D-Link E15 Quick Installation Manual
Ax1500 wi-fi 6 ai mesh range extender
Hide thumbs
Also See for E15:
- Quick installation manual (2 pages) ,
- Quick installation manual (103 pages)
Advertisement
Quick Links
Quick Installation Guide
E15
AX1500 Wi-Fi 6 AI Mesh Range Extender
INSTALLATION
OPTION 1
QUICK WPS SETUP
1
Plug the E15 into a power source near your wireless router. Wait for
the Status LED to flash orange.
/
2
Press the WPS button on your router for 3 seconds. Refer to your
router's manual for router behaviour.
/
3
Press the WPS button on your E15 for 3
/
seconds. The status LED should start to
flash white.
4
When the Status LED turns solid white
/
(may take up to 3 minutes), this indicates
that your E15 is connected to your
wireless router.
Your setup is complete! You can now unplug and move your device to
a location between your router and the area where you want wireless
coverage. By default, your device will share the same Wi-Fi name and
password as your router.
IMPORTANT
WPS may be disabled on some Routers or Modems. If the WPS Status
LED on your Router or Modem does not start blinking when you have
pressed the WPS button, try again and hold it a little longer. If it still
does not blink, STOP, and configure your E15 using
Option 2: D-Link Ai App Setup.
PACKAGE CONTENTS
•
E15 || AX1500 Wi-Fi 6 AI Mesh Range Extender
•
Ethernet Cable
•
Quick Installation Guide
•
Quick Installation Card
OPTION 2
D-LINK AI APP SETUP
1
Download the D-Link Ai app and launch it.
/
D-Link Ai
2
Tap Install New Device. Scan the Setup code on the Quick
Installation Card. Follow the on-screen instructions to complete
/
the setup.
D-Link Ai
Quick Installation Card
"D-Link Ai "
SETUP QR CODE
Model Name: DEVICE
Wi-Fi Name: dlink-XXXX
Password: XXXXXXXX
S/N: 123456789
Advertisement
Related Manuals for D-Link E15
Summary of Contents for D-Link E15
- Page 1 D-LINK AI APP SETUP Download the D-Link Ai app and launch it. Plug the E15 into a power source near your wireless router. Wait for the Status LED to flash orange. Press the WPS button on your router for 3 seconds. Refer to your router’s manual for router behaviour.
- Page 2 D-Link products. Customers can contact D-Link Technical or GNU Lesser General Public License (“LGPL”). As to the source code of such software, D-Link will applicable, the terms of the GPL and LGPL, and provide upon written request via email and/or Support through our website by choosing the relevant region.