your work temporarily stays in the computer’s memory until you save it to the disk. You will lose all unsaved work, if, for example, a system error occurs and you must restart your computer, or your battery runs out of charge while you are working.
Page 68: Using The Keyboard
Learning the Basics Using the keyboard ❖ Back up your files to storage media on a regular basis. Label the backup copies clearly and store them in a safe place. If your hard disk suddenly fails, you may lose all the data on it unless you have a separate backup copy.
Page 69: Character Keys
Character keys Typing with the character keys is very much like typing on a typewriter, except that: ❖ The spacebar creates a space character instead of just passing over an area of the page. ❖ The lowercase l (el) and the number 1 are not interchangeable.
Page 70: Windows Special Keys
Learning the Basics Using the keyboard Windows special keys ® ® Windows special keys The keyboard provides two keys that have special functions in the operating system: ❖ The Windows ❖ The Application key has the same function as the secondary TouchPad control button (or secondary mouse button).
Page 71 Using the numeric keypad overlay To turn on the numeric keypad overlay, press simultaneously. The numeric mode light on the keyboard indicator panel glows when the numeric overlay is on. You can still use the overlay keys to type alphabetic characters while the numeric overlay is on.
Page 72: Starting A Program
Learning the Basics Starting a program To turn off the cursor control overlay, hold down the and press keyboard indicator panel goes out. Starting a program The easiest way to start a program is to double-click the name of the file that contains the information you want to work on. To find the file, use My Computer or Windows Explorer.
Page 73: Printing Your Work
To save: ❖ A file you are updating, open the program’s File menu and click Save. ❖ A new file, choose Save As from the File menu, type a name for the file, and click OK. HINT: To make another copy of the file you are currently working with, choose Save As from the File menu and give the new file a different name.
Page 74: Backing Up Your Files
Learning the Basics Backing up your files Backing up your files Backing up your files means copying individual files to media, such as CD, or copying entire sections of your hard disk to another device, such as a tape drive. For those systems with a floppy disk drive, you may back up file to a floppy disk as follows: To back up to a CD or other media, insert the media into...
Page 75: Dvd-Rom Drive Components
Using the DVD-ROM or Multifunction drive For these reasons, your computer may come with a DVD- ROM or multifunction drive. HINT: Your DVD-ROM or Multifunction drive is designed to play region 1 (North America) DVD-ROMs. NOTE: For optimum DVD performance, it is recommended that you play DVDs while running the computer on AC power.
Page 76: Inserting A Disc
Learning the Basics Using the DVD-ROM or Multifunction drive The eject button requires power to operate. The manual eject button does not require power. CAUTION: Never use a pencil to press the manual eject button. Pencil lead can break off inside the computer and damage it. Instead, use a slim object such as a straightened paper clip.
Page 77 Using the DVD-ROM or Multifunction drive Carefully place the disc in the empty tray with its label facing up. Inserting a disc CAUTION: Be careful not to touch the drive’s lens (located underneath the drive’s spindle) or the area around it. Doing so could cause the drive to malfunction.
Page 78: Playing An Audio Cd
Learning the Basics Using the DVD-ROM or Multifunction drive Close the disc tray by pressing gently on the center of the tray until it clicks indicating that it is locked. Playing an audio CD Insert an audio CD and close the disc tray. The computer automatically detects a disc in the drive and opens the Audio CD window.
Page 79 Using the DVD-ROM or Multifunction drive Rewind Play Stop Previous track Next track Mute Sample Windows Media The Windows Media an ordinary compact disc player: ❖ To play the CD or to pause, click the Play/Pause button on the CD Player control panel. ❖...
Page 80: Playing A Dvd
Learning the Basics Using the DVD-ROM or Multifunction drive Playing a DVD This manual has an entire chapter devoted to using WinDVD. For information about how to play back a DVD, see DVDs” on page Viewing the contents of a CD or DVD CDs and DVDs contain files just like the hard disk.
Page 81: Removing A Disc With The Computer Off
Using the DVD-ROM or Multifunction drive Removing a disc with the computer off Insert a slender object, such as a straightened paper clip, into the manual eject button access hole. CAUTION: Never use a pencil to press the manual eject button. Pencil lead can break off inside the computer and damage it.
Page 82: Setting Up For Communications
RJ-11 telephone line. For more information regarding your computer’s modem, visit Toshiba’s Web site at toshiba.com. Attach one end of a standard RJ-11 telephone cable to the modem port. To locate the modem port, see Plug the other end of the RJ-11 telephone cable into the modular jack of a standard voice-grade telephone line.
Page 83: Powering Down The Computer
the telephone number for the dial-up connection. To set up the network connection, use the Dial-Up Networking Wizard: Click Start and point to All Programs. Point to Accessories, then to Communications. Click Network Setup Wizard or Network Connections. Enter the phone number of your network connection and let the program dial the number.
Page 84: Restart Command
Learning the Basics Powering down the computer the Turn Off command. The Windows operating system uses the Turn Off command if you are not connected to a Windows Professional operating system uses the Shut down command if you are a member of a domain. Factors to consider when choosing Turn Off or Shut down: ❖...
Page 85: Standby Command
❖ Because the state of the system is held on the hard disk, no data is lost if the battery discharges. ❖ Restarting from Hibernation mode uses less time and battery power than restarting from Turn Off. ❖ Restarting from Hibernation mode uses a little more time and battery power than restarting from Standby because information is being retrieved from the hard disk instead of memory.
Page 86: Using Turn Off Or Shut Down
Learning the Basics Using Turn Off or Shut down ❖ When starting up again, the computer returns to the mode in which you left it, including all open programs and files you were using. NOTE: If you power down using Standby and the battery discharges fully, your information will be lost.
Page 87: Turning Off More Quickly
You can also turn off the computer by pressing the power button or closing the display panel. To use either of these methods, you first need to turn on the feature in the Toshiba Power Management Utility. Click Start, Control Panel, then Performance and Maintenance.
Page 88: Starting Again After Turn Off
Learning the Basics Using Hibernation Double-click the Toshiba Power Management icon. The Power Options Properties dialog box appears. Click the Advanced tab, and select the options you want. ❖ When I close the lid of my portable computer Set this option to Power Off to have the computer shut down when you close the display panel.
