hit counter script
HP ProLiant DL145 Maintenance And Service Manual
  1. Manuals
  2. Brands
  3. HP Manuals
  4. Server
  5. ProLiant DL145
  6. Maintenance and service manual
HP ProLiant DL145 Maintenance And Service Manual

HP ProLiant DL145 Maintenance And Service Manual

Hide thumbs Also See for ProLiant DL145:
Table of Contents

Advertisement

Quick Links

Download this manual
All manuals and user guides at all-guides.com
HP ProLiant DL145 Generation 2 Server
Maintenance and Service Guide
June 2006 (Third Edition)
Part Number 381741-003

Advertisement

Table of Contents
loading

Related Manuals for HP ProLiant DL145

Summary of Contents for HP ProLiant DL145

  • Page 1 All manuals and user guides at all-guides.com HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide June 2006 (Third Edition) Part Number 381741-003...
  • Page 2 The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

  • Page 3: Table Of Contents

    System Board Configuration ........................2-27 Processor............................2-27 Memory............................. 2-33 PCI Expansion Boards ........................2-36 System Battery..........................2-41 System Fans............................. 2-43 System Fan Connections........................2-43 Power Supply Unit (PSU) ........................2-46 HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...
  • Page 4 System Unit..............................5-2 Memory..............................5-5 Processor ..............................5-5 IDE CD-ROM Drive..........................5-6 Non-hot-plug Hard Drives .........................5-7 SCSI Hard Drive ..........................5-7 SATA Hard Drive ..........................5-8 SATA and Ultra ATA/133 controller ......................5-9 Gigabit Ethernet Controller........................5-9 Index HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...

  • Page 5: Illustrated Parts Catalog

    HP's customer self-repair program offers you the fastest service under either warranty or contract. It enables HP to ship replacement parts directly to you so that you can replace them. Using this program, you can replace parts at your own convenience.

  • Page 6: Mechanical Parts Exploded View

    EU. In this case either the Original Spare or the Modified Spare may be shipped which will not affect performance or functionality of the unit. *Directive 2002/95/EC restricts the use of lead, mercury, cadmium, hexavalent chromium, PBBs and PBDEs in electronic products. HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...

  • Page 7: System Components Exploded View

    AMD Opteron Processor 275 (2.2 GHz) * — 395813-005 d) AMD Opteron Processor 280 (2.4 GHz) * 403407-001 — e) AMD Opteron Processor 286 (2.6 GHz) * — 411263-001 continued HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...
  • Page 8 - Drive module only 403254-B21 — - Drive module with carrier 395473-B21 — Non-hot-plug SATA hard drive a) 80 GB 373311-005 — b) 160 GB 373312-005 — c) 250 GB 373313-005 — continued HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...
  • Page 9 EU. In this case either the Original Spare or the Modified Spare may be shipped which will not affect performance or functionality of the unit. *Directive 2002/95/EC restricts the use of lead, mercury, cadmium, hexavalent chromium, PBBs and PBDEs in electronic products. HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...

  • Page 10: Hp Contact Information

    In other locations, see the Contact HP worldwide (in English) webpage (http://welcome.hp.com/country/us/en/wwcontact.html). For HP technical support: • In the United States, for contact options see the Contact HP United States webpage (http://welcome.hp.com/country/us/en/contact_us.html). To contact HP by phone: • Call 1-800-HP-INVENT (1-800-474-6836). This service is available 24 hours a day, 7 days a week.

  • Page 11: Removal And Replacement Procedures

    (i.e., Label 1 corresponds to step a, label 2 corresponds to step b, etc.). NOTE: The procedures described in this chapter assume that the server is out of the rack and is positioned on a flat, stable surface. HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...

  • Page 12: Hardware Configuration Warnings

    Hardware Configuration Warnings Read the following sections before performing any servicing or troubleshooting procedure. WARNING: Only authorized technicians trained by HP should attempt to repair this equipment. Because of the complexity of the individual boards and subassemblies, no one should attempt to make repairs at the component level or to make modifications to any printed wiring board.

  • Page 13: Rack Warnings

    115 kg (253 lb), is over 2.1 m (7 ft) tall, and may become unstable when being moved on its casters. Do not stand in front of the rack as it rolls down the ramp from the pallet. Handle the rack from both sides. HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...

