Canon GP335 Service Manual page 424
Hide thumbs
Also See for GP335:
- Installation instructions (4 pages) ,
- Service manual (682 pages) ,
- Service handbook (200 pages)
Advertisement
CHAPTER 14 TROUBLESHOOTING
Image Leading Edge Margin
(REGIST; registration roller
1
activation timing)
Standard: 2.5 ±1.5 mm
For steps see the previous page.
C O P I E R > A D J U S T > F E E D - A D J >
REGIST
Figure 14-201
<Making Adjustments>
•
To increase the leading edge margin,
increase the setting of REGIST (thereby
delaying the activation of the registration
roller).
•
To decrease the leading edge margin,
decrease the setting of REGIST.
After adjusting the image leading edge
margin, be sure to make adjustments
under ADJUST>ADJ-XY>ADJ-X. (See
the descriptions for service mode.)
14-6
2.5 ± 1.5mm
COPYRIGHT © 1999 CANON INC. CANON 405/335 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
Adjusting the Left/Right
2
Registration (front)
a. Pick-Up from the Cassette
Check to see if the margin on the image
front is 2.5 ±1.5 mm for each cassette.
( )
( + )
2.5 –1.5mm
0
2
4
6
8
10
Figure 14-202
If it is not as indicated, perform the following:
1) Slide out the cassette in question.
2) Remove the two screws [1], and detach
the horizontal registration mount.
Horizontal registration mount
Figure 14-203
[1]
Advertisement
Chapters
Troubleshooting
