Page 1
Operating instructions Dishwasher Always read the operating instructions and the installation sheet before setting up, installing, and commissioning the appliance. This prevents both personal injury and damage to the machine. en-CA HG07 M.-Nr. 11 848 190...
Contents Warnings and safety instructions ..............Notes on the operating instructions ..............15 Notes on the layout ..................... 15 Items included ....................16 Guide to the appliance ..................17 Machine overview....................17 Control field ......................18 Caring for the environment ................19 Initial commissioning ..................
Page 4
Contents Unloading the dishwasher................... 38 Interrupting a program..................39 Cancelling or changing a program ..............39 Options ....................... 40 Timer ......................40 Program overview ..................... 42 Program options ....................44 Express......................44 Buzzers........................ 45 Turning off the refill reminders ................46 Extra clean......................
Page 5
Contents Installation......................72 The Miele Waterproof System ................72 Water intake ......................72 Water drainage ....................74 Electrical connection ................... 76 Sound emission testing ..................78...
Miele cannot be held liable for injury or damage caused by non- compliance with these instructions. Keep the installation sheet and the operating instructions in a safe...
Page 7
Warnings and safety instructions Correct application This dishwasher is intended for use in domestic households and similar residential environments. This dishwasher is not suitable for outdoor use. This dishwasher is intended for use at altitudes of up to 4,000 m above sea level.
Page 8
Warnings and safety instructions Safety with children Children under 8 years of age must be kept away from the dishwasher unless they are constantly supervised. Children aged 8 and older may only use the dishwasher without supervision if they have been shown how to use it in a safe manner. Children must be able to understand and recognize the possible dangers caused by incorrect operation.
Page 9
It is most important that this basic safety requirement is fulfilled. If in doubt, the electrical installation should be checked by a qualified electrician. Miele cannot be held liable for the consequences of an inadequate or lack of grounding system (e.g., electric shock). ...
Page 10
Warnings and safety instructions Ensure that the connection data on the dishwasher’s data plate (fuse rating, frequency, and voltage) match the domestic electricity supply. This data must correspond in order to avoid the risk of damage to the dishwasher. Compare these before connecting the appliance to the electricity supply.
Page 11
The manufacturer’s warranty will be invalidated if the appliance is not repaired by a Miele authorized service technician. We recommend replacing defective components with original spare parts. If original Miele spare parts are installed correctly, Miele ensures full compliance with safety requirements and the warranty remains valid. ...
Page 12
If the power cable is damaged, it must only be replaced with a specific cable of the same type (available from Miele Service). For safety reasons, this must only be done by Miele Service or a service technician authorized by Miele.
Page 13
Warnings and safety instructions Correct use Do not use solvents in the wash cabinet. There is a danger of explosion. Dishwasher detergents can cause burning on the skin and in the eyes, nose, mouth, and throat. Avoid contact with detergents. Do not inhale powder detergents.
Page 14
Accessories and spare parts Only use original Miele accessories. If other parts are used, warranty, performance, and, if applicable, product liability claims will be invalidated. ...
Notes on the operating instructions Additional information and Notes on the layout comments Warnings Additional information and comments are contained in a narrow frame. Information which is important for safety is highlighted in a thick Instructions for the user framed box with a warning symbol.
Items included The following items are supplied: - dishwasher - operating instructions for operating the dishwasher - installation sheet for installing the dishwasher - other installation accessories for installing the dishwasher (see installation sheet) - funnel for filling the reactivation salt - additional printed matter and add- ons if required...
Guide to the appliance Machine overview a Top spray arm f Lower spray arm b Cutlery tray (depending on model) g Filter combination c Upper basket (depending on model) h Data plate d Middle spray arm i Rinse aid reservoir e Aeration valve j Detergent compartment...
Guide to the appliance Control field 65 C 65 C ° ° Auto 75 C 75 C ° ° 45 C 45 C ° ° a Program selection Normal = Normal Pots = Pots & pans Quick = QuickIntenseWash Sani = SaniWash Rinse = Rinse &...
Consult with local authorities, dealers or Miele in order to dispose of and recycle electrical and electronic appliances. Miele assumes no responsibility for deleting any personal data left on the appliance being disposed.
Initial commissioning Closing the door Every dishwasher is tested at the factory. There will be residual water in Push the baskets in. the machine from this test. It is not an Push the door until it clicks shut. indication that the dishwasher has been used previously.
Initial commissioning Rinse aid If you only ever wish to use combination detergent products in Rinse aid is necessary to ensure water your dishwasher, you do not need to does not cling and leave marks on add rinse aid. dishware during the drying phase and However, for optimum rinsing and helps dishware dry faster after it has drying results, use dishwasher...