  • Page 14: Server Warnings And Precautions

    Cover workstations with approved static-dissipating material. Use a wrist strap connected to the work surface, and properly grounded (earthed) tools and equipment. • Keep work area free of nonconductive materials, such as ordinary plastic assembly aids and foam packing. HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...

  • Page 15: Pre-Installation Procedures

    4. Follow the ESD precautions listed in the previous page when handling a server component. IMPORTANT: To streamline the configuration process, read through the entire installation/removal procedure first and make sure you understand them before you before you begin. HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...

  • Page 16: Post-Installation Procedures

    3. Disconnect the AC power cord from the AC outlet and then from the server. 4. Be sure that the power LED indicator is turned off and that the fan noise has stopped. 5. Disconnect all external peripheral devices from the server. HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...

  • Page 17: Opening The Server

    Align the cover to the chassis and then slide it towards the front panel to position it into place. b. Once the cover is attached to the chassis, secure it by tightening the captive thumbscrew on the rear panel. HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...

  • Page 18: Drive Bay Configuration

    Figure 2-3: Drive bay configuration Item Description 1-inch hard disk drive bays (two) Optical media device bay HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...

  • Page 19: Cable Routing Diagrams

    Optical Media Drive Cable Routing Figure 2-4: Optical media drive cable routing Item Description IDE data cable Optical media drive power cable HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...
  • Page 20 PCI-X riser board slot SATA Hard Drive Cable Routing Figure 2-6: SATA hard drive cable routing when Description SATA drive power cable SATA drive data cable 2-10 HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...

  • Page 21: Optical Media Drive

    CAUTION: Do not discard the drive carrier bezel. If the optical drive is removed in the future, this bezel must be reinstalled in the chassis for the proper cooling of the system. Figure 2-7: Preparing the optical media device bay for installation 2-11 HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...
  • Page 22 Connect the IDE data and power cables to their corresponding connectors on the rear of the drive. Figure 2-9: Installing the CD-ROM drive assembly in the chassis 6. Perform the post-installation procedures described on page 2-6. 2-12 HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...

  • Page 23: Hard Drives

    The 160- and 250-GB SATA drive options come with a hot-plug HDD carrier. You need to remove the drives from their default carriers before installing them in the server. Use the HDD carriers and mounting screws included with your server to install these drives. 2-13 HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...
  • Page 24 3. Remove the hard drive from the chassis: a. Loosen the screw that secures the HDD carrier to the chassis. b. Push the HDD carrier towards the front of the chassis, then slide it out completely. 2-14 HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...
  • Page 25 IMPORTANT: If you removed a hard drive without plans of installing a new one, you must reinstall the mounting screws at their pre-installed location for future use, then reinstall the HDD carrier in the chassis for the proper cooling of the system. 2-15 HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...
  • Page 26 Align the new hard drive on the carrier. b. Secure the hard drive assembly with the four mounting screws. c. Slide the hard drive assembly into the chassis. 2-16 HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...
  • Page 27 CAUTION: Do not discard the slot cover. If the expansion board is removed in the future, the slot cover must be reinstalled to maintain proper cooling. Figure 2-17: Removing the cover of the low–profile expansion slot 2-17 HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...
  • Page 28 6. Slide the SCSI controller board into the slot. Firmly press the board to seat it properly on the slot. Figure 2-19: Installing the SCSI controller board in the low–profile expansion slot 2-18 HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...
  • Page 29 SCSI controller board you installed. Figure 2-21: SCSI cable parts Item Description Connector end 240 mm location Terminator end 2-19 HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...
  • Page 30 Open the protective mylar sheet on the air duct. e. Lay the cable flat in the slot on the air duct surface. Figure 2-23: SCSI cable routing for low-profile controller boards phase 2 2-20 HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...
  • Page 31 Check that all cables are clear of the hard drive carrier and are properly routed to their corresponding connectors, then tighten the screw that secures the hard drive assembly to the chassis. 2-21 HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...
  • Page 32 Fold the connector end of the SCSI cable in the manner illustrated in the following figure. c. Attach a tie wrap (included in the SCSI cable option kit) in the 240 mm location of the cable. 2-22 HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...
  • Page 33 Disconnect the following cables from their system board connectors— the 8-pin ATX processor power cable, the 24-pin ATX system board power cable, and the 4- pin I C PSU cable. 2-23 HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...
  • Page 34 Check that all cables are clear of the hard drive carrier and are properly routed to their corresponding connectors, then tighten the screw that secures the hard drive assembly to the chassis. 2-24 HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...
  • Page 35 Configuring a SATA hard drive is a two-step process that includes: 1. Install the SATA hard drive. 2. Set up the SATA configuration. For detailed procedures, refer to the Server Support CD or to the operating system documentation. 2-25 HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...
  • Page 36 3. Perform the post-installation procedures described on page 2-6. 4. Set up the SATA configuration. For detailed procedures, refer to the Server Support CD or to the operating system documentation. 2-26 HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...

