Futher information and explanations are available online: Table of contents 1 Safety .......... 4 9 Programmes ....... 26 1.1 General information.... 4 9.1 Automatic programmes.... 26 1.2 Intended use....... 4 9.2 Timed programmes .... 27 1.3 Restriction on user group... 4 10 Accessories...... 29 1.4 Safe installation ...... 5 1.5 Safe use ........ 7 11 Laundry........
Page 3
16 Troubleshooting....... 40 17 Transportation, storage and disposal ........ 45 17.1 Preparing the appliance for transportation ...... 45 17.2 Disposing of old appliance .. 45 18 Customer Service..... 46 18.1 Product number (E-Nr.) and production number (FD).. 46 19 Consumption values.... 47 20 Technical data ......
en Safety 1 Safety Observe the following safety instructions. 1.1 General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. 1.2 Intended use Only use this appliance: ¡...
Safety en 1.4 Safe installation Take note of the safety instructions when installing the appliance. WARNING ‒ Risk of electric shock! Improper installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Connect the appliance to a power supply with alternating cur- rent only via a properly installed socket with earthing.
Page 6
en Safety WARNING ‒ Risk of injury! The high weight of the appliance may result in injury when lifted. ▶ Do not lift the appliance on your own. If this appliance is not correctly installed in a washer-dryer stack, the installed appliance may fall. ▶...
Safety en ▶ Wear protective gloves when installing and transporting the ap- pliance. 1.5 Safe use WARNING ‒ Risk of electric shock! If the appliance or the power cord is damaged, this is dangerous. ▶ Never operate a damaged appliance. ▶ Never pull on the power cord to unplug the appliance. Always unplug the appliance at the mains.
Page 8
en Safety WARNING ‒ Risk of poisoning! Condensation water from this appliance is not suitable for drinking and may be contaminated with fluff. ▶ Do not drink or reuse the condensation water from the appli- ance. Detergents and care products may result in poisoning if con- sumed.
Safety en WARNING ‒ Risk of fire! If drying is interrupted early, the laundry is not cooled sufficiently and may ignite. ▶ Do not interrupt the drying programme early. ▶ If drying is interrupted early, remove the laundry immediately and spread it out. CAUTION ‒ Risk of injury! The covering plate may break if you stand on or climb onto the appliance.
Page 10
en Safety WARNING ‒ Risk of injury! The use of non-original spare parts and non-original accessories is dangerous. ▶ Only use the manufacturer's original spare parts and original ac- cessories. WARNING ‒ Risk of poisoning! Poisonous fumes may be given off if you use cleaning agents that contain solvents.
Preventing material damage en Foam and foam rubber may deform 2 Preventing material or melt during the drying process. Do not dry laundry that contains damage ▶ foam or foam rubber. Unsuitable cleaning products may Follow these instructions to avoid ma- damage the surfaces of the appli- terial damage and damage to the ap- ance.
en Installation and connection Spin the laundry in the washing ma- 4 Installation and con- chine before drying. nection a If the laundry is excessively damp, this extends the programme dura- tion and increases energy con- 4.1 Unpacking the appliance sumption. ATTENTION! Observe the programme's maximum Objects remaining in the drum that load capacity.
Installation and connection en Replace the accessories in ques- If the appliance is operated immedi- ▶ tion before operating the appli- ately after transportation, the refriger- ance. ant contained in the appliance may → "Accessories", Page 29 result in damage to the appliance. Immediately after transporting the ▶...
en Installation and connection hose to drain away excess condens- Installation loca- Requirements ation directly into the waste water tion system. In a washer-dryer Only use the ori- Notes stack ginal connection ¡ Operate this appliance using the set from the water drain hose provided.
Page 15
Installation and connection en Pull out the condensation hose Push the water drain hose as far from the connecting piece. as it will go into the connecting piece. The condensation hose is connec- ted to the connecting piece at the Insert the water drain hose into the factory.
en Installation and connection Water outlet connection types Secure the elbow to the gully. ATTENTION! In the event of a blocked or covered outlet, accumulated wastewater can flow back into the appliance. Before operating the appliance, en- ▶ 4.5 Aligning the appliance sure that the wastewater drains away quickly and eliminate any In order to reduce vibrations and...
