hit counter script
Dell Inspiron 5584 Service Manual
  1. Manuals
  2. Brands
  3. Dell Manuals
  4. Laptop
  5. Inspiron 5584
  6. Service manual

Dell Inspiron 5584 Service Manual

Hide thumbs Also See for Inspiron 5584:
Table of Contents

Advertisement

Quick Links

Download this manual
Inspiron 5584
Service Manual
Regulatory Model: P85F
Regulatory Type: P85F001
October 2020
Rev. A02

Advertisement

Table of Contents
loading

Related Manuals for Dell Inspiron 5584

Summary of Contents for Dell Inspiron 5584

  • Page 1 Inspiron 5584 Service Manual Regulatory Model: P85F Regulatory Type: P85F001 October 2020 Rev. A02...
  • Page 2 © 2018 - 2019 Dell Inc. ឬក្ រ ុ ម ហ៊ ុ ន បុ ត ្ រ សម្ ព ័ ន ្ ធ របស់ ខ ្ ល ួ ន ។ រក្ សា សិ ទ ្ ធ គ្ រ ប់ ដ បបយ៉ា...

  • Page 3: Table Of Contents

    Contents Chapter 1: មុ ន នឹ ង ធ្ ល ែ ី កា រលៅខាងក្ ន ុ ង កុ ំ ព ្ យ ូ ទ ័ រ របស់ អ ្ ន ក...................... 9 មុ ន លពលអ្ ន កចាប់ ផ ្ ល តម.....................................9 Chapter 2: ក្...
  • Page 4 Prerequisites..................................30 Procedure....................................30 Chapter 13: ការប្ ែ ូ រ កាតឥតខ្ ដ ស........................32 Procedure....................................32 Post-requisites................................... 33 Chapter 14: ការលដាះកង្ ហា រ........................34 Procedure....................................34 Chapter 15: ការប្ ែ ូ រ កង្ ហា រ........................35 Procedure ...................................35 Chapter 16: ការលដាះែ្ រា យស្ ថា នភាពរឹ ង /មា ូ ឌ ុ ល អង្ គ ចងចាំ Intel Optane................36 Procedure....................................36 Chapter 17: ការដាក់...
  • Page 5 Chapter 25: ការដាក់ ក ន្ ដ លងទទួ ល កំ ល ៅ......................55 Procedure ..................................55 Post-requisites...................................56 Chapter 26: ការលដាះរន្ ធ អាដាប់ ទ ័ រ ថាមពល......................57 ការលដាះគ្ ល រ ងែំ ល េងលអក្ រ ង់ ..................................57 Prerequisites................................. 57 Procedure..................................57 Procedure....................................60 Chapter 27: លដាះរន្...
  • Page 6 Chapter 36: ការលដាះគ្ ល រ ងែំ ល េងលអក្ រ ង់ ......................80 Prerequisites..................................80 Procedure....................................80 Chapter 37: ការប្ ែ ូ រ គ្ ល រ ងែំ ល េងលអក្ រ ង់ ......................83 Procedure ...................................83 Post-requisites................................... 84 Chapter 38: ការលដាះផ្ ទា ំ ង ប្ រ ព័ ន ្ ធ ........................85 Prerequisites..................................85 Procedure....................................85 Chapter 39: ការប្...
  • Page 7 Post-requisites................................. 108 Chapter 48: ការលដាះត្ រ លច កលអក្ រ ង់ ........................ 109 Prerequisites..................................109 Procedure..................................109 Chapter 49: ការដាក់ ត ្ រ លច កលអក្ រ ង់ ......................... 111 Procedure ...................................111 Post-requisites.................................. 112 Chapter 50: ការលដាះខ្ ដ សលអក្ រ ង់ ........................113 Prerequisites..................................
  • Page 8 ការលបកអង្ គ ចងចាំ Intel Optane..............................125 ការបិ ទ អង្ គ ចងចាំ Intel Optane..............................125 ែែ្ ត ថាមពល WiFi..................................126 ការបញ្ ល ចញថាមពលលសសសល់ ប ន្ ទា ប់ ព ី ប ិ ទ ..............................126 Chapter 57: Getting help and contacting Dell................127 Contents...

  • Page 9: Chapter 1: មុ ន នឹ ង ធ្ ល ែ ី កា រលៅខាងក្ ន ុ ង កុ ំ ព ្ យ ូ ទ ័ រ របស់ អ ្ ន ក

    មុ ន នឹ ង ធ្ ល ែ ី កា រលៅខាងក្ ន ុ ង កុ ំ ព ្ យ ូ ទ ័ រ របស់ អ ្ ន ក ចំ ណា ំ : The images in this document may differ from your computer depending on the configuration you ordered. មុ...

