Table of Contents
Advertisement
Initialization
You can reset the recorder to its original factory
settings and initialize the HDD or USB Memory.
[Factory Set] If you need to, you can reset the
recorder to all its factory settings. Some options
cannot be reset. (Rating, Password, and Area
Code)
[HDD format] Initializes the HDD (Hard Disk Drive):
everything recorded on the HDD will be erased.
[USB format] Initializes the USB device.: everything
recorded on the Memory will be erased.
1. Select [Initialization] option then press B.
2. Press v / V to select the desired option then press
ENTER.
The confirm message will appear.
3. Use b / B to select [Yes] or [No] then press
ENTER.
Language Settings
Display Menu
Select a language for the Setup menu and on-screen
display.
Disc Menu/Audio/Subtitle
[Original]Refers to the original language in which
the disc was recorded.
[Others] To select another language, press number
buttons then ENTER to enter the corresponding
4-digit number according to the language code list
in the reference chapter (see page 58). If you enter
the wrong language code, press CLEAR.
[OFF](for Disc Subtitle) : Turn off Subtitle.
22
Audio Settings
Dolby Digital
[Bitstream]: Select "Bitstream" when enjoying
original Dolby Digital Audio (Set to this mode
ordinary).
[PCM]: DVDs encoded in Dolby Digital will be
automatically downmixed to two-channel PCM audio
(refer to Audio Channel Selection on page 12).
DRC (Dynamic Range Control)
With the DVD format, you can hear a program's
soundtrack in the most accurate and realistic
presentation possible, thanks to digital audio
technology. However, you may wish to compress the
dynamic range of the audio output (the difference
between the loudest sounds and the quietest ones).
Then, you may listen to a movie at a lower volume
without losing clarity of sound. Set DRC to [ON] for
this effect.
Advertisement
Table of Contents