Page 89 not a member of a domain, power off the computer using the Hibernation command as follows: Click Start, Turn off computer. The Turn off computer window appears. Sample Turn off computer window with shift key held down to show Hibernate option Hold down the shift key and click Hibernate (“Hibernate”...
Page 90: Going Into Hibernation Mode More Quickly
Click Start, Control Panel, then Performance and Maintenance. Double-click the Toshiba Power Management icon. Click the Advanced tab, and select the options you want. ❖ When I press the power button...
Page 91: Starting Again From Hibernation Mode
Click Apply. Click OK, then close the Control Panel. Starting again from Hibernation mode To start the computer from Hibernation mode, press and release the power button. The computer returns to the screen you were using. If you put the computer in Hibernation mode by closing the display panel, you can start it again by opening the display panel.
Page 92: Going Into Standby Mode More Quickly
Learning the Basics Using Standby The computer saves the state of all open programs and files to memory, turns off the display, and goes into a low-power mode. The on/off light ( machine is in Standby mode. If you are using the Windows are a member of a domain, power off the computer using the Standby command as follows: Click Start, then Shut down.
Page 93: Starting Again From Standby
Toshiba’s online resources Toshiba maintains a number of online sites to which you can connect. These sites provide information about Toshiba products, give help with technical questions, and keep you up to date with future upgrades.
Page 94: Chapter 4: Mobile Computing
Many of these energy-saving features have been set by Toshiba. We recommend you leave these features active, allowing your computer to operate at its maximum energy efficiency, so that you can use it for longer periods while...
Page 95: Running The Computer On Battery Power
NOTE: For optimum DVD performance, Toshiba recommends that you play DVDs while running on AC power rather than on battery power.
Page 96: Power Management
Users who are not completely familiar with the power management component of the system should use the preset configuration. For assistance with setup changes, contact Toshiba’s InTouch Center. Charging the battery NOTE: Battery charge time may vary depending on the applications, power management settings, and features used.
Page 97: Charging The Rtc Battery
To ensure that the battery charges to its full capacity, wait until it reaches room temperature (50 to 80 degrees Fahrenheit, 10 to 26 degrees Celsius). ❖ The battery is almost completely discharged. Leave the power connected, and the battery should begin charging after a few minutes.
Page 98: Monitoring Battery Power
Click Start, Control Panel, then Performance and Maintenance. Double-click the Toshiba Power Management icon. The current power source and battery power remaining section displays the current charge state of the battery. The value displays as a percentage of remaining battery...
Page 99: Conserving Battery Power
Click the Battery Power Meter tab. Sample Toshiba Power Management Battery Power Meter tab TECHNICAL NOTE: The computer drains the battery faster at low temperatures. Check your remaining charge frequently if you are working in temperatures below 50 degrees Fahrenheit.
Page 100: What To Do When The Battery Runs Low
Toshiba’s power-saving options greatly increase the length of time you can use the computer before it becomes necessary to recharge the battery. Toshiba has combined these options into preset power usage modes. What to do when the battery runs low When the battery runs low you can ❖...
Page 101: Setting Battery Alarms
To set an alarm: Click Start, Control Panel, then Performance and Maintenance. Double-click the Toshiba Power Management icon. Click the Alarm tab and set the alarm, as desired. Sample Toshiba Power Management Alarm tab Mobile Computing...
Page 102: Changing The Main Battery
Mobile Computing Changing the main battery Changing the main battery When your battery power is running low, you have two options—connect the computer to an AC power source or install a charged battery. CAUTION: When handling a battery, be careful not to drop it or short-circuit its terminals.
Page 103: Taking Care Of Your Battery
While still holding the release latch in the open position lift the battery pack out of the computer. Removing the battery WARNING: If the battery is leaking or its case is cracked, put on protective gloves to handle it, and discard it immediately following the advice in Taking care of your battery The following sections offer tips on how to take care of your...
Page 104: Maximizing Battery Life
If it does not turn on, go to step 4. Operate the computer on battery power for five minutes. If the battery pack has at least five minutes of operating time, continue operating until the battery pack is fully discharged. If the main battery light toshiba.com...
Page 105: Disposing Of Used Batteries Safely
flashes or there is some other warning to indicate a low battery, go to step 4. Connect the AC adapter to the computer and the power cord to a power outlet. The DC-IN or AC power light should glow green, and the main battery light should glow amber to indicate that the battery pack is being charged.
Page 106: Traveling Tips
❖ Always travel with the computer in a carrying case. Toshiba offers a choice of carrying cases for the computer. They all provide plenty of extra space for manuals, power cables, and compact discs. Contact your authorized Toshiba representative for more information.
Page 107: Chapter 5: Getting To Know The Windows
Chapter 5 Getting to Know the Windows System This chapter introduces the Windows by guiding you through a few basic tasks. If you have used a Windows will find the Windows Whether you have used a Windows the skill and confidence you will gain from this chapter will more than offset the short amount of time spent going through these lessons.
Page 108: Lesson 1: Exploring The Desktop
Getting to Know the Windows ® XP Operating System Lesson 1: Exploring the desktop Lesson 1: Exploring the desktop The desktop is the launching pad for everything you can do in the Windows start programs, find documents, set up system components, and perform most other computing tasks.
Page 109 The icons initially displayed on your system desktop include: Toshiba Access—Opens a window with links to software updates, services and support, and other important benefits. Recycle Bin—Holds files you have deleted using the Windows Explorer.
Page 110: Windows ® Xp File System
Getting to Know the Windows ® XP Operating System Lesson 1: Exploring the desktop ❖ Search for files ❖ Access Windows Help and Support Center ❖ Run programs ❖ Suspend system activity and shut down the computer For more information on starting programs, see Starting programs”...
Page 111: Lesson 2: Using The Touchpad And Control Buttons Together
Getting to Know the Windows ® XP Operating System Lesson 2: Using the TouchPad and control buttons together the files and folders reside in your computer on a storage device, such as a disk drive. You can think of your computer storage system in terms of office equipment.
Page 112 Getting to Know the Windows ® XP Operating System Lesson 2: Using the TouchPad and control buttons together With the pointer in an empty area of the desktop, click the secondary button (the right-hand button) to open the desktop shortcut menu. As the name implies, shortcut menus provide quick access to many operating system features.