Initial commissioning Adding rinse aid Close the lid firmly until you hear it click into place. Otherwise, water can enter the rinse aid reservoir during a program. Wipe up any spilled rinse aid. This prevents over-foaming occurring during the next program. Filling the rinse aid reservoir When the refill reminder Rinse aid appears in the display, the reservoir...
Page 23
Initial commissioning Open the door. Setting the rinse aid dosage You can adjust the rinse aid dosage for Turn the dishwasher off with the best results. button, if it is turned on. The rinse aid dosage can be set from 0 ...
Caring for the environment - You can connect the dishwasher to a Energy-saving dishwashing hot water supply. A hot water This dishwasher is exceptionally connection is particularly suitable economical in its use of water and with energy-saving water heating electricity. sources, such as solar energy with a For best results, follow these tips: circulation system.
Loading the dishwasher - The spray arms must not be blocked General information by items which are too tall or hang Remove coarse food residues from through the baskets. Test for free dishware. movement by manually rotating the spray arms. There is no need to pre-rinse items under running water.
Page 26
Loading the dishwasher Wash items not suitable for Damage due to caustic alkaline dishwashers: detergents. - Wooden cutlery and dishware or Aluminum parts (e.g., the grease items with wooden parts. These may filters of ventilation hoods) can be discolour and fade. The glue used in damaged by caustic alkaline these items is not dishwasher-proof detergents.
Loading the dishwasher Loading the FlexCare Cup Rack Upper basket You can put cups, small bowls, and flat See “Loading examples” under dishware on the FlexCare Cup Rack. “Loading the dishwasher” for Glasses can be arranged along the cup examples of how to load dishware and rack so they sit securely during the cutlery.
Page 29
Loading the dishwasher Adjusting the FlexCare Cup Rack You can set the height and depth of the cup rack at 2 different levels so that it can accommodate larger cups and so that taller items can be placed underneath it. Pull the cup rack upwards and click it into the desired position (see arrow).
Loading the dishwasher To raise the upper basket: Adjusting the upper basket Lift the basket up until it clicks into In order to gain more space for taller place. items in the lower basket or upper basket, the upper basket can be To lower the upper basket: adjusted on 3 levels with 3/4 "...
Loading the dishwasher Lower basket Cutlery tray See “Loading examples” under See “Loading examples” under “Loading the dishwasher” for “Loading the dishwasher” for examples of how to load dishware and examples of how to load dishware and cutlery. cutlery. Arrange the cutlery in the cutlery tray Loading the lower basket as shown.
Detergent There are different types of detergent: Active ingredients - Powder and liquid gel detergents. Damage caused by using These detergents allow you to adjust unsuitable detergents. the amount dispensed according to Detergents that are not suitable for the amount of wash items and the domestic dishwashers can cause level of soiling.
Detergent Detergent dispensing Risk of chemical burns from detergent. The detergent compartment holds a Dishwasher detergents can cause maximum of 50 ml. burning on the skin and in the eyes, There are marks in the detergent nose, mouth, and throat. compartment to aid with dispensing: Avoid contact with detergents.
Detergent Adding detergent The detergent must not cause the detergent-compartment lid to get stuck. This can prevent the lid from opening during the program. Do not overfill the detergent compartment. Ensure that the detergent packaging is properly closed after use. This prevents the detergent from getting damp and clumping together.
Operation Turning on the dishwasher Selecting a program Turn on the water supply faucet if it is Choose your program according to the turned off. type of load and the degree of soiling. Open the door. The different programs and their uses are described under “Program ...
Operation Display of program cycle time Starting a program Start the program by closing the The cycle time of the program selected appears in hours and minutes in the door. display before the program begins. If Risk of scalding due to hot the door is opened during the program, water.
Operation End of program Energy management The buzzers might sound at the end of To save energy, the dishwasher will the program. switch off automatically 10 minutes after the last time a button is pressed or The program has ended when : after the end of a program.
Operation Turning off the dishwasher Unloading the dishwasher Open the door. Dishware tends to break and chip more easily when it is hot. Allow dishware to The dishwasher can be turned off at cool until it is comfortable enough to any time using the button.
Operation Interrupting a program Cancelling or changing a program A program will be interrupted as soon as the door is opened. If a program is cancelled, important After 4 seconds, the indicator light of program stages may be missed. the selected program and the time A program should only be cancelled display will flash.
Options Timer Activating the timer Open the door. You can set the start time of a program. The program start time can be delayed Turn the dishwasher on with the for between 30 minutes and 24 hours. button. With start time delays between ...
Page 41
Options Starting a program before the time After you have activated the timer, all for the timer has elapsed: the displays will turn off after a few minutes to save energy. A program can be started before the time for the timer has elapsed. Press the button to switch the time Proceed as follows: display back on again for a few...