  • Page 10: Chapter 2: ក្ ល រាយពី ធ ្ ល ែ ី កា រលៅខាងក្ ន ុ ង កុ ំ ព ្ យ ូ ទ ័ រ របស់ អ ្ ន ក

    ក្ ល រាយពី ធ ្ ល ែ ី កា រលៅខាងក្ ន ុ ង កុ ំ ព ្ យ ូ ទ ័ រ របស់ អ ្ ន ក អំ ព ី ក ិ ច ្ ច ការលនះ ប្ រ យ័ ត ្ ន : Leaving stray or loose screws inside your computer may severely damage your computer.

  • Page 11: Chapter 3: ការដណនាំ ព ី ស ុ ែ ត្ ថ ិ ភា ព

    You should only perform troubleshooting and repairs as authorized or directed by the Dell technical assistance team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. See the safety instructions that shipped with the product or at www.dell.com/regulatory_compliance.

  • Page 12: ឧបករណ៍ កា រពារការឆ្ ល ងចរន្ ត Esd

    វាត្ រ ូ ែ បានផ្ ត ល់ អ នុ សា សន៍ ឱ ្ យ អ្ ន កបច្ ល ចកលទសលសវាកម្ ម ទាំ ង អស់ ប ្ ល រី ខ ្ ដ សែី ពា ក់ ន ឹ ង កនែ ESD បន្ ដ ថម...

  • Page 13: Chapter 4: ឧបករណ៍ ដ ែលបានដណន

    ឧបករណ៍ ដ ែលបានដណនាំ ែំ ល ណរការក្ ន ុ ង ឯកសារលនះតម្ រ ូ ែ ឲ្ យ មានឧបករណ៍ ែ ូ ច ខាងក្ ល រាម៖ ● Phillips screwdriver #1 ● Flat-head screwdriver ● Plastic scribe ឧបករណ៍ ដ ែលបានដណនាំ...

  • Page 14: Chapter 5: តារាងខ្ ល

    តារាងខ្ ល ៅ ចំ ណា ំ : លៅលពលលដាះខ្ ល ៅលចញពី ស មាសភាគ លយងសូ ម ដណនាំ ឲ ្ យ ធ្ ល ែ ី កា រកត់ ច ំ ណា ំ ប ្ រ លភទខ្ ល ៅ ចំ ន ួ ន ខ្ ល ៅ លហយដាក់ វា លៅក្ ន ុ ង ប្ រ អប់ រ ក្ សា ខ្ ល ៅ។ ធ្ ល ែ ី ដ បបលនះលែម្ ប ី ែ ឹ ង ប្ រា កែពី ច ំ ន ួ ន ខ្ ល ៅ និ ង ប្ រ លភទខ្ ល ៅ លហយអាចរកែ ិ ញ បានលៅលពលដែលសមាសភាគត្ រ ូ ែ បានដាក់ ែ...
  • Page 15 តារាង 1. Screw list (បានបន្ ត ) Component Secured to Screw type Quantity Screw image System board Palm-rest and keyboard M2x3 assembly Touchpad bracket Palm-rest and keyboard M2x2 assembly Wireless-card bracket System board M2x3 តារាងខ្ ល ៅ...

  • Page 16: Chapter 6: ការលដាះគម្ រ បបាត

    Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Procedure About this task Steps 1. Remove the seven screws (M2.5x6) that secure the base cover to the palm-rest and keyboard assembly.
  • Page 17 NOTE: The following steps are applicable only if you want to further remove any other components from your computer. 5. Disconnect the battery cable from the system board. ការលដាះគម្ រ បបាត...
  • Page 18 6. Press and hold the power button for 5 seconds to ground the computer and drain the flea power. ការលដាះគម្ រ បបាត...

  • Page 19: Chapter 7: ការដាក់ គ ម្ រ បបាតចូ ល ែ ិ ញ

    After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Procedure Steps 1. Connect the battery cable to the system board, if applicable.
  • Page 20 3. Replace the seven screws (M2.5x6) that secure the base cover to the palm-rest and keyboard assembly. 4. Tighten the two captive screws that secure the base cover to the palm-rest and keyboard assembly. ការដាក់ គ ម្ រ បបាតចូ ល ែ ិ ញ ។...

  • Page 21: Chapter 8: ការលដាះថ្ ម

    ● ត្ រ ូ ែ ដតទិ ញ ថ្ ម សុ ទ ្ ធ ពិ ត ប្ រា កែពី www.dell.com ឬនែគូ ដ ចកចាយ និ ង អ្ ន កលក់ ប ន្ ត របស់ Dell ដែលបានអនុ ញ ្ ញា ត។ Prerequisites Steps...
  • Page 22 ការលដាះថ្ ម...