Page 113 Getting to Know the Windows ® XP Operating System Lesson 2: Using the TouchPad and control buttons together NOTE: If the taskbar is locked, you need to unlock it. To unlock the taskbar, place the cursor on the taskbar and click the secondary button.
Page 114: Lesson 3: Learning About The Internet
Getting to Know the Windows ® XP Operating System Lesson 3: Learning about the Internet Lesson 3: Learning about the Internet This lesson demonstrates how to access a Web page from a window and from the taskbar. The lesson assumes you have an account with an Internet Service Provider (ISP).
Page 115: Lesson 4: Creating A New Document
Getting to Know the Windows ® XP Operating System Lesson 4: Creating a new document This lesson teaches you how to create a text file without having to first open a program. Move the pointer to an empty area of the desktop, then click the secondary button.
Page 116: Lesson 5: Creating A New Folder
Getting to Know the Windows ® XP Operating System Lesson 5: Creating a new folder Notice that when the document opens, there is a new button on the taskbar that reads My New Doc- Notepad (the name may be too long to fit into the taskbar space but, if you point to the name, the complete name is visible).
Page 117: Lesson 6: Starting Programs
Getting to Know the Windows ® XP Operating System The operating system displays the document as an icon on the desktop. Click the document icon and drag it toward your New Folder icon. Position the document icon over the New Folder icon until it changes color, then release the primary button.
Page 118 Getting to Know the Windows ® XP Operating System Lesson 6: Starting programs Sample Paint window To launch Windows Click Start, then point to All Programs. Click Windows Explorer. The operating system opens Windows provides access to all your computer’s resources. For example, it lets you see all the files in a particular folder on the computer’s hard disk.
Page 119: Lesson 7: Resizing, Repositioning, And Hiding Windows
Getting to Know the Windows ® XP Operating System Lesson 7: Resizing, repositioning, and hiding windows Sample Windows Explorer window Notice the taskbar now has two buttons on it—one for Paint and one for Windows To redisplay the Paint program, click the Paint button on the taskbar.
Page 120: Using The Taskbar
Getting to Know the Windows ® XP Operating System Lesson 7: Resizing, repositioning, and hiding windows This lesson introduces several ways to adjust the size, shape, and position of windows open on the desktop. Using the taskbar If you have applications open on the desktop, you can rearrange them by pointing to the taskbar using the TouchPad and clicking the secondary button.
Page 121: Resizing And Moving Windows
Getting to Know the Windows ® XP Operating System Lesson 7: Resizing, repositioning, and hiding windows Click the Maximize button in the top-right corner of the Paint window. The Paint window expands to fill the screen, hiding everything except the taskbar. Notice that the Maximize button has changed.
Page 122: Lesson 8: Closing Programs
Getting to Know the Windows ® XP Operating System Lesson 8: Closing programs Repeat steps Windows Explorer, placing it on the right side of the desktop. Now that the windows are side by side, you can see how you could refer to one window while working in the other.
Page 123: Lesson 9: Creating Shortcuts
Getting to Know the Windows ® XP Operating System This lesson teaches you how to close the programs you opened earlier in this tutorial. To close the programs: Click the Close button at the top-right of the Explorer window. Windows from the taskbar as well.
Page 124: Creating A Shortcut To The Character Map
Getting to Know the Windows ® XP Operating System Lesson 9: Creating shortcuts Sample Create Shortcut dialog box In the Command line box, type and click Next. The operating system prompts you to select a name for the shortcut. Type Calculator The operating system displays the new shortcut on your desktop.
Page 125 Getting to Know the Windows ® XP Operating System Sample Search options on the Start menu Click All Files and Folders. The operating system displays the Search Results dialog box. Sample Search Results dialog box Lesson 9: Creating shortcuts...
Page 126: Lesson 10: Changing The Screen Saver
Getting to Know the Windows ® XP Operating System Lesson 10: Changing the screen saver HINT: Search also allows you to perform searches on the Internet. Type char and then click Search. The operating system displays a list of all the files with “char”...
Page 127 Getting to Know the Windows ® XP Operating System Lesson 10: Changing the screen saver of these properties can be customized to meet your particular needs and tastes. DEFINITION: An object is an independent block of data, text, or graphics that was created by an individual application. This lesson introduces object properties by showing you how to change one of the properties of the desktop—the screen saver.
Page 128: Lesson 11: Setting The Date And Time
Getting to Know the Windows ® XP Operating System Lesson 11: Setting the date and time Scroll through the screen saver options by clicking the scroll arrows in the list box. Try a screen saver pattern by clicking a name in the list box.
Page 129 Getting to Know the Windows ® XP Operating System Lesson 11: Setting the date and time Sample Date and Time Properties dialog box HINT: To open the Date and Time Properties dialog box more quickly, either click the time display on the taskbar with the secondary button, then click Adjust Date and Time, or double- click the time display.
Page 130: Lesson 12: Removing Objects From The Desktop
Getting to Know the Windows ® XP Operating System Lesson 12: Removing objects from the desktop Lesson 12: Removing objects from the desktop Earlier in this tutorial, you created a new icon on the desktop. Since everything you have done to this point has been just practice, you may want to return the desktop back to its original uncluttered state.
Page 131 Getting to Know the Windows ® XP Operating System Lesson 12: Removing objects from the desktop Sample Recycle Bin open on the desktop To completely remove an object, select it, and then click File, Delete. The object is permanently deleted from the Recycle Bin. Later on—in your real work, not in this tutorial—you will use the Recycle Bin to delete other objects such as folders, documents, and sometimes even programs.
Page 132: Lesson 13: Using System Restore
Getting to Know the Windows ® XP Operating System Lesson 13: Using System Restore To delete everything from the Recycle Bin at once, choose Empty Recycle Bin from the File menu. Click Yes to confirm that you are sure. HINT: Empty the Recycle Bin periodically. Even though an item is moved to the Recycle Bin, it still uses valuable space on the hard disk drive until it is deleted from the Recycle Bin.
Page 133: Lesson 14: If I Am Lost, What Do I Do
Getting to Know the Windows ® XP Operating System The operating system guides you through the process of storing your system settings for future use. It also guides you through restoring your system to the selected date or time. Lesson 14: If I am lost, what do I do? This lesson teaches you how to use some of the Help and Support features in Windows ®...
