Lenovo RackSwitch G8296 Quick Start Manual page 15

Onie for lenovo network operating system

Hide thumbs Also See for RackSwitch G8296:

Table of Contents

6. To check if the ONIE image was successfully installed on the switch, use the

following command:

Following is an example using the cp tftp command:

G8296# cp tftp tftp://10.72.97.98/onie-img/G8296-CNOS-10.2.1.0_ONIE.imgs

system-image onie vrf management

Confirm download operation? (y/n) [n] y

Download in progress

...

Copy Success

Install image...This takes about 90 seconds. Please wait

Valid image detected.

Check image signature succeeded

Extracting image: 100%

Installing ONIE:

Updating flash: 100%

Updating ONIE eeprom with manufacturing fields...

ONIE image installation succeeded.

ONIE image now contains Software Version 10.2.1.0

G8296# display boot

Current FLASH software:

active image: version 10.2.1.0

standby image: empty

Uboot: version 10.2.1.0

ONIE: version 10.2.1.0

Currently set to boot software active image

Currently scheduled reboot time: none

Current port mode: default mode

In the command output, the current ONIE image installed on the switch is

displayed under the Current FLASH software section.

ONIE on the G8296

Table of Contents