  • Page 23: Chapter 9: ការដាក់ ថ ្ ម ចូ ល ែ ិ ញ

    ● ត្ រ ូ ែ ដតទិ ញ ថ្ ម សុ ទ ្ ធ ពិ ត ប្ រា កែពី www.dell.com ឬនែគូ ដ ចកចាយ និ ង អ្ ន កលក់ ប ន្ ត របស់ Dell ដែលបានអនុ ញ ្ ញា ត។ Procedure Steps 1.

  • Page 24: Post-Requisites

    Post-requisites Steps Replace the base cover. ការដាក់ ថ ្ ម ចូ ល ែ ិ ញ ។...

  • Page 25: Chapter 10: ការលដាះមា ូ ឌ ុ ល អង្ គ ចងច

    After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. ការលដាះឧបករណ៍ ប ំ ព ងសំ ល េង ចំ ណា ំ :...

  • Page 26: Procedure

    Procedure About this task NOTE: Depending on the configuration ordered, your computer may come installed with one or two memory modules. Steps 1. Locate the memory module(s) on your computer. ការលដាះមា ូ ឌ ុ ល អង្ គ ចងចាំ...
  • Page 27 2. Use your fingertips to carefully spread apart the securing-clips on each end of the memory-module slot until the memory module pops up. 3. Remove the memory module from the memory-module slot. ការលដាះមា ូ ឌ ុ ល អង្ គ ចងចាំ...

  • Page 28: Chapter 11: ការប្ ែ ូ រ មា ូ ឌ ុ ល អង្ គ ចងច

    Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Procedure About this task NOTE: Depending on the configuration ordered, your computer may come installed with one or two memory modules.

  • Page 29: Post-Requisites

    2. Route the speaker cable through the routing guides on the palm-rest and keyboard assembly. 3. Connect the speaker cable to the system board. Post-requisites Steps Replace the base cover. ការប្ ែ ូ រ មា ូ ឌ ុ ល អង្ គ ចងចាំ...

  • Page 30: Chapter 12: ការលដាះកាតឥតខ្ ដ ស

    Before working inside your computer, read the safety information that shipped with your computer and follow the steps Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Prerequisites Steps Remove the base cover.
  • Page 31 5. Slide and remove the wireless card from the wireless-card slot. ការលដាះកាតឥតខ្ ដ ស...

  • Page 32: Chapter 13: ការប្ ែ ូ រ កាតឥតខ្ ដ ស

    Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Procedure About this task CAUTION: To avoid damage to the wireless card, do not place any cables under it.

  • Page 33: Post-Requisites

    Post-requisites Steps Replace the base cover. ការប្ ែ ូ រ កាតឥតខ្ ដ ស...

  • Page 34: Chapter 14: ការលដាះកង្ ហា រ

    After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Procedure Steps 1. Remove the display cable from the routing guides on the fan.

  • Page 35: Chapter 15: ការប្ ែ ូ រ កង្ ហា រ

    After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Procedure Steps 1. Align the screw holes on the fan with the screw holes on the palm-rest and keyboard board assembly.

  • Page 36: Chapter 16: ការលដាះែ្ រា យស្ ថា នភាពរឹ ង /មា ូ ឌ ុ ល អង្ គ ចងចាំ Intel Optane

    Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Procedure About this task NOTE: The M.2 card slot on your computer may support the following configurations: ●...
  • Page 37 3. Remove the screw (M2x3) that secures the solid-state drive/Intel Optane to the palm-rest and keyboard assembly. 4. Lift the solid-state drive/Intel Optane at an angle and remove it from the solid-state drive/Intel Optane slot. ការលដាះែ្ រា យស្ ថា នភាពរឹ ង /មា ូ ឌ ុ ល អង្ គ ចងចាំ Intel Optane...

  • Page 38: Chapter 17: ការដាក់ ែ ្ រា យស្ ថា នភាពរឹ ង /មា ូ ឌ ុ ល អង្ គ ចងចាំ Intel Optane

    After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. ប្ រ យ័ ត ្ ន : Solid-state drives are fragile. Exercise care when handling the solid-state drive.

  • Page 39: Procedure

    Procedure About this task NOTE: The M.2 card slot on your computer may support the following configurations: ● M.2 2230 solid-state drive ● M.2 2280 solid-state drive ● M.2 2280 Intel Optane NOTE: Depending on the configuration installed a thermal shield may be installed in your computer. If no thermal shield is installed skip steps 4 and 5.
  • Page 40 NOTE: If available, replace the thermal shield after replacing the solid-state drive/Intel Optane. 4. Align the screw hole on the thermal shield with the screw hole on the palm-rest and keyboard assembly. 5. Replace the screw (M2x3) that secures the thermal shield to the palm-rest and keyboard assembly. ការដាក់...
  • Page 41 ការដាក់ ែ ្ រា យស្ ថា នភាពរឹ ង /មា ូ ឌ ុ ល អង្ គ ចងចាំ Intel Optane...