  • Page 37: System Board Configuration

    The default system comes with a single processor installed in the processor socket 1. The empty processor socket 2 is protected by an air baffle. Figure 2-32: Processor socket numbers 2-27 HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...
  • Page 38 3. Lift the air duct away from the processor sockets. Keep it for reinstallation later. Figure 2-33: Removing the air duct 4. Locate the processor you want to remove. 2-28 HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...
  • Page 39 Grasp the processor by its edges and lift it out of its socket. Figure 2-35: Removing the processor 7. Place the processor on a static-dissipating work surface or inside an anti-static bag. 2-29 HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...
  • Page 40 Refer to Figure 2-34 for related illustration. b. Insert the processor into the socket. c. Engage the socket retention lever back into place. 2-30 HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...
  • Page 41 Make sure that this material has no scratches or gaps. If it does have any scratches or gaps, contact your HP Customer Support provider for replacement. CAUTION: To prevent overheating or a possible system crash, use only a heat sink model specified for the HP ProLiant DL145 Generation 2 server.
  • Page 42 Clean the contact surface of both the processor and heat sink with an alcohol pad, and re-apply a thin layer of an HP approved thermal interface material before re-installing the processor. HP recommends using ShinEtsu G751 thermal grease compound for your ProLiant server.

  • Page 43: Memory

    Observe the following important guidelines when installing memory modules: • Use only HP supported PC3200 (400 MHz) registered ECC DIMMs in 512 MB, 1 GB, or 2 GB capacities IMPORTANT: Use only HP supplied DIMMs. DIMMs from other sources can adversely affect data integrity.
  • Page 44 Completely open the holding clips securing the module. This forces the module up in the slot and makes it easier to remove. b. Gently pull the memory module upward to remove it from its slot. 2-34 HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...
  • Page 45 Firmly press the holding clips inward to secure the memory module in place. If the holding clips do not close, the module is not inserted correctly. Figure 2-40: Installing a memory module 6. Perform the post-installation procedures described on page 2-6. 2-35 HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...

  • Page 46: Pci Expansion Boards

    133 MHz PCI-X riser board 64-bit/133 MHz Supports a standard height/ PCI-X slot full-length 64-bit/ 133 MHz PCI-X riser board PCI Express x16 Supports a full-length PCI slot Express x16 riser board 2-36 HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...
  • Page 47 2. Disconnect all cables connecting an existing expansion board to the system board. 3. Remove the PCI riser board assembly: a. Loosen the two captive thumbscrews that secure the assembly to the chassis. b. Lift the assembly away from the chassis. 2-37 HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...
  • Page 48 Remove the two screws securing the riser board to the assembly. b. Pull the riser board away from the assembly. c. Remove the spare screw located on the third tab of the assembly (from the slot cover side). 2-38 HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...
  • Page 49 PCI retainer bracket located on the system board. : 5. Perform the post-installation procedures described on page 2-6. 2-39 HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...
  • Page 50 3. Perform the post-installation procedures described on page 2-6. Installing a PCI Expansion Board Guidelines for Installing PCI Expansion Boards The system supports up to two expansion boards at a time. Use only HP supported expansion boards that meet the following specifications: •...

  • Page 51: System Battery

    5 to 10 years. WARNING: Note the following reminders when replacing the system battery. • Replace the battery with the same type as the battery recommended by HP. Use of another battery may present a risk of fire or explosion. •...
  • Page 52 Ensure the spring latch is in place, and that it holds the battery firmly. Figure 2-48: Replacing the battery 4. Perform the post-installation procedures described on page 2-6. 2-42 HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...

  • Page 53: System Fans

    Figure 2-49: System fans System Fan Connections Figure 2-50 and Table 2-2 identifies the system fans by their device number and shows their corresponding cable connectors. Figure 2-50: System fan connections 2-43 HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...
  • Page 54 Tug the fan cable upward to release the fan from its bracket, then pull the fan away from the bracket. Figure 2-50: Removing a system fan from the chassis 2-44 HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...
  • Page 55 Figure 2-51: Installing a new system fan 5. Perform the post-installation procedures described on page 2-6. 2-45 HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...

