en Safety 1 Safety Observe the following safety instructions. 1.1 General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. 1.2 Intended use Only use this appliance: ¡...
Safety en 1.4 Safe installation WARNING ‒ Risk of electric shock! Incorrect installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Connect the appliance to a power supply with alternating cur- rent only via a properly installed socket with earthing. ▶...
Page 6
en Safety ▶ If the power cord is too short and a longer one is not available, please contact an electrician to have the domestic installation adapted. WARNING ‒ Risk of injury! The high weight of the appliance may result in injury when lifted. ▶...
Safety en CAUTION ‒ Risk of cutting! Touching sharp edges on the appliance may lead to cuts. ▶ Do not touch the sharp edges on the appliance. ▶ Wear protective gloves when installing and transporting the ap- pliance. 1.5 Safe use WARNING ‒ Risk of electric shock! If the appliance or the power cord is damaged, this is dangerous.
Page 8
en Safety WARNING ‒ Risk of explosion! If there is coal dust or flour in the air around the appliance, this may cause an explosion. ▶ Keep the area around the appliance clean during operation. WARNING ‒ Risk of poisoning! Condensation water from this appliance is not suitable for drinking and may be contaminated with fluff.
Safety en ▶ Rinse the laundry thoroughly with warm water and detergent be- fore drying it in the machine. ▶ Do not use the appliance if industrial chemicals have been used to clean the laundry beforehand. WARNING ‒ Risk of fire! If drying is interrupted early, the laundry is not cooled sufficiently and may ignite.
Page 10
en Safety WARNING ‒ Risk of injury! The use of non-original spare parts and non-original accessories is dangerous. ▶ Only use the manufacturer's original spare parts and original ac- cessories. WARNING ‒ Risk of poisoning! Poisonous fumes may be given off if you use cleaning agents that contain solvents.
Preventing material damage en Clean the appliance with nothing ▶ Preventing material damage 2 Preventing material but water and a soft, damp cloth. Remove all detergent residue, damage ▶ spray residue or other residues im- mediately if they come into contact Preventing material damage ATTENTION! with the appliance.
en Installation and connection After drying, clean the fluff filter 4.2 Scope of delivery → Page 31. After unpacking all parts, check for a If the fluff filter is dirty, this reduces any damage in transit and complete- the air flow in the appliance, ex- ness of the delivery.
Installation and connection en 4.3 Requirements for the in- Installation loca- Requirements tion stallation location In a washer-dryer Only use the ori- ATTENTION! stack ginal connection If the appliance is tilted at an angle set from the greater than 40°, residual water may dryer manufac- leak out of the appliance and cause turer when set-...
Page 14
en Installation and connection container. Use the water outlet hose Pull out the condensation hose to drain away excess condensation from the connecting piece. directly into the waste water system. Notes ¡ Operate this appliance using the water outlet hose provided. → "Connecting the water drain hose", Page 14 If you connect the water outlet...
Page 15
Installation and connection en Push the water drain hose as far Insert the stopper into the recess as it will go into the connecting in the top. piece. Insert the condensation container Empty the condensation container → Page 33. → Page 33. Connect the appliance to the water outlet.
en Installation and connection 4.5 Aligning the appliance Note: You can use the Y-distrib- In order to reduce vibrations and utor → Page 29 noises, align the appliance correctly. to connect the To align the appliance, turn the ap- ▶ water drain hose pliance feet. Check that the appli- of an additional ance is level using a spirit level.
Familiarising yourself with your appliance en Familiarising yourself with your appliance 5 Familiarising yourself with your appliance Familiarising yourself with your appliance 5.1 Appliance You can find an overview of the parts of your appliance here. On certain models, specific details such as the colour and shape may differ from those pictured.
en Familiarising yourself with your appliance 5.2 Control panel You can use the control panel to configure all functions of your appliance and to obtain information about the operating status. Programmes → Page 26 Programme selector → Page 30 Display → Page 19 Buttons → Page 22...