  • Page 42: Chapter 18: ការលដាះែ្ រា យថាសរឹ ង

    After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. ប្ រ យ័ ត ្ ន : Hard drives are fragile. Exercise care when handling the hard drive.
  • Page 43 4. Disconnect the interposer from the hard-drive assembly. 5. Remove the four screws (M3x3) that secure the hard-drive bracket to the hard drive. 6. Lift the hard-drive bracket off the hard drive. ការលដាះែ្ រា យថាសរឹ ង ៖...
  • Page 44 ការលដាះែ្ រា យថាសរឹ ង ៖...

  • Page 45: Chapter 19: ការដាក់ ែ ្ រា យថាសរឹ ង

    After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. ប្ រ យ័ ត ្ ន : Hard drives are fragile. Exercise care when handling the hard drive.

  • Page 46: Post-Requisites

    4. Align the screw holes on the hard-drive assembly with the screw holes on the palm-rest and keyboard assembly. 5. Replace the four screws (M2x3) that secure the hard-drive assembly to the palm-rest and keyboard assembly. 6. Connect the hard-drive cable to the system board and close the latch to secure the cable. Post-requisites Steps 1.

  • Page 47: Chapter 20: ការលដាះឧបករណ៍ ប ំ ព ងសំ ល េង

    Before working inside your computer, read the safety information that shipped with your computer and follow the steps Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Prerequisites Steps Remove the base cover.

  • Page 48: Chapter 21: ការប្ ែ ូ រ ឧបករណ៍ ប ំ ព ងសំ ល េង

    Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Procedure About this task NOTE: If the rubber grommets are pushed out when removing the speakers, push them back in before replacing the speakers.

  • Page 49: Chapter 22: ការលដាះបន្ ទ ះប

    Before working inside your computer, read the safety information that shipped with your computer and follow the steps Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Prerequisites Steps 1. Remove the base cover.
  • Page 50 ការលដាះបន្ ទ ះបា ះ...

  • Page 51: Chapter 23: ការដាក់ ប ន្ ទ ះបា ះ ចូ ល

    Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Procedure About this task NOTE: Ensure that the touchpad is aligned with the guides available on the palm-rest and keyboard assembly, and the gap on either sides of the touchpad is equal.

  • Page 52: Post-Requisites

    Post-requisites Steps 1. Replace the battery. 2. Replace the base cover. ការដាក់ ប ន្ ទ ះបា ះ ចូ ល...

  • Page 53: Chapter 24: ការលដាះកន្ ដ លងទទួ ល កំ ល

    After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. ចំ ណា ំ : The heat sink may become hot during normal operation. Allow sufficient time for the heat sink to cool before you touch ប្...
  • Page 54 ការលដាះកន្ ដ លងទទួ ល កំ ល ៅ...

  • Page 55: Chapter 25: ការដាក់ ក ន្ ដ លងទទួ ល កំ ល

    After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. ប្ រ យ័ ត ្ ន : Incorrect alignment of the heat sink can damage the system board and processor.

  • Page 56: Post-Requisites

    Post-requisites Steps 1. Replace the fan. 2. Replace the base cover. ការដាក់ ក ន្ ដ លងទទួ ល កំ ល ៅ...

  • Page 57: Chapter 26: ការលដាះរន្ ធ អាដាប់ ទ ័ រ ថាមពល

    After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. ការលដាះគ្ ល រ ងែំ ល េងលអក្ រ ង់ ចំ ណា ំ :...
  • Page 58 6. Lift the palm-rest and keyboard assembly at an angle. 7. Slide and remove the palm-rest and keyboard assembly off the display assembly. ការលដាះរន្ ធ អាដាប់ ទ ័ រ ថាមពល...
  • Page 59 8. After performing all the above steps, you are left with display assembly. ការលដាះរន្ ធ អាដាប់ ទ ័ រ ថាមពល...

  • Page 60: Procedure

    Procedure Steps 1. Remove the three screws (M2.5x5) that secure the right hinge to the system board and palm-rest and keyboard assembly. 2. Lift the right hinge. 3. Disconnect the power-adapter port cable from the system board. 4. Remove the screw (M2x3) that secures the power-adapter port to the palm-rest and keyboard assembly. 5.
  • Page 61 ការលដាះរន្ ធ អាដាប់ ទ ័ រ ថាមពល...

  • Page 62: Chapter 27: លដាះរន្ ធ អាដាប់ ទ ័ រ ថាមពល

    After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Procedure Steps 1. Align the screw hole on the power-adapter port with the screw hole on the palm-rest and keyboard assembly.