  • Page 56: Power Supply Unit (Psu)

    Remove the PSU mounting screw located between the PSU fans. c. Remove the two PSU mounting screws located in the rear panel. d. Lift the PSU away from the chassis. 2-46 HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...
  • Page 57 7 ± 1 is set for the system. a. Position the new PSU in the PSU section of the chassis. b. Insert the PSU mounting screw located between the PSU fans. 2-47 HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...
  • Page 58 PSU. Figure 2-54: Installing a PSU 4. Perform the post-installation procedures described on page 2-6. 2-48 HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...

  • Page 59: Diagnostic Tools

    All manuals and user guides at all-guides.com Diagnostic Tools This chapter gives an overview of the diagnostics tools supported by HP ProLiant DL145 Generation 2 server. It also describes the basics of using PhoenixBIOS Software. Overview of Available Diagnostic Tools The following utilities assist in diagnosing problems, testing hardware, and monitoring and managing server operations.

  • Page 60: Phoenixbios Software

    Note: For more information about the diagnostic tools described in this table, and other tools available for your server, refer to the Servers Troubleshooting Guide located inside the HP ProLiant DL145 Generation 2 Server Support CD. For the most recent version of this guide, go to www.hp.com.

  • Page 61: Phoenixbios Setup Utility

    POST uses these values to configure the hardware. If the values and the actual hardware do not agree, POST generates an error message. You must run this utility to change the BIOS settings from the default or current configuration. HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...
  • Page 62 The first page to be displayed will be the Main menu showing the Setup Utility’s menu bar. Use the left (←) and right (→) arrow keys to move between selections on the menu bar. Figure 3-1: Setup Utility’s Main menu HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...
  • Page 63 The General Help window describes other Setup navigation keys that are not displayed on the legend bar. Press to load default system values. Press to save changes and close the Setup Utility. HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...
  • Page 64 CAUTION: Be cautious in setting field values in this menu as any incorrect value may cause the system to malfunction. Note: The SATA RAID option will be available in future release of the PhoenixBIOS. Visit our HP website for updates on the BIOS with this feature enabled.
  • Page 65 Save Changes - Saves all changes made to the Setup Utility. Note: A USB CD-ROM drive connected to the server will not be considered a bootable device. It will not be displayed in the Boot menu. HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...
  • Page 66 4. Press F10 to save the changes you made and close the Setup Utility. 5. Reboot the server. The diagnostic screen is displayed briefly at the end of POST. Figure 3-2: System Summary Screen HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...
  • Page 67 NOTE: A Supervisor password should be set first before a User password can be defined. 1. In the Security menu screen, select a set password field—Set User Password or Set Supervisor Password, then press Enter. Figure 3-3: Setup window for setting a system password HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...
  • Page 68 3. Press Enter twice without entering anything in the new and confirm password fields. 4. Press F10 to save the changes you made and close the Setup Utility. Setup automatically sets the selected password field to Clear. 3-10 HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...
  • Page 69 Clearing the CMOS data remove all system passwords. The clear CMOS switch is switch 2 of the system configuration switch (SW1). Refer to page 4-7 for the location of this switch. HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide 3-11...

  • Page 70: Power-On Self Test (Post)

