Advertisement
Transparency Unit
The transparency unit (B12B813362) lets you scan transparent materials—35 mm
slides, filmstrips, and negatives, 4 × 5 inch film, medium format (120/220) film, and
nonstandard film sizes up to 12.2 × 16.5 inches (309 × 420 mm). To switch
from scanning transparent materials to ordinary paper documents, see page 52.
Note: The transparency unit is optional for the GA version of the Expression 10000XL. It
is included with the Photo version.
Unpacking the Transparency Unit
Make sure that all of the following items are included in the transparency unit box. If
any items are missing or damaged, contact your Epson dealer, or contact Epson at
(562) 276-4382 (in the United States) or (905) 709-3839 (in Canada). Keep all the
packing materials so you can use them for storage when you are not scanning
transparencies.
Transparency unit
(including reflective
Transparency guide
document mat)
Film holders
(two of each type)
Advertisement
Table of Contents
Related Manuals for Epson B12B813362
Summary of Contents for Epson B12B813362
-
Page 1: Transparency Unit
Make sure that all of the following items are included in the transparency unit box. If any items are missing or damaged, contact your Epson dealer, or contact Epson at (562) 276-4382 (in the United States) or (905) 709-3839 (in Canada). Keep all the packing materials so you can use them for storage when you are not scanning transparencies. -
Page 2: Installing The Transparency Unit
Installing the Transparency Unit 1. Make sure the scanner is turned off, then unplug the power cord from the scanner. 2. Fully open the scanner’s document cover, then lift it straight up. 3. Lower the transparency unit onto the scanner, so that the pins fit into the holes as shown. -
Page 3: Using The Transparency Unit
5. Close the transparency unit. 6. Connect the transparency unit cable to the scanner’s OPTION tighten its screws. Using the Transparency Unit Before using the transparency unit (TPU), you need to remove the reflective document mat and make sure the glass on both the document table and the TPU is clean. - Page 4 6. Place the transparency guide at the back edge of the document glass, so that its alignment pins fit into the holes as shown. Placing Standard Film Sizes on the Scanner Use the film holders that came with the transparency unit to scan 35 mm slides, filmstrips, and negatives, 4 ×...
- Page 5 2. Make sure the transparency guide is in place at the back edge of the document glass (see page 47). Then place the film holder on the document glass, aligning the arrow marks as shown. When scanning large numbers of images, you can place a second film holder on the scanner next to the first one.
- Page 6 If you’re using Professional Mode, follow these steps: 1. Open your imaging application, then choose the the application and select Note: If you are using Windows XP and choose WIA-EPSON Expression 10000XL, certain features won’t be available. The EPSON Scan dialog box opens.
- Page 7 If you’ve placed your film directly on the document glass, click the Manual focus , and then click If you’re using a non-Epson film holder, manually adjust the focus to the position specified for your holder, or click the adjust the focus position automatically.
- Page 8 13. When scanning completes, click images in your imaging application. Continuous auto exposure to go back to the default settings for Reset for more information about using these options. to exit EPSON Scan and view the scanned Close , click this Continuous Dust Removal...
- Page 9 Scanning Paper Documents If you want to scan an ordinary paper document while leaving the transparency unit installed, follow these steps. 1. Remove the transparency guide. 2. Insert the reflective document mat, top edge first, being careful to keep the mat’s white surface from getting caught under the frame of the TPU.