  • Page 63: ការប្ ែ ូ រ គ្ ល រ ងែំ ល េងលអក្ រ ង

    Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Procedure About this task NOTE: Ensure that the hinges are opened to the maximum before replacing the display assembly on palm-rest and keyboard assembly.
  • Page 64 3. Using the alignment posts, press the hinges down on the system board and the palm-rest and keyboard assembly. 4. Replace the six screws (M2.5x5) that secure the left and right hinges to the system board and palm-rest and keyboard assembly.

  • Page 65: Post-Requisites

    Post-requisites Steps 1. Replace the wireless card. 2. Replace the base cover. លដាះរន្ ធ អាដាប់ ទ ័ រ ថាមពល...

  • Page 66: Chapter 28: ការលដាះផ្ ទា ំ ង I/O

    Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Prerequisites Prerequisites CAUTION: Disconnecting the I/O board resets the BIOS setup program’s settings to default. Before disconnecting the I/O board, it is recommended to note the BIOS setup program’s settings.
  • Page 67 3. Open the latches and disconnect the I/O-board cables from the system board. 4. Peel the I/O-board cables from the palm-rest and keyboard assembly. 5. Remove the two screws (M2x3) that secure the I/O board to the palm-rest and keyboard assembly. 6.
  • Page 68 ការលដាះផ្ ទា ំ ង I/O...

  • Page 69: Chapter 29: ការប្ ែ ូ រ ផ្ ទា ំ ង I/O

    After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Procedure Steps 1. Using the alignment posts, place the I/O board on the palm-rest and keyboard assembly.

  • Page 70: Post-Requisites

    5. Close the left hinge. 6. Replace the three screws (M2.5x5) that secure the left hinge to the palm-rest and keyboard assembly. Post-requisites Steps 1. Replace the hard drive. 2. Replace the battery. 3. Replace the base cover. ការប្ ែ ូ រ ផ្ ទា ំ ង I/O...

  • Page 71: Chapter 30: ការលដាះថ្ ម គ្ រា ប់ ស ំ ដ បា ត

    After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. ប្ រ យ័ ត ្ ន : Removing the coin-cell battery resets the BIOS setup program’s settings to default. It is recommended that you note the BIOS setup program’s settings before removing the coin-cell battery.

  • Page 72: Chapter 31: ការប្ ែ ូ រ ថ្ ម គ្ រា ប់ ស ំ ដ បា ត

    After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Procedure Steps With the positive-side facing up, snap the coin-cell battery into the battery socket on the I/O board.

  • Page 73: Chapter 32: ការលដាះបន្ ទ ះប៊ ូ ត ុ ង ថាមពល

    Before working inside your computer, read the safety information that shipped with your computer and follow the steps Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Prerequisites Steps 1. Remove the base cover.

  • Page 74: Chapter 33: ដាក់ ប ន្ ទ ះប៊ ូ ត ុ ង ថាមពល

    After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Procedure Steps 1. Using the clip and alignment posts, slide and adhere the power-button board and its cable to the palm-rest and keyboard assembly.
  • Page 75 2. Replace the base cover. ដាក់ ប ន្ ទ ះប៊ ូ ត ុ ង ថាមពល...

  • Page 76: Chapter 34: ការលដាះប៊ ូ ត ុ ង ថាមពលជាមួ យ កម្ ម ែ ិ ធ ី អា នស្ នា មក្ រ ល៉ៅា ន

    After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. ចំ ណា ំ : អនុ ែ ត្ ត សម្ រា ប់ ដ តកុ ំ ព ្ យ ូ ទ ័ រ ដែលភ្ ជា ប់ ជា មួ យ កម្ ម ែ ិ ធ ី អា នស្ នា មក្ រ ល៉ៅា នែបា ុ ណ ្ លណាះ។...
  • Page 77 ការលដាះប៊ ូ ត ុ ង ថាមពលជាមួ យ កម្ ម ែ ិ ធ ី អា នស្ នា មក្ រ ល៉ៅា នែ...

  • Page 78: Chapter 35: ការប្ ែ ូ រ ប៊ ូ ត ុ ង ថាមពលជាមួ យ កម្ ម ែ ិ ធ ី អា នស្ នា មក្ រ ល៉ៅា ន

    After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. ចំ ណា ំ : អនុ ែ ត្ ត សម្ រា ប់ ដ តកុ ំ ព ្ យ ូ ទ ័ រ ដែលភ្ ជា ប់ ជា មួ យ កម្ ម ែ ិ ធ ី អា នស្ នា មក្ រ ល៉ៅា នែបា ុ ណ ្ លណាះ។...