Page 134 Getting to Know the Windows ® XP Operating System Lesson 14: If I am lost, what do I do? The left side of the screen contains the index. The text box above the index, where the cursor is flashing, lets you type in a topic you want to find in the index.
Page 135: Using The Online Tours And Tutorials
Getting to Know the Windows ® XP Operating System program to look at it while you read about the program in the Help topic. Using the online tours and tutorials Whether you are new to computers or you have some experience, the Windows is a good place to start.
Page 136: Lesson 15: Turning Off Your Computer
Getting to Know the Windows ® XP Operating System Lesson 15: Turning off your computer Lesson 15: Turning off your computer It is very important that you let the Windows system shut down your computer. As it shuts down, the operating system performs a number of tasks that ensure that everything is in place the next time you turn on the computer.
Page 137: Chapter 6: Exploring Your Options
Chapter 6 Exploring Your Options In this chapter, you will explore other features of your notebook computer. ® Windows XP special features The Windows features and enhancements, including: ❖ New system file protection ❖ A system restore function, allowing you to rollback the system to its previous mode ❖...
Page 138: Personalizing Your Desktop
Exploring Your Options Personalizing your desktop Personalizing your desktop Your desktop is your virtual workspace. This section explains how to customize its features for the way you like to work. You can customize the following aspects of the desktop: ❖ Taskbar—which resources to display for quick access ❖...
Page 139: Bringing The World To Your Desktop
Bringing the world to your desktop With the Windows desktop with complete World Wide Web integration at a single click. Turning on the Web content interface The first step to bring active content to your desktop is to turn on the Web content interface: Point to an empty space on the desktop and click the secondary button.
Page 140: Changing Desktop And Browsing Style
Exploring Your Options Personalizing your desktop To browse the Gallery for more components to add, click Visit Gallery. In order to browse, an active Internet connection must be established. To select some other Web site, type the address of the Web site you want or click Browse to locate it.
Page 141: Personalizing Individual Windows
The My Computer window appears. Select the Tools menu, then click Folder Options. The Folder Options dialog box appears. Sample Folder Options dialog box Click the preferred options. Click Apply, then OK. Personalizing individual windows Just as you can display a Web page on your desktop, you can also display a Web page in an individual window.
Page 142: Customizing Window Toolbars
Exploring Your Options Personalizing your desktop Customizing window toolbars You can display one or more customizable toolbars at the top of a window. As you browse, the operating system detects the kind of information presented in the window and automatically displays the appropriate toolbar buttons and menus.
Page 143: Displaying Information About Each Folder
The elements you can add to the top of the window are: Toolbar element Address Bar Standard buttons Displays buttons for commonly used Displaying a toolbar in a window Click Start, then click My Computer. The My Computer window appears. On the View menu, point to Toolbars, then click the name of the toolbar you want to display.
Page 144: Using Your Computer At The Office
Exploring Your Options Using your computer at the office Open the folder you want to view as a Web page. In the Tools menu, select Folder Options. In the Tasks section, click the button for Show common tasks in folders. Click Apply, then OK.
Page 145: Setting Up For Communications
Setting up for communications To connect to the Internet, use an online service, or communicate across the telephone lines with another computer, you need: ❖ A modem (one comes with your computer) ❖ A telephone line ❖ A browser or communications program ❖...
Page 146: Connecting The Modem To A Telephone Line
Exploring Your Options Using your computer at the office To verify that the modem is set up properly, double-click the COM port to which your modem is connected. The Modem AMR Properties box appears. In the device status area, the computer should indicate whether the modem is working properly.
Page 147: Exchanging Data With Another Computer
Exchanging data with another computer To transfer a large amount of information between computers, you need a physical connection and a synchronization program. You can use the Windows synchronization program that transfers data using a cable connected to the computers’ parallel ports. Transferring files using a parallel port connection To transfer files using the computers’...
Page 148: Connecting To The Internet
Exploring Your Options Connecting to the Internet Connecting to the Internet To connect to the Internet you may need: ❖ A modem (one comes with your computer) ❖ A telephone line, DSL, a cable connection, or a satellite link ❖ A browser or communications program ❖...
Page 149: An Overview Of Using The Internet
An overview of using the Internet The following sections give a quick introduction to the Internet and some of its exciting features, under these headings: ❖ The Internet ❖ The World Wide Web ❖ Signing up with an Internet Service Provider ❖...
Page 150: Internet Service Providers
Exploring Your Options An overview of using the Internet Internet Service Providers To connect a computer directly to the Internet, many people and businesses use an Internet Service Provider (ISP). An ISP is a company that has the equipment and the telecommunication lines necessary to maintain an Internet connection.
Page 151: Internet Features
Internet features The Internet offers many types of communication tools to help you perform many tasks. ❖ Internet email To send and receive email of your own, you need a mailbox on the Web, or an email address. If you have an account with an ISP, you can probably set up an email address at the same time as you sign up for the service.
Page 152: Exploring Video Features
Exploring Your Options Exploring video features large amounts of data. You can also use the File Transfer Protocol (FTP) supported by a separate software program. Exploring video features Your computer’s video features provide the viewing of presentations or DVD movies on the computer screen. TECHNICAL NOTE: Video CD playback capability is not enabled on all systems.
Page 153: Display Settings Hot Key
Sample Display Properties dialog box Click the Settings tab. Slide the Screen area slider bar toward Less until the setting reads 800 x 600, then click Apply. The screen blinks momentarily while the settings are adjusted. The Monitor Settings window appears and asks if you want to keep the settings.
Page 154: Exploring Audio Features
Exploring Your Options Exploring audio features Exploring audio features You can use your computer to record sounds using an external microphone. You can play .wav sound files or audio CDs using the built-in speakers, headphones or external speakers. Recording sounds You can make audio recordings and save them as .wav files by connecting an external microphone or other sound source to the microphone jack and using the Sound Recorder feature...
Page 155: Adjusting Recording Settings
