• This unit utilizes a laser. Use of controls or adjustments owner. Panasonic has no authority to and does not grant or performance of procedures other than those you that permission and explicitly disclaims any right,...
Bluetooth SIG, Inc. and any use of mains plug (figures A and B). Confirm the AC mains plug such marks by Panasonic Corporation is under license. fitted and follow the instructions below. Other trademarks and trade names are those of their Illustrations may differ from actual AC mains plug.
About Bluetooth Placement of speakers ® Panasonic bears no responsibility for data and/or The left and right speakers are the same. information that is compromised during a wireless transmission. Frequency band • This system uses the 2.4 GHz frequency band.
Connect the speakers. Making the connections Attaching the ferrite core Connect the AC mains lead only after all the other Pull on the tab to open. connections have been made. Put the speaker cables onto one of the concave surfaces. Make sure the ferrite core is at about 5 cm away from the end of the speaker cables.
View the setup menu Recording operation control Operate a Panasonic TV (compatible models only) Point the remote control to a Panasonic TV: [`/TV]: Switch on or switch off the TV [AV/INPUT]: Change the video input mode of the TV [VOL +/–]: Adjust the volume level of the TV...
Page 7
SELECT SOUND SELECT SOUND KARAOKE MIC VOL MIC 1 MIC 2 Open or close the disc tray Display panel Knob for DJ and multi control Remote control sensor Distance: Within approximately 7 m Disc tray Angle: Approximately 20° up and down, Microphone jack 30°...
If prompted for a passkey, input “0000” or “1234”. The device connects with this system automatically after pairing is complete. The MAC address (example: 6C:5A:B5:B3:1D:0F) may be shown before “SC-AKX910” is shown. The name of the connected device is shown for a few seconds.
Play menu Media playback CD USB MEMORY The following marks indicate the availability of the feature. Press [PLAY MENU]. CD-R/RW in CD-DA format or with MP3 files. USB device with MP3 files. Press [Y, U] to select the setting and then press Bluetooth device.
█ Note on disc Memory presetting • This system can play CD-R/RW with CD-DA or MP3 format content. You can preset up to 30 FM stations and 15 AM stations. • Before playback, finalise the disc on the device it was recorded on.
Note: Checking the signal status • All recordings are in “.mp3” format. • You cannot do recording when you are using random When “FM” is selected playback mode. • Press [DISPLAY]. The DJ function or Karaoke function is switched off when you start recording.
█ Adding track marks Deleting the recorded tracks When recording from radio or AUX, you can divide tracks Press [SELECT <, >] repeatedly to select “MEMORY” using various modes. or “USB B”. Before recording Press [REC MODE] to select the mode. Press [R, T] to select the album.
Using the “Panasonic MAX Juke” app You can download and install the free Android™ app DJ effect “Panasonic MAX Juke” on Google Play™ for additional features, such as to request song playback from multiple (Except for AUX source) devices simultaneously.
Or turn [MULTI CONTROL]. change to another source. TEMPO CD USB MEMORY Using the “Panasonic MAX Juke” app Change the speed of a song. You can change the sample sound on the app. (To return Change the background music all sample sounds to the factory preset, when in the stop level.
█ Changing the repeat setting Play timer and record timer Press [PLAY MENU]. (Except for Bluetooth and AUX source) ® You can set the timer to come on at a certain time to: Press [Y, U] to select the setting and then press •...
AUX mode Software update Press [PLAY MENU] to select “AUX MODE”. Occasionally, Panasonic may release updated software for this unit that may add or improve the way a feature Press [Y, U] to select the mode and then press operates. These updates are available free of charge. For [OK].
• For some built-in Bluetooth devices, you have to set the ® audio output to “SC-AKX910” manually. Read the operating No operations can be done with the remote control. instructions of the device for details. • Examine that the battery is installed correctly.
Page 18
Remote control code “INSERT USB B” • You cannot do recording because there is no USB device When other Panasonic equipment responds to the remote connected to USB B control of this system, change the remote control code for this system.
Specifications █ General █ Disc section Disc played (8 cm or 12 cm) Power supply AC 220 V to 240 V, 50/60 Hz CD, CD-R/RW (CD-DA, MP3 ) Power consumption 225 W MPEG-1 Layer 3, MPEG-2 Layer 3 Power consumption in standby mode (approximate) Pick up With “BLUETOOTH STANDBY”...