  • Page 79: Post-Requisites

    Post-requisites Steps 1. Replace the board. 2. Replace the hard drive. 3. Replace the battery. 4. Replace the base cover. ការប្ ែ ូ រ ប៊ ូ ត ុ ង ថាមពលជាមួ យ កម្ ម ែ ិ ធ ី អា នស្ នា មក្ រ ល៉ៅា នែ...

  • Page 80: Chapter 36: ការលដាះគ្ ល រ ងែំ ល េងលអក្ រ ង

    Before working inside your computer, read the safety information that shipped with your computer and follow the steps Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Prerequisites Steps 1. Remove the base cover.
  • Page 81 6. Lift the palm-rest and keyboard assembly at an angle. 7. Slide and remove the palm-rest and keyboard assembly off the display assembly. ការលដាះគ្ ល រ ងែំ ល េងលអក្ រ ង់...
  • Page 82 8. After performing all the above steps, you are left with display assembly. ការលដាះគ្ ល រ ងែំ ល េងលអក្ រ ង់...

  • Page 83: Chapter 37: ការប្ ែ ូ រ គ្ ល រ ងែំ ល េងលអក្ រ ង

    Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Procedure About this task NOTE: Ensure that the hinges are opened to the maximum before replacing the display assembly on palm-rest and keyboard assembly.

  • Page 84: Post-Requisites

    6. Slide the display cable to the connector on the system board and close the latch to secure the cable. 7. Replace the tape that secures the display-cable latch to the system board. Post-requisites Steps 1. Replace the wireless card. 2.

  • Page 85: Chapter 38: ការលដាះផ្ ទា ំ ង ប្ រ ព័ ន ្ ធ

    After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. ចំ ណា ំ : Your computer’s Service Tag is stored in the system board. You must enter the Service Tag in the BIOS setup program after you replace the system board.
  • Page 86 3. Disconnect the power-adapter port cable from the system board. 4. Disconnect the speaker cable from the system board. 5. Open the latch and disconnect the keyboard from the system board. 6. Open the latch and disconnect the touchpad cable from the system board. 7.
  • Page 87 11. Remove the two screws (M2x2) that secure the system board to palm-rest and keyboard assembly. 12. Remove the two screws (M2x3) that secure the system board to palm-rest and keyboard assembly. 13. Lift the system board off the palm-rest and keyboard assembly. ការលដាះផ្...
  • Page 88 ការលដាះផ្ ទា ំ ង ប្ រ ព័ ន ្ ធ...

  • Page 89: Chapter 39: ការប្ ែ ូ រ ផ្ ទា ំ ង ប្ រ ព័ ន ្ ធ

    After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. ចំ ណា ំ : Your computer’s Service Tag is stored in the system board. You must enter the Service Tag in the BIOS setup program after you replace the system board.
  • Page 90 4. Slide the power-button board cable into the connector on the system board and close the latch. 5. Slide the first I/O-board cable into the connector on the system board and close the latch. 6. Slide the second I/O-board cable into the connector on the system board and close the latch. 7.
  • Page 91 12. Close the right display hinge. 13. Replace the three screws (M2.5x5) that secure the right hinge to the system board and palm-rest and keyboard assembly. ការប្ ែ ូ រ ផ្ ទា ំ ង ប្ រ ព័ ន ្ ធ...

  • Page 92: Post-Requisites

    1. សបប្ ក ឬចាប់ ស ល្ ត ប្ ម សបប្ ក កុ ំ ព ្ យ ូ ទ ័ រ រលប់ អ ្ ន កលសប្ ង ភិ ញ ។ 2. ចុ ច F2 លៅសពលល ូ ហ ្ គ ូ Dell រានបង្ ហា ញដសប្ ម ្ ប ី ប ញចា ូ ល កម្ ម ភិ ធ ី ដ ំ ល សប្ ង BIOS ។...

  • Page 93: Chapter 40: ការលដាះកន្ ដ លងដាក់ បា តនែ និ ង គ្ ល រ ងតម្ ល លងក្ ដា រចុ ច

    Before working inside your computer, read the safety information that shipped with your computer and follow the steps Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Prerequisites Steps 1. Remove the base cover.
  • Page 94 ការលដាះកន្ ដ លងដាក់ បា តនែ និ ង គ្ ល រ ងតម្ ល លងក្ ដា រចុ ច...

  • Page 95: Chapter 41: ការប្ ែ ូ រ កន្ ដ លងដាក់ បា តនែ និ ង គ្ ល រ ងតម្ ល លងក្ ដា រចុ ច

    After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Procedure About this task Place the palm-rest and keyboard assembly on a flat and clean surface.
  • Page 96 5. Replace the display assembly. 6. Replace the power-adapter port. 7. Replace the touchpad. 8. Replace the hard drive. 9. Replace the speakers. 10. Replace the wireless card. 11. Replace the solid-state drive/Intel Optane. 12. Replace the fan. 13. Replace the battery. 14.

