hit counter script
Download
Share
Print this page
Epson Stylus CX4200 Installation Instruction
  1. Manuals
  2. Brands
  3. Epson Manuals
  4. Printer Accessories
  5. CX4200 - Stylus Color Inkjet
  6. Installation instruction
Epson Stylus CX4200 Installation Instruction

Epson Stylus CX4200 Installation Instruction

Continuous ink supply system for xm prefilled version with auto reset chips
Hide thumbs Also See for Stylus CX4200:
1
2
3
4
5
6
7

Advertisement

Quick Links

Download this manual
Continuous Ink Supply System
for
EPSON Stylus CX4200
Installation Instruction
For XM Prefilled Version
With Auto Reset Chips
This Version of the Continuous Ink Flow System comes with Prefilled
Cartridges and Auto Reset Chips. You just need to fill the
Reservoir bottles and print! The whole operation is very easy.
It's really an effective tool to save your money.
Get other manuals https://www.bkmanuals.com

Advertisement

loading

Related Manuals for Epson Stylus CX4200

Summary of Contents for Epson Stylus CX4200

  • Page 1 Continuous Ink Supply System EPSON Stylus CX4200 Installation Instruction For XM Prefilled Version With Auto Reset Chips This Version of the Continuous Ink Flow System comes with Prefilled Cartridges and Auto Reset Chips. You just need to fill the Reservoir bottles and print! The whole operation is very easy.

  • Page 2: General Guide

    CIS for EPSON Stylus CX4200 Instruction Thank you for purchasing XM Continuous Ink Supply System. We appreciate your support and will try our best to make your experience with our products a pleasant one. Printing has been a different experience ever since you installed XM Continuous Ink Supply system on your own printer.
  • Page 3 Put the CISS on the left side Pull out the small rubber plug Place 4pcs of air filters into of the printer. In the meantime from the air hole as above air holes, the thicker side place all the tubes at correct picture shown.
  • Page 4 Step 4. 4、 1)Remove old cartridges in the printer (Pic A); 2) Insert the CIS cartridges into the cartridge car (Pic B); Make sure the cartridges installed well.(Pic.C) Step 5, Fix Supporting Arm: 5、 1) Tear off the sticker(Pic A); Measure 2.6cm from the edge of the printer, Attach supporting arm on the printer as Picture B show;...
  • Page 5 7、Step Seven: Adjusting the Tube Adjust the tube length and move the cartridge car. Insure there will no block and collision when the tubes moving with cartridge car .Insure there's plenty length of tube to make the cartridge cart can thoroughly move to the left side.

  • Page 6: Reset Procedure

    9、Ninth step: Checking the Printing head Printing Head Normal Printing testing normal， Begin to print Printing Head printing Break Printing Break ，Clear the printer head Enter Printer service If there shows any breaks (maybe it caused by air bubbles in the printing head), please clean your printing head.
  • Page 7 the rubber plugs from the refill holes.(there is possibility of ink spattering. Be careful!) Refill ink according to the color in short supply. Then put the rubber back (Please keep the printer and the reservoir at the same horizontal line during the process of refilling ink.) Close the cartridge cover as the below pictures shown.