Program overview Program When to use Program sequence Pre- Main Interim Final Drying wash wash rinse rinse °F/°C °F/°C Program for regular use to completely 140– 140– Normal wash a full load of normally soiled 158/60 149/60 dishes with the ability to adjust energy –70 –65...
Page 43
Program overview Consumption Duration Energy Water Cold water Hot water Gallons/Liters Cold water Hot water 50°F/10°C 120°F/49°C 50°F/10°C 120°F/49°C h:min h:min 1.01 1.15 3.2/12.1 3:02 2:44 1,20 0,70 11,0 2:42 2:35 0,90 0,45 10,5 2:14 2:02 1.00 1.10 2.6/10.0 1:12 0:58 0,65–1,15 0,40–0,65...
Program options Express Open the door. Turn the dishwasher on with the The Express program option reduces button. the program cycle time. The indicator light for the program In order to achieve optimum cleaning selected will flash. results, the temperature, and therefore the energy consumption, will increase ...
Program options Press the Program button 4 times. Buzzers The top left program indicator light will A sequence of buzzer tones will sound flash rapidly 4 times at intervals. at the end of the program or if there is a fault. The flashing sequence in the time display indicates whether the buzzers at The buzzers at the end of a program...
Program options Press the Program button 9 times. Turning off the refill reminders The top left program indicator light will If you only ever use combination flash rapidly 9 times at intervals. detergent products containing salt and rinse aid in your dishwasher, you can The flashing sequence in the time turn off both refill reminders if you wish.
Program options Press the Program button 10 times. Extra clean The top left program indicator light will You can choose this program option to emit 1 long flash at intervals. increase the cleaning performance of the programs. The flashing sequence in the time display indicates whether the If you activate this program option, the Extra clean program option is activated...
Program options Press the Program button 11 times. Extra Dry The top left program indicator light will You can select this program option in emit 1 long flash and 1 short flash at order to increase the program drying intervals. performance. The flashing sequence in the time If you activate this program option, the display indicates whether the Extra dry...
Program options Press the Program button 19 times. Factory default settings The top left program indicator light will If you have altered any settings, you emit 1 long flash and 9 short flash at can reset them back to the factory intervals.
All surfaces are susceptible to dishwasher cleaner (available from scratching. Contact with unsuitable Miele Service or Miele’s online store). cleaning agents can alter or Follow the instructions on the product discolour all surfaces. packaging.
Cleaning and care To avoid damage to the outer Cleaning the door and the door surface, do not use: seal - cleaning agents containing soda, The door seal and the sides of the ammonia, acid or chloride dishwasher door are not accessed and cleaned by the spray arm jets.
Cleaning and care Removing the cutlery tray (if present) Cleaning the spray arms In order to be able to remove the upper Particles of food can get stuck in the spray arm, you first have to remove the spray arm jets and bearings. The spray cutlery tray (if present).
Page 53
Cleaning and care Removing the upper spray arm Removing the lower spray arm Remove the lower basket. Push the upper spray arm upward to engage the inner ratchet. Then Rotate the screw thread of the lower unscrew the spray arm by rotating the spray arm anti-clockwise ...
Page 54
Cleaning and care Refitting the spray arms Inserting the cutlery tray (if present) Refit the upper spray arm and tighten Slide the cutlery tray back onto the it by hand. rails from the front. Refit the middle spray arm. ...
Cleaning and care Checking the filters in the Cleaning the filters wash cabinet Switch the dishwasher off. The filter combination in the base of the Remove the lower spray arm (see wash cabinet retains coarse soil from “Cleaning the spray arms” under the suds solution.
Page 56
Cleaning and care In order to clean the inside of the Rotate the screw thread clockwise filter, pull the microfilter on the plastic until the arrow in the viewing window ring downwards and away from the points to the lock symbol . filter combination.
Cleaning and care Cleaning the water intake filter A filter is incorporated in the screw thread to protect the water intake valve. If the filter is soiled, insufficient water flows into the wash cabinet. Risk of electric shock from voltage.
Cleaning and care Cleaning the drain pump If water remains in the wash cabinet after the end of a program, the water has not been pumped away. The drain pump may be blocked by foreign objects. These foreign objects are easy to remove.
Page 59
Cleaning and care Damage caused by incorrect cleaning. The components are delicate and can be damaged during cleaning. Take care when cleaning the drain pump. The drain pump (see arrow) is underneath the cover. Risk of injury from glass splinters.
The circuit breaker has tripped. Reset the circuit breaker (see data plate for the minimum fuse rating). If the circuit breaker trips again, contact Miele Service. The dishwasher is not switched on. Switch the dishwasher on with the button.