  • Page 97: Chapter 42: ការលដាះស៊ ុ ម ក្ ល ៅរបស់ ល អក្ រ ង

    Before working inside your computer, read the safety information that shipped with your computer and follow the steps Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Prerequisites Steps 1. Remove the base cover.
  • Page 98 ការលដាះស៊ ុ ម ក្ ល ៅរបស់ ល អក្ រ ង់...

  • Page 99: Chapter 43: ការលដាះស៊ ុ ម ក្ ល ៅរបស់ ល អក្ រ ង

    After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Procedure Steps Align the display bezel with the display back-cover and antenna assembly, and then gently snap the display bezel into place.

  • Page 100: Chapter 44: ការលដាះកាលមរ

    Before working inside your computer, read the safety information that shipped with your computer and follow the steps Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Prerequisites Steps 1. Remove the base cover.
  • Page 101 ការលដាះកាលមរា ា...

  • Page 102: Chapter 45: ការប្ ែ ូ រ កាលមរ

    After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Procedure Steps 1. Connect the camera cable to the camera module.

  • Page 103: Post-Requisites

    Post-requisites Steps 1. Replace the display bezel. 2. Replace the display assembly. 3. Replace the wireless card. 4. Replace the base cover. ការប្ ែ ូ រ កាលមរា ា...

  • Page 104: Chapter 46: លែម្ ប ី ល ដាះផ្ ទា ំ ង លអក្ រ ង

    Before working inside your computer, read the safety information that shipped with your computer and follow the steps Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Prerequisites Steps 1. Remove the base cover.
  • Page 105 3. Peel the tape adhering the display cable to the back of the display panel. 4. Lift the latch and disconnect the display cable from the display-panel cable connector. 5. Lift the display panel away from the display back-cover and antenna assembly. លែម្...
  • Page 106 លែម្ ប ី ល ដាះផ្ ទា ំ ង លអក្ រ ង់...

  • Page 107: Chapter 47: ការដាក់ ផ ្ ទា ំ ង លអក្ រ ង

    After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Procedure Steps 1. Place the display panel on a flat and clean surface.

  • Page 108: Post-Requisites

    Post-requisites Steps 1. Replace the display bezel. 2. Replace the display assembly. 3. Replace the wireless card. 4. Replace the base cover. ការដាក់ ផ ្ ទា ំ ង លអក្ រ ង់...

  • Page 109: Chapter 48: ការលដាះត្ រ លច កលអក្ រ ង

    Before working inside your computer, read the safety information that shipped with your computer and follow the steps Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Prerequisites Steps 1. Remove the base cover.
  • Page 110 ការលដាះត្ រ លច កលអក្ រ ង់...

  • Page 111: Chapter 49: ការដាក់ ត ្ រ លច កលអក្ រ ង

    After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Procedure Steps 1. Align the screw holes on the display hinges and brackets with the screw holes on the display back-cover and antenna assembly.

  • Page 112: Post-Requisites

    Post-requisites Steps 1. Replace the display panel. 2. Replace the display bezel. 3. Replace the display assembly. 4. Replace the wireless card. 5. Replace the base cover. ការដាក់ ត ្ រ លច កលអក្ រ ង់...

  • Page 113: Chapter 50: ការលដាះខ្ ដ សលអក្ រ ង

    Before working inside your computer, read the safety information that shipped with your computer and follow the steps Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Prerequisites Steps 1. Remove the base cover.
  • Page 114 ការលដាះខ្ ដ សលអក្ រ ង់...

  • Page 115: Chapter 51: ការដាក់ ខ ្ ដ សលអក្ រ ង់ ច ូ ល

    After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Procedure Steps Route the display cable through the routing guides on the display back-cover and antenna assembly.

  • Page 116: Chapter 52: លដាះគម្ រ បខាងក្ ល រាយលអក្ រ ង់ និ ង គ្ ល រ ងែំ ល េងអង់ ដ តន

    Before working inside your computer, read the safety information that shipped with your computer and follow the steps Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Prerequisites Steps 1. Remove the base cover.
  • Page 117 លដាះគម្ រ បខាងក្ ល រាយលអក្ រ ង់ និ ង គ្ ល រ ងែំ ល េងអង់ ដ តន...

  • Page 118: Chapter 53: ការដាក់ គ ម្ រ បក្ ល រាយលអក្ រ ង់ និ ង គ្ ល រ ងែំ ល េងអង់ ដ តន

    After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Procedure Steps Place the display back-cover and antenna assembly on a clean and flat surface.
  • Page 119 5. Replace the display bezel. 6. Replace the display assembly. 7. Replace the wireless card. 8. Replace the base cover. ការដាក់ គ ម្ រ បក្ ល រាយលអក្ រ ង់ និ ង គ្ ល រ ងែំ ល េងអង់ ដ តន...

