PARTS AND FEATURES PARTS AND ACCESSORIES Attachment hub Motor head Beater shaft Flat beater Speed control Bowl Wire whip Dough hook Flex Edge beater* Pouring shield* *Accessory sold separately 2 | PARTS AND FEATURES...
Return appliance to the nearest Authorized Service Facility for examination, repair or adjustment. 7. The use of accessories not recommended or sold by KitchenAid may cause fire, electric shock or injury. 8. Do not use the Stand Mixer outdoors.
STAND MIXER SAFETY 10. Do not let the cord contact hot surfaces, including the stove. 11. Remove the flat beater, wire whip, or spiral dough hook from the Stand Mixer before washing. SAVE THESE INSTRUCTIONS THIS PRODUCT IS DESIGNED FOR HOUSEHOLD USE ONLY. ELECTRICAL REQUIREMENTS Voltage: 120 V Frequency: 60 Hz...
NOTE: To move the speed control lever with ease, lift slightly up as you move it across the settings in either direction. FOR DETAILED INFORMATION ON USING THE STAND MIXER: Visit kitchenaid.com/quickstart for additional Instructions with videos, inspiring recipes, and tips on how to use your Stand Mixer. USING THE STAND MIXER | 5...
USING THE STAND MIXER ASSEMBLING THE STAND MIXER Raise the motor head: Slide the Check to be sure that the Stand locking lever to the unlock position Mixer is unplugged, and the speed and lift the motor head. Once lifted, control is turned to “0”.
Page 7
USING THE STAND MIXER ASSEMBLING THE STAND MIXER Lower the motor head: Slide the locking lever to the unlock position and guide the motor head down. Make sure motor head is completely down, then slide the locking lever to the lock position. Before mixing, test lock by attempting to raise motor head.
USING THE STAND MIXER OPERATING THE STAND MIXER NOTE: The Stand Mixer may warm up during use. Under heavy loads with extended mixing time, the top of the unit may become hot. This is normal. Plug the Stand Mixer into a grounded 3 prong outlet.
USING THE STAND MIXER NOTE: The pouring shield* can be used to avoid ingredients splashing out of the bowl when mixing as well as to easily pour ingredients in the bowl while mixing. (OPTIONAL) Pour ingredients into the bowl through the pouring chute. DISASSEMBLING THE STAND MIXER Raise the motor head: Check to be sure that the Stand Mixer is...
USING THE STAND MIXER OPTIONAL ATTACHMENTS KitchenAid offers a wide range of optional attachments such as the spiralizer, pasta cutters, or food grinder that may be attached to the Stand Mixer attachment power hub as shown here. Check to be sure that the Stand...
Do not store the wire whip on the shaft. FOR DETAILED INFORMATION ON CLEANING THE STAND MIXER: Visit kitchenaid.com/quickstart for additional Instructions with videos, inspiring recipes, and tips on how to use your Stand Mixer. *Accessory sold separately CARE AND CLEANING | 11...
TROUBLESHOOTING If your Stand Mixer should malfunction, please check the following: 1. The Stand Mixer may warm up during use. Under heavy loads with extended mixing time periods, you may not be able to comfortably touch the top of the unit. This is normal. 2.
IF THIS PRODUCT FAILS TO WORK AS WARRANTED, CUSTOMER’S SOLE AND EXCLUSIVE REMEDY SHALL BE REPAIR OR REPLACEMENT ACCORDING TO THE TERMS OF THIS LIMITED WARRANTY. KITCHENAID AND KITCHENAID CANADA DO NOT ASSUME ANY RESPONSIBILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. This warranty gives you specific legal rights and you may also have other rights which vary from state to state or province to province.