Table of Contents
Advertisement
If the power light is breathing white — The
computer is in standby or the display may not
be responding.
•
Press a key on the keyboard, move the
connected mouse or a finger on the touch
pad, or press the power button to resume
normal operation.
•
If the display is not responding, press the
power button until the computer turns off
and then turn it back on.
•
If the problem persists, contact Dell (see
"Contacting Dell" on page 87).
If you encounter interference that hinders
reception on your computer — An unwanted
signal is creating interference by interrupting
or blocking other signals. Some possible
causes of interference are:
•
Power, keyboard, and mouse extension
cables.
•
Too many devices connected to a
power strip.
•
Multiple power strips connected to the
same electrical outlet.
Memory Problems
If you receive an insufficient memory
message —
•
Save and close any open files and exit any
open programs you are not using to see if
that resolves the problem.
•
See the software documentation for
minimum memory requirements. If
necessary, install additional memory (see
the Service Manual at
support.dell.com/manuals).
•
Reseat the memory module(s) into the
connector(s) (see the Service Manual at
support.dell.com/manuals).
•
If the problem persists, contact Dell (see
"Contacting Dell" on page 87).
If you experience other memory problems —
•
Run Dell Diagnostics (see "Dell
Diagnostics" on page 67).
•
If the problem persists, contact Dell (see
"Contacting Dell" on page 87).
Solving Problems
61
Hide quick links:
Advertisement
Table of Contents