Familiarising yourself with your appliance en 5 Familiarising yourself with your appliance 5.1 Appliance You can find an overview of the parts of your appliance here. On certain models, specific details such as the colour and shape may differ from those pictured. Air inlet Door Maintenance flap on the base Condensation container...
en Familiarising yourself with your appliance 5.2 Control panel You can use the control panel to configure all functions of your appliance and to obtain information about the operating status. Programmes → Page 26 Programme selector → Page 30 Display → Page 19 Buttons → Page 22...
Display en 6 Display The display shows the current settings, options or relevant information. Example: Display Display Designation Description 0:40 Programme dura- Approximate expected programme dura- tion/programme tion or programme time remaining. time remaining 1:25 Timed programme The timed programme is set. → "Timed programmes", Page 27 8,0 kg Recommended...
en Display Display Designation Description (Iron Dry) Dryness level: Iron The dryness level is activated. → "Buttons", Page 23 (Cupboard Dryness level: The dryness level is activated. Dry) Cupboard Dry → "Buttons", Page 23 (Cupboard Dryness level: The dryness level is activated. Dry Plus) Cupboard Dry → "Buttons", Page 22 Plus Dryness level ad-...
Page 21
Display en Display Designation Description Anti-crease Programme status (Start/Re- Pause Programme status load) End of pro- Programme status gramme Example...
Page 22
en Buttons 7 Buttons Below is an overview of the buttons and their setting options. Button Selection Description Start/Reload ¡ Start Start, cancel or pause the programme. ¡ Cancel ¡ Pause 3 sec. ¡ Activate Activate or deactivate the childproof lock. ¡ Deactivate Disable the control panel to prevent unwanted or accidental operation.
Page 23
Buttons en Button Selection Description Cupboard Dry ¡ Cupboard Dry ¡ Selecting Cupboard Dry activates the dry- ¡ +1 ness level. ¡ +2 The dryness level ¡ +3 defines how damp or dry the laundry is after the programme ends. → "Dryness level", Page 25 ¡...
Page 24
en Buttons Button Selection Description Finish in ¡ Programme end ¡ Set the programme end. ¡ Programme length The programme dura- tion is already in- cluded in the set num- ber of hours. Once the programme has started, the pro- gramme duration is displayed.
Dryness level en 8 Dryness level Each automatic programme has a specified dryness level. The dryness level defines how dry or damp your laundry is after the programme ends. Dryness level Laundry Drying result Cupboard Dry Multi-layered, thick laundry The laundry is dry. Plus that does not dry readily.
en Programmes 9 Programmes You can dry your fabrics using either an automatic programme or a timed pro- gramme. 9.1 Automatic programmes Automatic programmes are pro- Tips grammes in which humidity sensors ¡ Select the dryness level according measure the residual moisture in the to the type of fabric or the desired laundry during the drying cycle.
Programmes en Programme Description Max. load (kg) Hygiene Plus Dry hard-wearing, heat-resistant fabrics made of cotton or linen. Note: Particularly suitable for strict hy- giene requirements. Sportswear Dry self-drying sportswear made of per- formance fibres, microfibres and synthet- ics. Shirts Suitable for shirts and blouses made of cotton, linen, synthetics or blended fab- rics.
Page 28
en Programmes Timed program Description Max. load (kg) Timed Program Warm Dry all types of fabric except for wool and silk. Suitable for pre-dried or slightly damp laundry and for drying off multi-layered, thick laundry.
Page 29
Accessories en 10 Accessories Use original accessories. These have been made especially for your appli- ance. Note: Some accessories are avail- able in other colours. Contact → "Customer Service", Page 46. Order number Connection kit To save space, stack the WTZ27410 appliance on a suitable washing machine of the same width and depth and that is from the...
QR code in the table of scanning the QR code in the table of contents or on www.bosch- contents or on www.bosch- home.com. home.com. 11.1 Preparing the laundry 12.1 Switching on the appli-...
operation en Remove the laundry. 12.4 Starting the programme Note: If you want to change the time 12.8 Switching off the appli- until the programme ends, set the ance "Ready in" time first. Turn the programme selector to Press Start/Reload. ▶ ▶ Off. a The display shows either the pro- gramme duration or the "Ready in"...
