Download Print this page

D-Link DAP-1365 Technical Support Setup Procedure

Hide thumbs Also See for DAP-1365:

Download this manual

Technical Support Setup Procedure

How to configure DAP-1365 as Repeater?

(Note: Please ensure the device LED is blinking orange colour before you do setup.

If it is not blinking in orange colour, follow the guide on page 4 on how to reset the device

before follow the guide to setup.)

Step 1: Copy down the wireless name and password that was on the sticker of the device.

Step 2: Plug DAP-1365 direct to power outlet.

Step 3: Click on the Computer Icon on the right bottom side of the Windows. Select the

Wireless network name that was copy down.

STEP 4: Select the Wireless network name that was copy down.

Step 5: Enter the Wifi Password which had copy down earlier on. Click on OK.

Step 6: Open Internet Explorer and enter http://192.168.0.50 on the URL bar.

Page | 1

Page 1 Step 1: Copy down the wireless name and password that was on the sticker of the device. Step 2: Plug DAP-1365 direct to power outlet. Step 3: Click on the Computer Icon on the right bottom side of the Windows. Select the Wireless network name that was copy down.
Page 2 Technical Support Setup Procedure Step 6: Click on X. Step 7: Click on OK. Step 8: Click on Settings and select Extender. Step 9: Select Wi-Fi for Existing Network. Click on Scan. Page | 2...
Page 3 Technical Support Setup Procedure Step 10: Select the Wi-Fi Network which you want to repeat. Click on Select Step 11: Key in the Wi-Fi Password for the Wi-Fi name you select. Click on Connect. Step 12 a) You can change the default SSID to a desired SSID in the field for 2.4Ghz. b) Please key in 8-Digit characters password in the Password field for 2.4Ghz.
Page 4 How to reset DAP-1365. Step 1: Plug DAP-1365 direct to power outlet. Step 2: Power on DAP-1365 and wait for 1 min. Step 3: Use a paper clip to press and hold the Reset Button for 30 second. Step 4: Wait for 2 min for the device to fully power on after reset.