Positioning Sample Sound Recorder screen Click the Record button and speak normally into the microphone. NOTE: You can only record 60 seconds at a time. When you have finished recording, click the Stop button. To hear what you just recorded, click the Play button. To save the file, select Save from the File menu.
Page 156: Using External Speakers Or Headphones
Exploring Your Options Connecting a monitor, keyboard and mouse Click OK. Your new settings take effect the next time you record. Using external speakers or headphones Your computer is equipped with a full stereo sound system with internal speakers. Instead of using the internal speakers, you can connect headphones or a pair of external stereo speakers.
Page 157: Using Pc Cards
Using PC Cards PC Cards expand your computer’s capabilities and usefulness. You can purchase additional PC Cards from your dealer. Most PC Cards conform to the PCMCIA (Personal Computer Memory Card International Association) standard. Your computer has two stacked PC Card slots and supports three types of PC Cards: ❖...
Page 158: Removing Pc Cards
Exploring Your Options Using PC Cards To insert a PC Card: Turn off the computer. You may also hot swap a PC Card. Stop the PC Card by clicking the Safely Remove Hardware icon on the System tray. After the Safe to Remove Hardware message appears, it is safe to remove the PC Card.
Page 159 Hot swapping precautions Although you can insert a PC Card at any time, to avoid data loss never remove a card while it is in use. For example: ❖ Never remove a hard disk card while the system is accessing it. ❖...
Page 160: Chapter 7: Windvd
Chapter 7 WinDVD ™ WinDVD is a software program for playing DVDs. This chapter explains how to use this program. Playing DVDs TECHNICAL NOTE: For optimum DVD performance, play DVDs while your computer is connected to AC power. For systems with a DVD-ROM or multi-function drive, you can use WinDVD to play DVDs.
Page 161 Insert a DVD into the drive. The computer automatically detects the disc in the drive and will prompt you what to do. Sample DVD Drive Window NOTE: If you wish to have WinDVD run automatically, select Play DVD movie using WinDVD, then select the Always do the selected action check box.
Page 162: Using The Windvd Slider Bar (Location)
WinDVD™ Using the WinDVD control panel Sample WinDVD video window with the control panel Using the WinDVD slider bar (location) The slider bar enables you to move forward or backward through the DVD content. Move the slider bar to the left to go backward or move it to the right to go forward.
Page 163: Using The Control Panel Playback Buttons
Stop Play Step forward Playlist Speed Ring Pause Step backward Time Control Clock Time shift Sample WinDVD control panel You can open a shortcut menu by positioning the cursor over the WinDVD window (other than over the control panel), then clicking the secondary button. The shortcut menu contains the same features as the control panel, plus the enable caption feature, which displays captions for the hearing impaired.
Page 164 WinDVD™ Using the WinDVD control panel Sample WinDVD control panel with expanded view for showing advanced features Click this To do this Play — starts disc playback. Step forward — steps forward in the playback one frame at a time. Speed Ring —...
Page 165 Using the WinDVD control panel Click this To do this Pause — pauses disc playback. Resume playback by clicking Play. Step backward — steps backward in the playback one frame at a time. Time Control — click to increase playback speed.
Page 166 WinDVD™ Using the WinDVD control panel Click this To do this Next Chapter — skip to the next chapter in the movie. Title Menu— opens the title menu of the inserted DVD. Eject — ejects the disk. If the disk is still playing, this button stops play before the disk is ejected.
Page 167 Using the WinDVD control panel Click this To do this Bookmarks — opens the Bookmark browser, which enables you to bookmark scenes in a movie so that you can skip to them when selected. Zoom — zooms in on the movie window for a closer look.
Page 168: Maximizing The Video Window
WinDVD™ Using WinDVD advanced features Click this Maximizing the video window To close the WinDVD control panel and expand the video window to fill the screen, click the Maximize button. To display the control panel again, double-click anywhere in the video window. Using WinDVD advanced features TECHNICAL NOTE: The DVD author determines what features the DVD supports.
Page 169: Using Playlists
Sample WinDVD with expanded subpanel Using playlists TECHNICAL NOTE: The DVD author determines what features the DVD supports. Depending on the DVD format and your computer’s hardware configuration, some of the control panel features may be unavailable when playing a DVD. Unsupported features appear gray, and you cannot select them.
Page 170: Creating A Playlist
WinDVD™ Using playlists Creating a Playlist To create a new playlist: Open the playlist menu by clicking the Playlist button. See “Using the WinDVD control panel” on page 162 playlist button. Sample Playlist dialog Select New Playlist from the menu. The Playlist window opens.
Page 171: Playing A Playlist
Highlight the files and click Add, then OK to confirm your selection. After adding all the files you want to include in the new playlist, click Save List. The Save As dialog appears. Browse to the folder where you want to save your playlist, name the playlist, then click Save.
Page 172: Getting Help
WinDVD™ Getting Help The Open window appears. Sample Open Playlist dialog Locate the playlist you wish to open, then click Open. The Playlist window appears. Click Load List to open the saved playlists. Browse to the playlist you want to open then click Open and WinDVD displays the playlist.
Page 173: Chapter 8: If Something Goes Wrong
This chapter aims to help you solve many problems by yourself. It covers the problems you are most likely to encounter. If all else fails, contact Toshiba. You will find information on Toshiba’s support services at the end of this chapter.
Page 174 If Something Goes Wrong Problems that are easy to fix To close a program that has stopped responding: Press Ctrl The Windows Task Manager window appears. Click the Applications tab. If a program has stopped responding, the words “not responding” appear beside its name in the list. Select the program you want to close, then click End Task.
Page 175: Problems When You Turn On The Computer
Press Enter describing what you were doing when you received the message. Save the file and refer to it when you contact the software manufacturer. Problems when you turn on the computer These problems may occur when you turn on the power. The computer will not start.
Page 176: The Windows Operating System Is Not Working
If Something Goes Wrong The Windows® operating system is not working diskette drive, press the left or right arrow key and choose your boot-up device. HINT: Press F12 as you power on the computer to access the menu. The computer displays the message.
Page 177: Using Startup Options To Fix Problems
The Windows® operating system is not working ❖ The screen does not look right. Unless a hardware device has failed, problems usually occur when you change the system in some way such as installing a new program or adding a device. If you experience any of these problems, use the options in the Startup menu to fix the problem.
Page 178: Internet Problems