    POST Error Indicators When POST detects a system failure, it either: • Displays a POST error message, or • Emits a series of beep codes 3-12 HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...
  • Page 71 If your system displays one of the messages marked below with an asterisk (*), write down the code and message and contact your HP Customer Support provider. When no POST error message is displayed but the server stops during POST, listen for beep codes.
  • Page 72 Load the system default values following the procedures on page 3-11. • Access Setup and enter your own custom values. If the error persists, check the system battery or contact your HP Customer Support provider. 0260 System timer error * The timer test failed.
  • Page 73 1. Turn off the server by pressing the power button for five seconds or more. 2. Restart the server by pressing the power button. 3. Listen for the signal again. HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide 3-15...
  • Page 74 Restore processor control word during warm boot Initialize PCI bus mastering devices Initialize keyboard controller 1-2-2-3 BIOS ROM checksum Initialize cache before memory auto size 8254 timer initialization 8237 DMA controller initialization continued 3-16 HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...
  • Page 75 Initialize all video adapters in system Quiet boot start (optional) Shadow video BIOS ROM Display BIOS copyright notice Initialize multi-boot Display processor type and speed Initialize EISA board Test keyboard continued HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide 3-17...
  • Page 76 Late POST device initialization Detect and install external RS232 ports Configure non-MCD IDE controllers Detect and install external parallel ports Initialize PC-compatible PnP ISA devices Re-initialize onboard I/O ports. continued 3-18 HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...
  • Page 77 Scan for F2 key stroke Enter Setup Clear boot flag Check for errors Inform ROM pilot about the end of POST. POST done, prepare to boot operating system continued HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide 3-19...
  • Page 78 Re-map I/O and memory for PCMCIA Initialize digitizer and display message Unknown interrupt The following are for boot block in flash ROM. Initialize the chipset Initialize the bridge Initialize the processor continued 3-20 HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...
  • Page 79 System memory test Initialize interrupt vectors Initialize runtime clock Initialize video Initialize System Management Manager (SSM) Output one beep Clear huge segment Boot to mini DOS Boot to full DOS HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide 3-21...
  • Page 80 7. Remove all accessories, except the primary boot hard disk drive. 8. Repeat steps 4 and 5. If the server now works, replace the boards and accessories one at a time to determine which one is causing the problem. 3-22 HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...

  • Page 81: Connectors, Switches, And Leds

    This chapter contains illustrations and tables identifying and describing the connectors, switches, buttons, and LED indicators located on the front panel, rear panel, system board, front panel board and hard drives of the HP ProLiant DL145 Generation 2 server. Connectors and Components This section contains illustrations and tables identifying connectors and components on the server’s front and rear panels, as well as those located on the system and front panel boards.

  • Page 82: Front Panel Components

    Power status LED indicator (green/amber) • Powers up the server. • Places the server in standby mode. • Powers down the server. Thumbscrews for the front bezel USB 2.0 ports HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...

  • Page 83: Rear Panel Components

    PS/2 keyboard port (purple) PS/2 mouse port (green) 10/100 Mbps LAN port for IPMI management (RJ-45) Note: The three LAN ports each has its own LED indicators for activity/link status and network speed. HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...

  • Page 84: System Board Components

    Figure 4-3: System board components Table 4-3: System Board Components Item Component Code Component 10/100 Mbps LAN port for IPMI management PS/2 mouse port PS/2 keyboard port CN13 Serial port Video port continued HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...
  • Page 85 NVIDIA Crush K8-04 Professional MCP (Media and Communications Processor) CN27 IDE data cable connector BIOS flash EEPROM (Electrically Erasable Programmable Read-Only Memory) BUZ1 Internal speaker AMD-8132 HyperTransport PCI-X 2.0 tunnel CN25 LPC debug connector continued HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...
  • Page 86 NOTE: Use of the NMI switch is not supported in all NOS. As of the present, NMI implementation is not available for systems running on Solaris and Linux operating systems. HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...

  • Page 87: Front Panel Board Components

    Figure 4-6 and Table 4-5 show and describe the components on the server’s front panel board. This board is linked to the system board through the front panel board connector (CN26). Figure 4-6: Front panel board components HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...
  • Page 88 4-pin system fan connectors Front Panel Board Cable Routing Figure 4-7 and Table 4-6 show the routing of the cables connected to the front panel board. Figure 4-7: Front panel board cable routing HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...
  • Page 89 Refer to Figure 2-50 on page 2-44 for an illustration of the system fan cable connections. 9. Perform the post-installation procedures described on page 4-6. HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...

  • Page 90: Status Led Indicators

    Figure 4-8: Front panel LED indicators Table 4-7: Front Panel LED Indicators Status Item Icon Component Status Description UID LED indicator Blue A UID button has been pressed (recessed underneath the UID button) continued 4-10 HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...
  • Page 91 The server has AC power and is indicator (recessed powered on. underneath the power Amber The server has AC power and is in button) standby mode. The server is powered off (AC power disconnected). HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide 4-11...

  • Page 92: Rear Panel Led Indicators

    No network link exists. 10/100 Mbps LAN port Activity status LED Flashing Network activity exists. indicator for the green 10/100 Mbps LAN port No network activity exists. 4-12 HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...

  • Page 93: System Board Led Indicators

    LED2 BMC heartbeat LED BMC is functional. indicator LED5 to LED12 POST (Power-On Self On/Off Indicate the status of the Test) LED indicators ongoing POST routine. (green) HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide 4-13...

