hit counter script
Craftsman CMXECXA0220242 Instruction Manual

Craftsman CMXECXA0220242 Instruction Manual

Twin hot dog air compressor

Advertisement

TWIN HOT DOG AIR COMPRESSOR
COMPRESOR DE AIRE TWIN HOT DOG
COMPRESSEUR D'AIR TWIN HOT DOG
IF YOU HAVE QUESTIONS OR COMMENTS, CONTACT US.
POUR TOUTE QUESTION OU TOUT COMMENTAIRE, NOUS CONTACTER.
SI TIENE DUDAS O COMENTARIOS, CONTÁCTENOS.
1-888-899-0146
1-888-331-4569
INSTRUCTION MANUAL | GUIDE D'UTILISATION | MANUAL DE INSTRUCTIONES
WWW.CRAFTSMAN.COM
CMXECXA0220242

Advertisement

Table of Contents
loading

Summary of Contents for Craftsman CMXECXA0220242

  • Page 1 INSTRUCTION MANUAL | GUIDE D’UTILISATION | MANUAL DE INSTRUCTIONES TWIN HOT DOG AIR COMPRESSOR COMPRESOR DE AIRE TWIN HOT DOG COMPRESSEUR D’AIR TWIN HOT DOG CMXECXA0220242 IF YOU HAVE QUESTIONS OR COMMENTS, CONTACT US. POUR TOUTE QUESTION OU TOUT COMMENTAIRE, NOUS CONTACTER. SI TIENE DUDAS O COMENTARIOS, CONTÁCTENOS.
  • Page 2 To reduce the risk of injury, read the Handle instruction manual. If you have any questions or comments about this or any product, call toll free at:1-888-899-0146. If you would like more information about other Craftsman products, call CRAFTSMAN toll free at:1-888-331-4569.
  • Page 3: Air Compressor

    ENGLISH Air Compressor CMXECXA0220242 SAVE ALL WARNINGS AND DANGER: RISK TO BREATHING (Asphyxiation) INSTRUCTIONS FOR FUTURE REFERENCE What can happen How to prevent it WARNING: This product can expose you to The compressed air directly from Air obtained directly from the...
  • Page 4 ENGLISH What can happen How to prevent it Electrical Grounding: Failure Make certain that the electrical to provide adequate grounding to circuit to which the compressor Failure to properly drain condensed Drain air tank daily or after each this product could result in serious is connected provides proper water from air tank, causing rust use.
  • Page 5: Assembly And Adjustments

    ENGLISH Attempting to operate compressor Any repairs required on this Model CMXECXA0220242 with damaged or missing parts or product should be performed SCFM @ 40 psig 0.7 * attempting to repair compressor by authorized service with protective shrouds removed center personnel.
  • Page 6: Installation

    ENGLISH UNPACKING • gauge (AWG) or larger. (Wire size increases as gauge number decreases. AWG and AWG may also be used. DO NOT USE AWG.) INSTALLATION NOTICE: Risk of Property Damage. The use of an undersized extension cord will cause voltage to drop How To Set Up Your Unit resulting in power loss to the motor and overheating.
  • Page 7: Before Starting

    ENGLISH How to Use Your Unit (Fig. A, B) On(I)/Off(O) Switch: in the On(I) position to provide automatic power to the pressure switch How to Stop to “Off”. Pressure Switch (not shown): The pressure switch automatically starts the motor when the air tank pressure drops below the factory set “cut-in”...
  • Page 8: How To Start

    ENGLISH How to Start Fig. C to “On” and allow tank pressure to build. Motor will stop when tank pressure reaches clockwise to increase pressure MAINTENANCE WARNING: To reduce the risk of serious personal injury, turn unit off and disconnect it from power source before making any adjustments or removing/installing attachments or accessories.
  • Page 9 WARNING: To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment (including brush inspection and replacement, when applicable) should be performed by a CRAFTSMAN factory service center or a CRAFTSMAN authorized WARNING: Risk of Unsafe Operation. Unit cycles automatically when power is on. When servicing, you may be exposed to voltage sources, compressed air, or moving parts.
  • Page 10: Register Online

    If you are not completely satisfied with the performance of registration of ownership will serve as your proof your CRAFTSMAN Power Tool, Laser, or Nailer for any reason, you can return it within 90 days from the date of purchase •...
  • Page 11: Troubleshooting

    ENGLISH TROUBLESHOOTING WARNING: Risk of Unsafe Operation. Unit cycles automatically when power is on. When servicing, you may be exposed to voltage sources, compressed air, or moving parts. Before servicing unit unplug or disconnect PROBLEM CAUSE CORRECTION Excessive tank pressure - safety valve Pressure switch does not shut off...

Table of Contents