  • Page 120: Chapter 54: ែ្ រា យែ ឺ ឧ បករណ

    ក្ ន ុ ង Device Manager ចូ រ ពិ ន ិ ត ្ យ លមល ថាលតែ្ រា យែ ឺ ស ំ ណ ុ ំ ឈ ី ប ត្ រ ូ ែ បានតម្ ល លង លហយឬលៅ។ តម្ ល លងការអាប់ ល ែតសំ ណ ុ ំ ឈ ី ប Intel ពី www.dell.com/support ។...

  • Page 121: Chapter 55: ការលរ បចំ ប ្ រ ព័ ន ្ ធ

    2. ក្ ន ុ ង អំ េ ុ ង លពល POST លៅលពលស្ ោ កសញ្ ញា DELL ត្ រ ូ ែ បានបង្ ហា ញ ត្ រ ូ ែ រង់ ចា ំ ល មលការស្ ល ន F2 ដែលលលចលេង បន្ ទា ប់ ម កត្...

  • Page 122: ការសម្ អា តការកំ ណ ត់ Cmos

    អំ ព ី ក ិ ច ្ ច ការលនះ លែម្ ប ី ស ម្ អា តប្ រ ព័ ន ្ ធ ឬ លលខសម្ ងា ត់ BIOS សូ ម ទាក់ ទ ងលៅកាន់ អ ្ ន កផ្ ត ល់ ល សវាបច្ ល ចកទសរបស់ Dell ែូ ច បានពណ៌ នា លៅ...

  • Page 123: Chapter 56: ការលដាះស្ រា យបញ្ ហ

    4. ភ្ ជា ប់ ែ ្ រា យ USB ដែលអាចប៊ ូ ត បានលៅកុ ំ ព ្ យ ូ ទ ័ រ របស់ អ ្ ន កដែលត្ រ ូ ែ ការអាប់ ដ ែត BIOS ។ 5. ចាប់ ផ ្ ល ែមកុ ំ ព ្ យ ូ ទ ័ រ លេងែ ិ ញ និ ង ចុ ច F12 លៅលពលេូ ហ ្ គ ូ Dell បានបង្ ហា ញលៅលលលអក្ រ ង់ ។...

  • Page 124: ការែំ ល ណរការែ ិ ន ិ ច ្ ឆ ័ យ Epsa

    1. លបកកុ ំ ព ្ យ ូ ទ ័ រ របស់ អ ្ ន ក។ 2. លពលដែលកុ ំ ព ្ យ ូ ទ ័ រ ប៊ ូ ត ចុ ច ប៊ ូ ត ុ ង F12 ខណៈលពលនិ ម ិ ត ្ ត សញ្ ញា Dell បង្ ហា ញលេង។...

  • Page 125: ការលបកអង្ គ ចងចាំ Intel Optane

    តារាង 3. លលខកូ ែ LED (បានបន្ ត ) លលខកូ ែ ភ្ ល លងែ ិ ន ិ ច ្ ឆ ័ យ ការបរិ យ៉ យពី ប ញ្ ហា បរាជ័ យ PCI, កាតែ ី ឌ ី អ ូ / ឈី ប រកមិ ន លឃញរូ ប ភាពស្ តា រលេងែ ិ ញ រកលឃញរូ...

  • Page 126: ត ថាមពល Wifi

    ែែ្ ត ថាមពល WiFi អំ ព ី ក ិ ច ្ ច ការលនះ ប្ រ សិ ន លបកុ ំ ព ្ យ ូ ទ ័ រ របស់ អ ្ ន កមិ ន អាចភ្ ជា ប់ អ ុ ី ន ធឺ ល ណត លដាយសារ បញ្ ហា ការតភ្ ជា ប់ តា មរយៈ WiFi លនាះដបបបទែែ្ ត ថាមពល WiFi អាចត្ រ ូ ែ បានអនុ ែ ត្ ត ។ ដបបបទខាងក្ ល រាមផ្ ត ល់ ន ូ ែ ការដណនាំ ព ី រ លប បអនុ ែ ត្ ត ែែ្ ត ថាមពល WiFi ៖ ចំ...

  • Page 127: Chapter 57: Getting Help And Contacting Dell

    Getting help and contacting Dell Self-help resources You can get information and help on Dell products and services using these self-help resources: Table 4. Self-help resources Self-help resources Resource location Information about Dell products and services www.dell.com My Dell app...

This manual is also suitable for:

P85f

Table of Contents