Related Manuals for D-Link DI-724U
Summary of Contents for D-Link DI-724U
- Page 2 System Requirements DI-724U Install Guide D-Link Systems, Inc.
-
Page 3: Hardware Overview
A solid light indicates a proper connection to the proper power supply. Status LED A blinking light indicates that the DI-724U is functioning properly. WLAN LED A solid light indicates that the wireless segment is ready.This LED blinks during wireless data transmission. - Page 4 Ethernet-enabled computers. WAN PORT This is for the connection of an Ethernet cable to your Cable or DSL modem. Reset Button Pressing this button restores the Router to its original factory default settings. DI-724U Install Guide Power Receptor D-Link Systems, Inc.
- Page 5 QoS Router To Your Network First, connect the power adapter to the receptor at the back panel of the DI-724U and then plug the other end of the power adapter to a wall outlet or power strip. The Power LED will turn ON to indicate proper operation.
-
Page 6: Getting Started
Connecting the DI-724U DI-724U Install Guide Getting Started Please remember that D-Link Wireless 108G devices are pre-configured to connect together, right out of the box, with their default settings. D-Link Systems, Inc. -
Page 7: Using The Setup Wizard
DI-724U Install Guide Using The Setup Wizard Open your Web browser andtype“http://192.168.0.1” into the URL address box. Then press the Enter or Return key. The logon screen will appear. Select “admin” from the usernamedropdownmenu and leave the password field blank. - Page 8 You will see the following screens: Next Click Set up your new password. You have the option to establish a password for the username “admin”. Next Click Choose your time zone from the drop down list. Next Click DI-724U Install Guide D-Link Systems, Inc.
- Page 9 DI-724U Install Guide Select your Internet Connection. You will be prompted to select the type of Internet connection for your router. If you are unsure of which setting to select, please contact your Internet Service Provider. Next Click If you selected...
- Page 10 DSL Internet service.) Enter in the username and password provided to you by your ISP. Next Click Please be sure to remove any existing PPPoE client software installed on your computers. Static DI-724U Install Guide D-Link Systems, Inc.
-
Page 11: Wireless Setup
Next Click If you wish to use encryption for your 802.11g network, the DI-724U is capable of two types of wireless encryption WEP and WPA. By default the encryption is disabled. You can change the encryption settings for more secure wireless communication. - Page 12 Your Setup is Complete DI-724U Install Guide Your Setup is Complete! Click Restart Test Internet Connection You will be returned to the Home tab. Close the web browser window and relaunch your Web browser (i.e., Internet Explorer or Netscape Navigator), to link to your favorite Web site to test your Internet connection.
- Page 13 DI-724U Install Guide Configure Wireless Settings Using WCN Wizard The WCN wizard will copy the wireless settings from the computer being used to access the router. This computer needs to be running Windows XP with Service Pack 2 installed, and needs to have already gone through the Wireless Network Setup Wizard.
- Page 14 Configure Now Using WCN DI-724U Install Guide Install Click After installing Active X, click the “Configure Now Using WCN” button again to launch this next screen. Reboot Click Click D-Link Systems, Inc.
- Page 15 DI-724U Install Guide Using The Printer Wizard Make sure your printer is connected to the USB port on the router. Run Printer Click Wizard Next Click The wizard will identify the make and model of your printer, as well as it’s status.
- Page 16 Using The Printer Wizard Click Next to run the Printer Setup application. Next Click Do not click Save. This application can only run when accessed from the router. Click Open Click DI-724U Install Guide D-Link Systems, Inc.
- Page 17 DI-724U Install Guide You may need to supply the drivers for your printer if they are not built into windows. Click Click Select the location of the driver files for your printer. Once the wizard has completed installing your printer, you will be prompted to print a test page to verify its functionality.
- Page 18 To connect to the network, make sure the network adapter in your computer is configured properly. Here’s how to configure the network adapter to obtain an IP address automatically for the DI-724U Wireless Broadband Router. Microsoft Windows XP: Go to Start > right click on My Network Places Properties >...
- Page 19 DI-724U Install Guide Apple Macintosh OS X: Go to the Apple Menu Click on System Preferences Network Click on Network Built-in Ethernet Select in the Show pull down menu Using DHCP Select in the Configure pull down menu The IP address information, the Subnet Mask, the Router’s...