If the indicator lights flash again, there is a technical fault. Turn the dishwasher off. Close the faucet. Contact Miele Service. Fault : The Waterproof system has reacted. The drain pump may Turn the dishwasher off.
(see “Water drainage” under “Installation”). The dishwasher stops A technical fault has occurred. during a program. Turn the dishwasher off. Fault number 8 Close the faucet. appears in the time Contact Miele Service. display.
Frequently Asked Questions Water drainage fault Problem Possible cause and solution The dishwasher stops Before remedying the fault: during a program. Turn the dishwasher off. The alarm tone is Water drainage fault. sounding. There might be water in the wash cabinet. The /...
Frequently Asked Questions General dishwasher problems Problem Possible cause and solution The alarm tone is The safe mode of the dishwasher was activated. sounding. This takes place in the following instances: The indicator light of – if you do not close the door within 4 seconds of the selected program the last press of a button at program start and the time display will...
Frequently Asked Questions Noises Problem Possible cause and solution There is a knocking A spray arm is hitting the dishware. noise in the wash Carefully open the door and rearrange the cabinet. dishware that is obstructing the spray arm. There is a rattling noise Dishware is moving around in the wash cabinet.
Frequently Asked Questions Poor cleaning results Problem Possible cause and solution The dishware is not The dishware was not loaded correctly. clean. See notes under “Loading the dishwasher”. The program was not powerful enough. Select a more powerful program (see “Program overview”).
Page 67
Frequently Asked Questions Problem Possible cause and solution The dishware is not dry The rinse aid dosage is set too low or the rinse aid or glasses and cutlery reservoir is empty. are flecked. Replenish the reservoir, increase the dosage, or change the brand of rinse aid (see “Rinse aid”...
Page 68
Frequently Asked Questions Problem Possible cause and solution Plastic parts are Natural dyes, e.g., from carrots, tomatoes, or discoloured. ketchup may be the cause. The amount of detergent used or its bleaching effect was not sufficient to deal with natural dyes. ...
In the event of a fault which you cannot From March 1, 2021, information on remedy yourself, please contact your energy labelling and ecodesign Miele dealer or Miele Service. requirements will be available in the European Product Database (EPREL). Contact information for Miele Service...
These and many other useful products - Specially designed cap for accurate can be ordered directly from Miele’s and easy dispensing online store, Miele Service, or from your Miele dealer. Detergents You have chosen excellent quality and performance with your Miele dishwasher.
Page 71
Optional accessories Appliance care Miele cleaning and care products provide optimum care for your dishwasher. Dishwasher cleaner - For use with the Clean Machine program without detergent dispensing - Cleans the dishwasher effectively and thoroughly - Removes grease, bacteria, and...
The Miele Waterproof System cold or hot water (up to max. 65°C) Provided your dishwasher has been supplies. installed correctly, the Miele Waterproof We recommend connecting to a cold System will protect you from water water connection to reduce energy damage.
Page 73
*INSTALLATION* Installation A faucet with a ¾" male thread must be Risk of damage from leaking provided on site. If this type of faucet is water. not available, only a qualified installer The intake hose is under water may connect the dishwasher to the pressure.
*INSTALLATION* Installation Water drainage Lay the drain hose so that it does not kink and is not being subjected to The appliance drainage system has a pressure or tugged. non-return valve, which prevents dirty water from flowing back into the ...
Page 75
*INSTALLATION* Installation Venting the water drainage If the on-site drainage connection is situated lower than the guide path for the lower basket rollers in the open door, the drainage system must be vented. Otherwise, a siphoning effect during a program can cause the appliance to empty itself of water.
USA: 1-888-99-MIELE(64353) right side of the door. CDN: 1-800-565-6435 A damaged power cord must only be replaced with a genuine Miele cord Specifications by a Miele service technician. The dishwasher comes equipped with a 4 ft (1.2 m) power cord (measured from...
Page 77
*INSTALLATION* Installation Hardwired electrical connection Prior to making a hardwire It is possible to hardwire this appliance connection to the terminal, remove to an existing power cable. the powercord. Otherwise there will be a risk of electric shock from the ...
Sound emission testing Prerequisites for sound emission testing Load the dishwasher with 16 standard place settings and use the Normal program. Setup for sound emission testing The dishwasher must be set up according to the following specifications. Install the dishwasher into an analyzing unit. ...
Page 79
Sound emission testing Remove the protective film from the provided insulating strip (depending on model) . Stick the insulating strip onto the front top edge of the base board .
Page 83
Please have the model and serial number of your appliance available when contacting Customer Service. Canada Importer Miele Limited Headquarters and Miele Centre 161 Four Valley Drive Vaughan, ON L4K 4V8 www.miele.ca Customer Care Centre Phone: 800 565-6435 customercare@miele.ca Germany Manufacturer Miele &...