If Something Goes Wrong The Windows® operating system is not working ❖ Return to OS Choices Menu See your Windows TECHNICAL NOTE: If your computer is connected to a network, the Startup menu may display different versions of Safe mode. Internet problems My Internet connection is very slow.
Page 179: Resolving A Hardware Conflict
The Help and Support Center window appears. Then do one or both of the following: ❖ In the search field, type in the topic of the problem with which you need help and follow the on-screen instructions. ❖ Click a problem you would like help with from the listings and follow the on-screen instructions.
Page 180: Resolving Hardware Conflicts On Your Own
If Something Goes Wrong Resolving a hardware conflict you add each device, test it to make sure it and all previously connected devices work. The device most recently connected to the system is the one most likely to be causing a hardware conflict. Resolving hardware conflicts on your own Computer components need resources to accomplish a task.
Page 181 computer standard that helps the system BIOS (basic input/ output system) and the operating system to automatically assign resources to Plug and Play-compliant devices. In theory, if every device connected to the computer is Plug and Play-compliant, no two devices will compete for the same system resources.
Page 182: Fixing A Problem With Device Manager
If Something Goes Wrong Resolving a hardware conflict Fixing a problem with Device Manager Device Manager provides a way to check and change the configuration of a device. CAUTION: Changing the default settings using Device Manager can cause other conflicts that make one or more devices unusable. Device Manager is a configuration tool for advanced users who understand configuration parameters and the ramifications of changing them.
Page 183: Memory Module Problems
To check a device’s properties: Click Start, Control Panel, Performance and Maintenance, Administrative Tools. Double-click the Computer Management icon. In the left pane, click Device Manager. To view the device(s) installed, double-click the device type. To view the properties, double-click the device. The operating system displays the Device Properties window, which provides an array of tabs.
Page 184: Power And The Batteries
If Something Goes Wrong Resolving a hardware conflict Incorrectly connected or faulty memory modules may cause errors that seem to be device-related. It is worthwhile checking for these first: Turn off your computer according to the instructions in “Turn Off or Shut down command” on page Remove the memory module, following the instructions “Removing a memory module”...
Page 185 If the AC power light still does not come on, check that the wall outlet is working properly by plugging in a lamp or other appliance. The AC adapter and power cable work correctly, but the battery will not charge. The battery does not charge while the computer is consuming full power.
Page 186: Keyboard Problems
If Something Goes Wrong Resolving a hardware conflict For more information on maximizing battery power, see “Charging the battery” on page Keyboard problems If, when you type, strange things happen or nothing happens, the problem may be related to the keyboard itself. The keyboard produces unexpected characters.
Page 187 The following display options may be available on your system: ❖ built-in display panel only ❖ built-in display panel and external monitor simultaneously ❖ external monitor only ❖ external video device only (composite port) To open the display options window, press simultaneously.
Page 188: Disk Drive Problems
If Something Goes Wrong Resolving a hardware conflict The built-in screen flickers. Some flickering is a normal result of the way the screen produces colors. To reduce the amount of flickering, try using fewer colors. To change the number of colors displayed: Point at the desktop and click with the secondary button.
Page 189 Typical disk problems are: You are having trouble accessing a disk, or one or more files appear to be missing. Make sure you are identifying the drive by its correct name (A: or C:). Error-checking Run Error-checking, which analyzes the directories, files and file system on the disk and repairs any damage it finds: To run Error-checking: Click Start, then click My Computer.
Page 190 If Something Goes Wrong Resolving a hardware conflict Your data files are damaged or corrupted. Refer to your software documentation for file recovery procedures. Many software packages automatically create backup files. You may also be able to recover lost data using utility software, which is available from your dealer.
Page 191: Dvd-Rom Or Multi-Function Drive Problems
DVD-ROM or multi-function drive problems You cannot access a disc in the drive. Make sure the drive tray has closed properly. Press gently until it clicks into place. Open the drive tray and remove the disc. Make sure the drive tray is clean.
Page 192 If Something Goes Wrong Resolving a hardware conflict The color of the materials used to make the disc can affect its reliability. Silver-colored CD-ROMs are the most reliable, followed by gold-colored CD-ROM. Green-colored CD- ROMs are the least reliable. WinDVD problems: general issues WinDVD has been configured to provide optimum performance and quality based upon your system’s available resources.
Page 193 Also, if you change your operating system, check with Toshiba (See “If you need further assistance” on page your graphics card vendor to ensure that you have the appropriate drivers for both your hardware. For example, the graphics card and software drivers must support the operating system and DVD with WinDVD.
Page 194 If Something Goes Wrong Resolving a hardware conflict Click the Device Manager button. Click + to open the IDE ATA/ATAPI Controllers. Double-click the Secondary IDE Channel. The Secondary IDE Channel Properties window appears. Sample Secondary IDE Channel Properties window Click the Advanced Settings tab. Look at Device 0.
Page 195 become jerky or show pauses. The normal version of the movie will not show this problem. WinDVD will not function properly with “debug” software installed. The WinDVD application will not function properly if it detects that debug software is present on the system. Remove the debug software to restore functionality of WinDVD.
Page 196 If Something Goes Wrong Resolving a hardware conflict Error message and additional information No audio subsystem could be found for playback. There is a problem with the audio card or audio compo- nent within the system. The problem may be one of the following: The audio card is faulty.
Page 197 Error message and additional information An unexpected error has occurred. This error is unclassified. Report the problem and any error code to your supplier's Technical Support. There is a problem with the copy protection system within the DVD-ROM or multi-function drive. Play- back cannot continue.
Page 198 If Something Goes Wrong Resolving a hardware conflict Error message and additional information This DVD disc cannot be played in this region. The selected region cannot be used due to one of the following: The Region Code of WinDVD and the DVD disc do not match.
Page 199: Sound System Problems
Error message and additional information This file appears to contain unsupported data. The drive or disc cannot be found. This may be caused by one of the following: No disc in the DVD-ROM or multi-function drive. No DVD-ROM or multi- function drive.
Page 200: Pc Card Problems