Page 32
en operation Remove the two-part fluff filter. Open the two fluff filters. Remove the fluff from the recess. Remove the fluff. Ensure that no fluff falls into the air Clean the two fluff filters thoroughly channel. under warm, running water and Disconnect the two-part fluff filter.
operation en Close the two fluff filters and put ¡ If you do not clean the appliance them together. as described, the appliance's func- tionality may be impaired. Requirement: The display shows the following during operation: Clean the fluff filter → Page 31. Open the base unit → Page 36. Carefully remove the filter mat from the retainers.
en operation Clean the filter mat thoroughly un- 12.11 Condensation con- der warm, running water and tainer squeeze it out by hand. Condensation forms during drying, which your appliance uses for auto- matic cleaning. By default, the con- densation is collected in the appli- ance's condensation container.
14 Basic settings You can configure the basic settings for your appliance to meet your needs. Note: You can find further information in the digital instruction manual by scanning the QR code in the table of contents or on www.bosch- home.com.
Note: You can find further information in the digital instruction manual by scanning the QR code in the table of contents or on www.bosch- home.com. If you place a cloth beneath the 15.1 Tips on cleaning and...
Page 37
Cleaning and servicing en Pull the insert out horizontally. Cleaning the base unit You can remove any visible dirt in the base unit. CAUTION Risk of cutting! Touching sharp edges on the heat exchanger may lead to cuts. Do not touch the fins on the heat ▶...
Page 38
en Cleaning and servicing Carefully clean the air inlet grille Closing the base unit with a vacuum cleaner and brush Requirement: The base unit is open. attachment. → "Opening the base unit", Page 36 Insert the heat exchanger cover by the handle. In doing so, ensure that you do not deform or damage the grille.
Cleaning and servicing en 15.3 Moisture sensor The moisture sensor in this appliance measures how damp the laundry is during the drying cycle. The appli- ance changes the duration of the automatic programme depending on the residual moisture in the laundry. Cleaning the moisture sensor Over time, residue from limescale, detergents and care products can build up on the moisture sensor.
en Troubleshooting 16 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶...
Page 41
Troubleshooting en Fault Cause and troubleshooting Creasing. The load is too large. Observe the maximum load capacity of the ▶ → "Programmes", Page 26. The laundry lies in the drum for too long after drying. Remove the laundry from the drum as soon as the drying programme has finished.
Page 42
en Troubleshooting Fault Cause and troubleshooting Condensation in the Ensure that the water drain hose is connected cor- ▶ condensation tank rectly. even though the water → "Connecting the water drain hose", Page 14 drain hose is connec- ted. The programme does Childproof lock is activated. not start.
Page 43
Troubleshooting en Fault Cause and troubleshooting The drying time is too Clean the heat exchanger. long. → "Cleaning the base unit", Page 37 → "Closing the base unit", Page 38. Water is leaking from Appliance is not correctly aligned. the appliance. → "Aligning the appliance", Page 16 ▶...
Page 44
en Troubleshooting Fault Cause and troubleshooting The laundry is too → "Cleaning the moisture sensor", Page 39. ▶ damp. The drying process is interrupted and the condensa- tion tank has been filled. → "Emptying the condensation container", Page 34. → "Inserting the condensation container", Page 35. → "Starting the programme", Page 31.
Transportation, storage and disposal en Secure the water drain hose on the 17 Transportation, stor- appliance against unintentional loosening. age and disposal Ensure that you do not bend the You can find out here how to prepare water drain hose. your appliance for transportation and Empty the condensation container storage.
en Customer Service Unplug the appliance from the Detailed information on the warranty mains. period and terms of warranty in your country is available from our after- Cut through the power cord. sales service, your retailer or on our Dispose of the appliance in an en- website.
Consumption values en 19 Consumption values Cottons Eco programme (de- The actual values may deviate from noted by the arrow symbol) is suit- the indicated values depending on able for drying cotton laundry with a the type of fabric, composition of normal dampness level, and is the laundry to be dried, residual moisture most efficient programme for drying in the fabric, set degree of dryness,...
Page 48
en Technical data Programme Final Load Spin Initial Pro- Energy mois- (kg) speed mois- gramm con- ture (rpm) ture e dura- sump- level level tion tion (h:min) (kWh/ cycle) Cottons + Iron Dry 12,0 1400 1:14 0,52 Cottons + Iron Dry 12,0 1000 2:12...
Technical data en ternatively, you can also find the model identifier in the first line of the EU energy label.
Page 52
Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service direct- ory.