hit counter script

Advertisement

EEA12100L
EN
Dishwasher
User Manual

Advertisement

Table of Contents
loading

Summary of Contents for Electrolux EEA12100L

  • Page 1 EEA12100L Dishwasher User Manual...
  • Page 2: Table Of Contents

    12. TECHNICAL INFORMATION................. 23 WE’RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time.
  • Page 3 ENGLISH of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety This appliance can be used by children aged from 8 • years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a...
  • Page 4: Safety Instructions

    If the supply cord is damaged, it must be replaced by • the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard. Put the cutlery in the cutlery basket with the sharp •...
  • Page 5 ENGLISH • Do not pull the mains cable to • Do not remove the dishes from the disconnect the appliance. Always pull appliance until the programme is the mains plug. complete. Some detergent may • This appliance is fitted with a 13 A remain on the dishes.
  • Page 6: Product Description

    • Disconnect the appliance from the models. mains supply. • The following spare parts will be • Cut off the mains cable and discard it. available for 10 years after the model • Remove the door catch to prevent...
  • Page 7: Control Panel

    ENGLISH 4. CONTROL PANEL On/off button / Reset button Programme button Programme indicators Delay button Indicators 4.1 Indicators Indicator Description Drying phase indicator. It is on when you select a programme with the drying phase. It flashes when the drying phase operates. Salt indicator.
  • Page 8 Programme Type of load Degree of soil Programme phases • Crockery • Normal • Wash 60 °C • Cutlery • Lightly dried-on • Intermediate rinse • Pots • Final rinse 55 °C • Pans • Drying • AirDry • Crockery •...
  • Page 9: Settings

    ENGLISH 6. SETTINGS 6.1 Programme selection mode Press and hold the programme button until the appliance is in programme and user mode selection mode. When the appliance is in programme selection mode it is possible to set a How to enter user mode programme and to enter user mode.
  • Page 10 German de‐ French de‐ mmol/l Clarke de‐ Water softener grees (°dH) grees (°fH) grees level 4 - 10 7 - 18 0.7 - 1.8 5 - 12 <4 <7 <0.7 < 5 1) Factory setting. 2) Do not use salt at this level.
  • Page 11 ENGLISH The indicator shows the current How to set the water softener setting: level • is on = Rinse aid empty Make sure the appliance is in user mode. notification is on. • is off = Rinse aid empty 1. Wait until the indicator starts to notification is off.
  • Page 12: Before First Use

    How to activate the acoustic During the drying phase, the door opens automatically signal for the end of the and remains ajar. programme CAUTION! Make sure the appliance is in user mode. Do not try to close the 1. Press the programme button three appliance door within 2 times.
  • Page 13: Daily Use

    ENGLISH 7.1 The salt container 6. Turn the cap of the salt container clockwise to close the salt container. CAUTION! CAUTION! Use rough salt designed for Water and salt can come out dishwashers only. Fine salt of the salt container when increases the risk of you fill it.
  • Page 14 8.1 Using the detergent The indicator is on. 3. Close the appliance door to start the countdown. During the countdown, it is not possible to change the programme. When the countdown is complete, the programme starts. Opening the door while the...
  • Page 15: Hints And Tips

    ENGLISH The Auto Off function End of the programme This function decreases energy When the programme is complete, the consumption by deactivating Auto Off function switches the appliance automatically the appliance when it is not off. operating. Close the water tap. The function comes into operation: •...
  • Page 16: Care And Cleaning

    • Make sure that glasses do not touch Using too much rinse aid results in each other. bluish layers on the items. • Put light items in the upper basket. • Make sure that the water softener Make sure that the items do not move level is correct.
  • Page 17 ENGLISH 10.1 Cleaning the filters The filter system is made of 3 parts. 5. Make sure that there are no residues of food or soil in or around the edge of the sump. 6. Put back in place the flat filter (A). Make sure that it is correctly 1.
  • Page 18 10.2 Cleaning the lower spray installed in the duct (A) with the mounting elements (C). We recommend to clean the lower spray arm regularly to prevent soil from clogging the holes. Clogged holes can cause unsatisfactory washing results. 1. To remove the lower spray arm, pull it upwards.
  • Page 19: Troubleshooting

    ENGLISH • Do not use abrasive products, abrasive cleaning pads, sharp tools, strong chemicals, scourer or solvents. • Using short-duration programmes regularly can cause grease and limescale buildup inside the appliance. Run long-duration programmes at least twice a month to prevent the buildup.
  • Page 20 Problem and alarm code Possible cause and solution The programme does not start. • Make sure that the appliance door is closed. • If the delay start is set, cancel the setting or wait for the end of the countdown.
  • Page 21 ENGLISH Problem and alarm code Possible cause and solution Technical malfunction of the appli‐ • Switch the appliance off and on. ance. • The indicator flashes 12 times intermittently. • Acoustic signal sounds 12 times intermittently. The level of water inside the appli‐ •...
  • Page 22 WARNING! We do not recommend using the appliance until the problem has been completely fixed. Unplug the appliance and do not plug it in again until you are certain that it operates correctly. 11.1 The washing and drying results are not satisfactory...
  • Page 23: Technical Information

    ENGLISH Problem Possible cause and solution Traces of rust on cutlery. • There is too much salt in the water used for wash‐ ing. Refer to "The water softener". • Silver and stainless steel cutlery were placed to‐ gether. Avoid to put silver and stainless steel items close together.
  • Page 24 Capacity Place settings Power consumption Left-on mode (W) Off-mode (W) 0.50 1) Refer to the rating plate for other values. 2) If the hot water comes from alternative source of energy (e.g. solar panels), use the hot water supply to decrease energy consumption.
  • Page 28 www.electrolux.com/shop...

Table of Contents

Save PDF