3-gallon 1.5 hp, 1 hp running oil lubricated air compressor (20 pages)
Summary of Contents for Craftsman CMXECXA0200141A
Page 1
INSTRUCTION MANUAL | GUIDE D’UTILISATION | MANUAL DE INSTRUCTIONES AIR COMPRESSOR COMPRESOR DE AIRE COMPRESSEUR D’AIR CMXECXA0200141A IF YOU HAVE QUESTIONS OR COMMENTS, CONTACT US. POUR TOUTE QUESTION OU TOUT COMMENTAIRE, NOUS CONTACTER. SI TIENE DUDAS O COMENTARIOS, CONTÁCTENOS. 1-888-899-0146 1-888-331-4569 WWW.CRAFTSMAN.COM...
Page 2
To reduce the risk of injury, read the Handle instruction manual. If you have any questions or comments about this or any product, call toll free at:1-888-899-0146. If you would like more information about other Craftsman products, call CRAFTSMAN toll free at:1-888-331-4569.
ENGLISH Air Compressor CMXECXA0200141A SAVE ALL WARNINGS AND DANGER: RISK TO BREATHING (Asphyxiation) INSTRUCTIONS FOR FUTURE REFERENCE What can happen How to prevent it WARNING: This product can expose you to The compressed air directly from Air obtained directly from the...
Page 4
ENGLISH What can happen How to prevent it Electrical Grounding: Failure Make certain that the electrical to provide adequate grounding to circuit to which the compressor Failure to properly drain condensed Drain air tank daily or after each this product could result in serious is connected provides proper water from air tank, causing rust use.
ENGLISH Attempting to operate compressor Any repairs required on this Model CMXECXA0200141A with damaged or missing parts or product should be performed SCFM @ 40 psig 2.2 * attempting to repair compressor by authorized service with protective shrouds removed center personnel.
ENGLISH UNPACKING • gauge (AWG) or larger. (Wire size increases as gauge number decreases. AWG and AWG may also be used. DO NOT USE AWG.) INSTALLATION NOTICE: Risk of Property Damage. The use of an undersized extension cord will cause voltage to drop How To Set Up Your Unit resulting in power loss to the motor and overheating.
ENGLISH How to Use Your Unit (Fig. A, B) On(I)/Off(O) Switch: in the On(I) position to provide automatic power to the pressure switch How to Stop to “Off”. Pressure Switch (not shown): The pressure switch automatically starts the motor when the air tank pressure drops below the factory set “cut-in”...
ENGLISH How to Start Fig. C to “On” and allow tank pressure to build. Motor will stop when tank pressure reaches clockwise to increase pressure MAINTENANCE WARNING: To reduce the risk of serious personal injury, turn unit off and disconnect it from power source before making any adjustments or removing/installing attachments or accessories.
Page 9
WARNING: To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment (including brush inspection and replacement, when applicable) should be performed by a CRAFTSMAN factory service center or a CRAFTSMAN authorized WARNING: Risk of Unsafe Operation. Unit cycles automatically when power is on. When servicing, you may be exposed to voltage sources, compressed air, or moving parts.
If you are not completely satisfied with the performance of registration of ownership will serve as your proof your CRAFTSMAN Power Tool, Laser, or Nailer for any reason, you can return it within 90 days from the date of purchase •...
ENGLISH TROUBLESHOOTING WARNING: Risk of Unsafe Operation. Unit cycles automatically when power is on. When servicing, you may be exposed to voltage sources, compressed air, or moving parts. Before servicing unit unplug or disconnect PROBLEM CAUSE CORRECTION Excessive tank pressure - safety valve Pressure switch does not shut off...