Makita BO4900V Instruction Manual
Hide thumbs
Also See for BO4900V:
- User manual ,
- Instruction manual (45 pages) ,
- Parts breakdown (3 pages)
Related Manuals for Makita BO4900V
Summary of Contents for Makita BO4900V
- Page 1 INSTRUCTION MANUAL Finishing Sander BO4900V BO4900 BO4901 DOUBLE INSULATION Read before use.
-
Page 2: Specifications
The vibration total value (tri-axial vector sum) deter- on Waste Electric and Electronic mined according to EN62841: Equipment and its implementation in Model BO4900,BO4900V accordance with national law, electric Work mode : sanding metal plate equipment that have reached the end of... -
Page 3: General Power Tool Safety Warnings
Use personal protective equipment. Always wear eye General power tool safety warnings protection. Protective equipment such as a dust mask, non-skid safety shoes, hard hat or hearing protection used WARNING: for appropriate conditions will reduce personal injuries. Read all safety warnings, instruc- tions, illustrations and specifications provided with this Prevent unintentional starting. -
Page 4: Functional Description
Speed adjusting dial Ventilate your work area adequately when you perform sanding operations. For BO4900V only Some material contains chemicals which may be toxic. Take caution to prevent dust inhala- CAUTION: tion and skin contact. Follow material supplier safety data. - Page 5 ASSEMBLY CAUTION: • Always be sure that the tool is switched off and unplugged before carrying out any work on the tool. Installing or removing abrasive paper For conventional type of abrasive paper with pre-punched holes ► 1. Punch plate 2. Conventional type of abrasive paper without pre-punched holes (standard equipment): Turn the clamp lever counterclockwise.
- Page 6 Tighten the screws firmly to secure the pad. Installing paper dust bag (accessory) For BO4900, BO4900V only Place the paper dust bag on the paper dust bag holder with its front side upward. Insert the front fixing card- board of the paper dust bag into the groove of the paper ►...
-
Page 7: Operation
Emptying dust bag Connecting to vacuum cleaner When the dust bag is about half full, switch off and unplug the tool. Hold the tool and remove the dust bag from the dust nozzle while pressing the push button. When you wish to perform cleaner operation, connect a vacuum cleaner to your tool. -
Page 8: Maintenance
• These accessories or attachments are recom- unplugged before attempting to perform inspec- mended for use with your Makita tool specified in this tion or maintenance. manual. The use of any other accessories or attach- ments might present a risk of injury to persons. Only •...