If Something Goes Wrong Resolving a hardware conflict in the Mixer Utility (default Enabled), may cause feedback. Revert to the default settings. PC Card problems PC Cards (PCMCIA-compatible) include many types of devices, such as a removable hard disk, additional memory, or a pager.
Page 201 PC Card checklist ❖ Make sure the card is inserted properly into the slot. “Using PC Cards” on page 157 Cards. ❖ Make sure all cables are securely connected. ❖ Occasionally a defective PC Card slips through quality control. If another PCMCIA-equipped computer is available, try the card in that machine.
Page 202 If Something Goes Wrong Resolving a hardware conflict The computer stops working (hangs) when you insert a PC Card. Remove the PC Card. If removing the PC Card does not resolve the problem, try restarting the computer. If the computer still does not work, contact the PC Card’s manufacturer.
Page 203: Printer Problems
Printer problems This section lists some of the most common printer problems: The printer will not print. Check that the printer is connected to a working power outlet, turned on and ready (on line). Check that the printer has plenty of paper. Some printers will not start printing when there are just two or three sheets of paper left in the tray.
Page 204: Modem Problems
You can never predict when your computer will lock, forcing you to close a program and lose unsaved changes. Many software programs build in an automatic backup, but you should not rely solely on this feature. Save your work! See “Computing tips” on page 67 145. toshiba.com for instructions.
Page 205: If You Need Further Assistance
On a regular basis, back up the information stored on your hard disk. Here are some ways you can do this: ❖ Copy files to diskette, following the steps in your work” on page ❖ Copy files to your network partition. ❖...
Page 206: Before You Call
For the number of a Toshiba dealer, see contact” on page Contacting Toshiba If you still need help and suspect that the problem is hardware-related, Toshiba offers a variety of resources to help you. Start with accessing Toshiba on the Internet using any Internet browser by typing 207.
Page 207: Other Toshiba Internet Web Sites
Information about what you were doing when the problem occurred. ❖ Exact error messages and when they occurred. For technical support, call the Toshiba InTouch Center: ❖ Within the United States at (800) 457-7777 ❖ Outside the United States at (949) 859-4273 Other Toshiba Internet Web sites toshiba.com...
Page 208: Toshiba's Worldwide Offices
If Something Goes Wrong Toshiba’s worldwide offices Toshiba’s worldwide offices Australia Toshiba (Australia) Pty. Limited 84-92 Talavera Road North Ryde NSW 2113 Sydney Australia Belgium Toshiba Information Systems Benelux (Belgium) B.V. Excelsiorlaan 40 B-1930 Zaventem Belgium Czech Republic CHG Toshiba, s.r.o.
Page 209 800-457-7777 (within the US) 949-859-4273 (outside of the US - this call may incur long distance charges) Mexico Toshiba de México S.A. de C.V. Sierra Candela No.111, 6to. Piso Col. Lomas de Chapultepec. CP 11000 Mexico, DF. Tel: 5249 6500...
Page 210 If Something Goes Wrong Toshiba’s worldwide offices Spain Toshiba Information Systems (España) S.A. Parque Empresarial San Fernando Edificio Europa, 1a Planta Escalera A 28831 (Madrid) San Fernando de Henares Spain Switzerland Ozalid AG Herostrasse 7 8048 Zürich Switzerland United States Toshiba America Information Systems, Inc.
Page 211: Appendix A: Hot Keys
Appendix A Hot Keys Hot keys are keys that, when pressed in combination with the key, turn system functions on and off. Hot keys have a legend on or above the key indicating the option or feature the key controls. Volume Mute This hot key enables/disables volume mute on your computer.
Page 212: With A Password
Hot Keys Instant password security make the display’s content reappear, if no password is set for the current user. With a password key combination turns off the display and activates Fn + F1 instant security. If you set a blank screen saver, pressing the combination to activate instant security will cause the screen to go blank.
Page 213: Power Usage Mode
Presentation and Super Long Life Sample power usage modes The power usage mode in the Windows system under AC power is Full Power only. The properties of each mode are set in the Toshiba Power Management utility. Power usage mode password screen saver.
Page 214: Standby Mode
Hot Keys Standby mode Standby mode This hot key puts the computer into Standby mode. Sample Standby confirmation box ❖ A message box is displayed by default to confirm that the computer is going into Standby mode. This message box can be set so it does not display.
Page 215: Hibernation Mode
Hibernation mode This hot key puts the computer into Hibernation mode. Sample Hibernation confirmation box Hibernation mode ❖ If Hibernation mode is enabled (the default) a message box is displayed by default to confirm the computer is going into Hibernation mode. The message box can be set so it does not display.
Page 216: Display Modes
Hot Keys Display modes Display modes This hot key cycles through the power-on display options. The display modes are: Sample display options window In order to use a simultaneous mode, you must set the resolution of the internal display panel to match the resolution of the external display device.
Page 217: Enabling A Wireless Device
Enabling a wireless device This hot key enables/disables the optional wireless device in your computer (for systems with Wi-Fi Disabling or enabling the TouchPad This hot key enables/disables the TouchPad. To use the TouchPad, see the TouchPad” on page Sample disable and enable TouchPad windows Keyboard hot keys and off.
Page 218: Appendix B: Power Cable Connectors
Appendix B Power Cable Connectors Your notebook computer features a universal power supply you can use worldwide. This appendix shows the shapes of the typical AC power cable connectors for various parts of the world. USA and Canada UL approved CSA approved Australia AS approved...
Page 219: Glossary
Glossary TECHNICAL NOTE: Some features defined in this glossary may not be available on your computer. Acronyms The following acronyms may appear in this user’s guide. BIOS CD-ROM CD-RW CMOS COM1 COM2 alternating current basic input/output system bits per second compact disc compact disc read-only memory compact disc rewrite memory...
Page 220 Glossary DIMM DSTN DVD-ROM digital versatile (or video) disc read-only memory EPROM HTML IEEE LPT1 MIDI NTFS direct memory access dual inline memory module disk operating system dots per inch dual supertwist nematic digital versatile (or video) disc enhanced capabilities port erasable programmable read-only memory file allocation table Federal Communications Commission...
Page 221 PCMCIA SCSI SDRAM SRAM SVGA Terms The following terms may appear in this user’s guide. active-matrix display — A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology. Also known as a “TFT display,” in its simplest form there is one thin film transistor (TFT) for each cell.
Page 222 Glossary alternating current (AC) — The type of power usually supplied to residential and commercial wall outlets. AC reverses its direction at regular intervals. Compare direct current (DC). application — A computer program that you use to perform tasks of a specific type. Applications include word processors, spreadsheets, and database management systems.
