Associate Your Fingerprints With Passwords (For Selected Models); Fido (Fast Identity Online) Authentication - Lenovo ThinkPad X13 Gen 4 User Manual
Hide thumbs
Also See for ThinkPad X13 Gen 4:
- User manual (60 pages) ,
- Quick start manual (12 pages) ,
- Manual (10 pages)
Table of Contents
Advertisement
What to do if you forget your supervisor password
If you forget your supervisor password, there is no service procedure to remove the password. You have to
contact a Lenovo authorized service provider to have the system board replaced. A fee will be charged for
parts and service.
What to do if you forget your system management password
If you forget your system management password, do the following to remove the system management
password:
• If you have set a supervisor password and remember it:
1. Restart the computer. When the logo screen is displayed, immediately press F1.
2. Type the supervisor password to enter the UEFI BIOS menu.
3. Select Security ➙ Password ➙ System Management Password by using the arrow keys.
4. Type the current supervisor password in the Enter Current Password field. Then, leave the Enter
New Password field blank, and press Enter twice.
5. In the Changes have been saved window, press Enter.
6. Press F10 to save changes and exit the UEFI BIOS menu.
• If you have not set a supervisor password, contact a Lenovo authorized service provider to have the
system management password removed.
Associate your fingerprints with passwords (for selected models)
Do the following to associate your fingerprints with the power-on password and NVMe password:
1. Turn off and then turn on the computer.
2. When prompted, scan your finger on the fingerprint reader.
3. Enter your power-on password, NVMe password, or both as required. The association is established.
When you start the computer again, you can use your fingerprints to log in to the computer without entering
your Windows password, power-on password, or NVMe password. To change settings, press F1 to enter the
UEFI BIOS menu, and then select Security ➙ Fingerprint.
Attention: If you always use your fingerprint to log in to the computer, you might forget your passwords.
Write down your passwords, and keep them in a safe place.
FIDO (Fast Identity Online) authentication
Your computer supports FIDO (Fast Identity Online) authentication feature. This feature works as an
alternative to password-based authentication to achieve passwordless authentication. This feature only
works when a power-on password is set in UEFI BIOS and the FIDO2 USB device is registered in
ThinkShield™ Passwordless Power-On Device Manager. With this feature, you can input the power-on
password or use the registered FIDO2 USB device to power on your computer.
Register your FIDO2 USB device in ThinkShield Passwordless Power-On Device Manager
1. Turn on the computer.
2. Press F12 during the power-on process.
3. If you set a power-on password, you are prompted to enter the correct password.
4. Select App Menu ➙ ThinkShield Passwordless Power-On Device Manager and press Enter.
5. Insert the FIDO2 USB device to register the device by following steps:
a. Select the available FIDO2 USB device that you want to register in the Discovered Devices field.
.
Chapter 4
Secure your computer and information
37
Hide quick links:
Advertisement
Table of Contents
