hit counter script
Download Print this page
Whirlpool AKR1912/IXS Instruction Manual
Whirlpool AKR1912/IXS Instruction Manual

Whirlpool AKR1912/IXS Instruction Manual

T- box hood

Advertisement

Quick Links

INSTRUCTION MANUAL
T- Box Hood
AKR1912/IXS

Advertisement

loading

Summary of Contents for Whirlpool AKR1912/IXS

  • Page 1 INSTRUCTION MANUAL T- Box Hood AKR1912/IXS...
  • Page 2 Dear Customer, If you follow the recommendations contained in this Instruction Manual, our appliance will give you constant high performance and will remain efficient for many years to come. CONTENTS RECOMMENDATIONS AND SUGGESTIONS CHARACTERISTICS INSTALLATION & USE MAINTENANCE Product Specification & Technical Parameters AKR1912/IXV Model 220-240V...
  • Page 3 recirculation mode. You can find the charcoal filter in the carton box. * Only a qualified and trained service technician can undertake the work of installation and servicing. * Check that the mains voltage corresponds to the one indicated on the rating plate fixed inside the hood.
  • Page 4 * The hood should not be used by children or person not instructed on its correct usage. MAINTENANCE * Proper maintenance of the Range Hood will assure proper performance of the unit. * Disconnect the hood from the main supply before carrying out any maintenance work.
  • Page 5 person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. * There shall be adequate ventilation of the room when the range hood is used at the same time as appliances burning gas or other fuels.
  • Page 7 COMPONENTS Components 2/3pcs Grease filter 1pcs Charcoal filter 1pcs Hood body steel bolt Cross self-drill bolt Exhaust Exterior chimney Inner chimney Cross discal thread bolt Fixing frame Cross discal bolt-big head Flat rubber band Plastic distensible sleeve Documentations Instruction Manual INSTALLATION &...
  • Page 8 2. Fix the appliance to the wall and align it in horizontal position to the wall units. 3. When the appliance has been adjusted, fix the hood using the screws A. For the various installations use screws and screw anchors suited to the type of wall (e.g.
  • Page 9 DUCT FIXING Caution: To reduce the risk of fire, recommend use aluminium ductwork. φ 1. Attach an adequate length of 150mm round duct into the recessed area of the air outlet adapter. 2. The duct has to be secured using two screws from two sides of the air outlet adapter.
  • Page 10 φ 4. Attach an adequate length of 160mm round duct to the air outlet adapter. Let the exhaust run for a minimum of 1 meter in Straight line in between bends / elbows for better efficiency. 5. The air must not be discharge into a flue that is used for exhausting fumes from appliances burning gas or other fuels"...
  • Page 11 E= Light When key A is being pressed, digital display screen will show "15 minutes" for timer whereas the minutes can be adjusted by pressing "+" or "-" on key B and D. When the first speed is on, pressing key A once to switch off, the digital display will shows "00"...
  • Page 12 Make sure the filter is securely engaged after assembly. WARNING: Always switch off the electrical supply before carrying out any operation on the appliance. Only a qualified and trained service technician can undertake the work of blubs replacement and servicing. CAUTION: 1.
  • Page 13 * For discolorations or deposits that persist, use a non-scratching household cleanser or stainless steel polishing powder with a little water and a soft cloth. * For stubborn cases use a plastic scouring pad or soft bristle brush together with cleanser and water. Rub lightly in direction of polishing lines or “grind” of the aluminum finish.
  • Page 14 Hood is not Call consumer installed properly service for support The air exhaust Distance between Call consumer performance is Hood and Hob is service for support too high Filter is choked Clean filter and refit in its place Duct is damaged Call consumer service for support...