Page 223 bus — An electrical circuit that connects the central processing unit (CPU) with other parts of the computer, such as the video adapter, disk drives, and ports. It is the pathway through which data flows from one device to another. See also bus speed, frontside bus.
Page 224 Glossary color palette — A set of specified colors that establishes the colors that can be displayed on the screen at a particular time. compatibility — The extent to which computers, programs, or devices can work together harmoniously, using the same commands, formats, or language as another.
Page 225 direct memory access (DMA) — A dedicated channel, bypassing the CPU, that enables direct data transfer between memory and a device. directory — See folder. disable — To turn a computer option off. See also enable. disc — A round, flat piece of metal, designed to be read from and written to by optical (laser) technology, and used in the production of optical discs, such as CDs and DVDs.
Page 226 Glossary driver — See device driver. DVD — An individual digital versatile (or video) disc. See also DVD-ROM. DVD-ROM (digital versatile [or video] disc read-only memory) — A very high-capacity storage medium that uses laser optics for reading data. Each DVD-ROM can hold as much data as several CD-ROMs.
Page 227 — The physical components of a computer system. Compare software. Hibernate — A feature of many Toshiba notebook computers that saves to the hard disk the current state of your work, including all open files and programs, when you turn the computer off. When you turn on the computer again, your work is returned to the same state it was when the computer was turned off.
Page 228 Glossary hot key — (1) A feature in which certain keys in combination with key can set system options or control system parameters, such as the battery save mode. (2) A key or combination of keys that activates a memory resident program. hot swapping —...
Page 229 liquid crystal display (LCD) — A type of display that uses a liquid substance between two transparent electrode panels. When an electric current passes through the electrodes, the molecules in the liquid form a crystalline pattern that polarizes the light passing through it.
Page 230 Glossary multimedia — A combination of two or more media, such as sound, animation, and video in a computer program or presentation. Musical Instrument Digital Interface — See MIDI. network — A collection of computers and associated devices that are connected by communications facilities. A network allows you to share data and peripheral devices, such as printers, with other users and to exchange electronic mail.
Page 231 PC Card — A credit-card-sized expansion card designed to increase the capabilities of notebook computers. PC Cards provide functions such as modem, fax/modem, hard disk drive, network adapter, sound card, or SCSI adapter. peripheral — Any device, such as a printer or joystick, that is attached to the computer and controlled by the computer’s CPU.
Page 232 Glossary removable disk — A disk that can be removed from a disk drive. A diskette is one example of a removable disk. resolution — A measure of the sharpness of the images that can be produced by a printer or displayed on a screen. For a printer, resolution is expressed in dots per inch (dpi).
Page 233 Standby — A feature of some Windows allows you to turn off the computer without exiting your open applications and to continue from where you left off when you turn the computer on again. Suspend — A feature of some Windows allows you to turn off the computer without exiting your open applications and to continue from where you left off when you turn the computer on again.
Page 234 Glossary World Wide Web (www) — The worldwide network of Web sites linked together over the Internet. A user of the Web can jump from site to site regardless of the location of the computer hosting the site. See also Internet.
Page 235: Index
Index AC adapter 47, 51 AC power light Accessories programs approved countries for use audio features avoiding injury battery caring for changing charge not lasting 64, 96 charging conserving power disposal installing 37, 51, 98 light monitoring power power usage mode removing RTC (real-time clock) battery cover...
Page 236 Index Character Map charging main battery RTC (real-time clock) battery checking device properties cleaning CD or DVDs computer click closing programs comfort chair lighting work habits command Shut down Turn Off commands Hibernate powering down Standby communications programs setting up system resources via modem compact discs...
Page 237 shortcut menu Start button system tray 110, 120 taskbar Device Manager checking properties 182, 183 disabling a device dial-up connection Dial-Up Networking Wizard Digital Subscriber Lines (DSL) disk activity light Disk Defragmenter disk drive corrupted/damaged data files missing files/trouble accessing a disk running slow diskette drive...
Page 238 Index external speakers FAT (File Allocation Table) files 68, 74 backing up copying to diskette printing 67, 72 saving transferring Fn key folders displaying information front panel 35, 69 function keys hard disk drive 37, 51 light hardware conflicts resolving headphone jack Help Windows XP...
Page 239 function keys hot keys indicator panel 175, 186 not working numeric keypad overlay overlay keys unexpected characters Windows special keys lights 47, 51 AC power 37, 51, 98 battery caps lock cursor control mode disk activity DVD-ROM/multifunction drive 37, 51 hard disk drive numeric mode on/off...
Page 240 PC Card inserted computer will not power up contacting Toshiba corrupted/damaged data files Device Manager 182, 183 disabling a device disk drive is slow display is blank...
Page 241 faulty memory 179, 180 hardware conflict hardware conflict caused by legacy device high-pitched noise illegal operation Internet bookmarked site not found Internet connection is slow keyboard not responding keyboard produces unexpected characters missing files/trouble accessing a disk modem not receiving or transmitting multi-function performance is poor...
Page 242 110, 120 taskbar customizing telephone line connecting the modem text file toolbars displaying in a window Toshiba Internet Web sites Toshiba Accessories information TouchPad using using with control buttons transferring files transferring information between computers traveling tips Turn Off restarting from...
Page 243 PC Cards Standby video features exploring warranty SelectServ Web address Web browsers Web content interface Web sites Support Online Web sites,Toshiba windows hiding repositioning 119, 121 resizing Windows Explorer Windows Help Windows Media Player Windows Standby Windows XP WinDVD...
Page 244 Index video window, maximizing wireless antenna indicator on-off switch wireless mode hot key Wizards Add Printer World Wide Web...

This manual is also suitable for:

1130-s155 1130-s156 1135-s125 1135-s155 1135-s1552 1135-s1553 ... Show all

Toshiba Satellite 1130 Series User Manual

Chapter 1: Finding Your Way Around

Chapter 2: Getting Started

Chapter 3: Learning the Basics

Chapter 4: Mobile Computing

Chapter 5: Getting to Know the Windows

Chapter 6: Exploring Your Options

Chapter 7: Windvd

Chapter 8: If Something Goes Wrong

Appendix A: Hot Keys

Appendix B: Power Cable Connectors

Quick Links

Related Manuals for Toshiba Satellite 1130 Series

Summary of Contents for Toshiba Satellite 1130 Series