  • Page 94: Physical And Operating Specifications

    All manuals and user guides at all-guides.com Physical and Operating Specifications This chapter provides physical and operating specifications for the HP ProLiant DL145 Generation 2 server. The specifications for the following items are provided: • System unit • Memory •...

  • Page 95: System Unit

    Standard height/full-length 64-bit/133 MHz PCI-X riser board Users have the option to replace this riser board with a PCI Express x16 model using the PCI Express riser board option kit. continued HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...
  • Page 96 • Thermal solution Five system fans for the memory modules and processors • One system fan for the PCI slots and system chipsets • Two PSU fans HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...
  • Page 97 Note: Operating temperature has an altitude derating of 1°C per 300 M to 3000 M. Table 5-4: Power Supply Requirements Item Description Model Delta DPS-500GB H PSU type 1U 500-watts Input type continued HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...

  • Page 98: Memory

    The server’s two 940-pin processor sockets support single- and dual-core AMD Opteron processors in the ceramic Micro Pin Grid Array (mPGA) package. • Operating frequency: 1.8, 2.0, 2.2, 2.4, 2.6, and 2.8 GHz • Process Technology: 130 nm SOI (silicon-on-insulator) HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...

  • Page 99: Ide Cd-Rom Drive

    16.6 MB/s Access times (typical) Full stroke 300 ms Random 140 ms 1.6 µm Track pitch Cache/buffer 128 KB Startup time <10s Stop time Single session <4s Multi-session <30s continued HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...

  • Page 100: Non-Hot-Plug Hard Drives

    Maximum transfer rate 320 MB/s 320 MB/s (synchronous) Physical configuration Bytes per sector Logical blocks 71,132,000 142,264,000 Operating temperature 10° to 35°C (50° to 95°F) 10° to 35°C (50° to 95°F) HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...

  • Page 101: Sata Hard Drive

    Physical configuration Bytes per sector Logical blocks 156,301,488 312,581,808 488,397,168 Operating temperature 5° to 55°C (41° to 131°F) 5° to 55°C (41° to 131°F) 5° to 55°C (41° to 131°F) HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...

  • Page 102: Sata And Ultra Ata/133 Controller

    Media interface controller (MAC) Triple speed, IEEE 802.3 compliant System interface Single lane 4-pin PCI-X Connector RJ-45 • Industry-compliant manageability IPMI 1.5 support features • Standards-compliant WOL Package 15 x 15 mm HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...

  • Page 103: Index

    User Diagnostics 3-1 DIMM slots 2-33 power button 4-2 UID button, front 4-2 DIMM specifications UID button, rear 4-3 size 5-5 speed 5-5 type 5-5 dip switch See system configuration switch HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide Index-1...
  • Page 104 I/O subsystem 5-2 media storage 5-3 memory 5-3 General Help window 3-5 power supply unit 5-3 GPU, location 4-6 processor 5-2 Graphics Processor Unit See GPU, location processor socket 5-2 Index-2 HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...
  • Page 105 2-14 memory bank 2-33 memory module 2-33 memory controller 5-2 PCI expansion boards 2-40 memory dump 4-6 processor 2-27 Integrated Ultra ATA/133 controller, specifications 5-9 HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide Index-3...
  • Page 106 2-36 installing 2-11 PCI expansion slots part numbers 1-4 PCI-X riser board 2-37 system board 2-36 PCI Express riser board installing 2-38 option 2-37 part number 1-4 Index-4 HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...
  • Page 107 5-4 POST part number 1-5 replacement warnings 2-46 beep codes 3-15 error indicators 3-12 replacing 2-46 errors messages 3-13 specifications 5-4 type 5-3 LED indicators 4-13 non-fatal errors 3-13 HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide Index-5...
  • Page 108 1-5 center wall 2-43 specifications device number 2-43 environmental 5-4 location 2-43 Gigabit Ethernet controller 5-9 part number 1-3 hardware 5-2 replacing 2-44 IDE CD-ROM drive 5-6 system health Index-6 HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide...
  • Page 109 2-2 thermal interface material 2-31 weight thermal solution 5-3 equipment symbol 2-3 top cover server specification 5-4 reinstalling 2-7 width 5-4 removing 2-7 WOL 3-7 work area recommendations 2-4 HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide Index-7...

Table of Contents