Display en Display 6 Display The display shows the current settings, options or relevant information. Display Display Description 0:40 Expected programme duration or programme time re- maining in hours and minutes. 1:25 The timed programme is set. → "Timed programmes", Page 27 Recommendation for the maximum load capacity for the selected program in kg.
Page 20
en Display Display Description Cupboard The dryness level is activated. Dry Plus) → "Buttons", Page 22 The adjusted dryness level is activated. → "Dryness level", Page 25 Less Iron- The crease-reduction function is activated. ing) → "Buttons", Page 23 Gentle) Gentle drying is activated for delicate fabrics. → "Buttons", Page 23 4.5 kg Half...
Page 21
Display en Display Description Program end Programme status Example...
en Buttons Buttons 7 Buttons Below is an overview of the buttons and their setting options. Buttons Button Selection Description Start/Reload ¡ Start Start, cancel or pause the programme. ¡ Cancel ¡ Pause 3 sec. ¡ Activate Activate or deactivate the childproof lock.
Page 23
Buttons en Button Selection Description Cupboard Dry Cupboard Dry ¡ Selecting Cupboard ¡ Dry activates the dry- ¡ +1 ness level. ¡ +2 The dryness level ¡ +3 defines how damp or dry the laundry is after the programme ends. → "Dryness level", Page 25 ¡...
Page 24
en Buttons Button Selection Description Finished in ¡ Programme end time ¡ Set the programme end time. ¡ Programme duration The programme dura- tion is already in- cluded in the set num- ber of hours. Once the programme has started, the pro- gramme duration is displayed.
Dryness level en Dryness level 8 Dryness level Each automatic programme has a specified dryness level. The dryness level Dryness level defines how dry or damp your laundry is after the programme ends. Dryness level Laundry Drying result Cupboard Multi-layered, thick laundry The laundry is dry.
en Programmes Programmes 9 Programmes You can dry your fabrics using either an automatic programme or a timed pro- Programmes gramme. 9.1 Automatic programmes Automatic programmes are pro- Tips grammes in which humidity sensors ¡ Select the dryness level according measure the residual moisture in the to the type of fabric or the desired laundry during the drying cycle.
Programmes en Programme Description Max. load (kg) ¡ If you dry the pillows and the pillows are not completely dry at the end of the programme, dry the pillows with a timed programme. → "Timed programmes", Page 27 Hygiene Plus Dry hard-wearing, heat-resistant fabrics made of cotton or linen.
Page 28
en Programmes Programme Description Max. load (kg) Remove laundry once the programme has ended and allow it to dry. Time Program Warm Dry all types of fabric except for wool and silk. Suitable for pre-dried or slightly damp laundry and for drying off multi-layered, thick laundry.
Accessories en Accessories 10 Accessories Use original accessories. These have Accessories been made especially for your appli- ance. Note: Some accessories are avail- able in other colours. Contact → "Customer Service", Page 47. Order number Connection kit To save space, stack the WTZ27410 appliance on a suitable washing machine of the same width and depth and that is from the...
en Laundry Turn the programme selector and Laundry 11 Laundry set the required programme. → "Programmes", Page 26 Laundry If required, adjust the programme 11.1 Preparing the laundry settings. ATTENTION! 12.3 Loading laundry Objects remaining in the laundry may damage the laundry and the drum. Note: To prevent creasing, note the Remove all items from any pock- ▶...
Basic operation en you want to avoid or cancel the Requirements cooling process, open the door. ¡ The display shows the following after drying: "End" → "Display", Page 20 ¡ or the display shows the following Open the door. during operation: . Add or remove laundry.
Page 32
en Basic operation Disconnect the two-part fluff filter. Clean the two fluff filters thoroughly under warm, running water and then dry them off. Open the two fluff filters. Close the two fluff filters and put them together. Remove the fluff. Insert the two-part fluff filter. Close the door.
Basic operation en Empty the condensation container. 12.10 Condensation con- tainer Condensation that forms in the appli- ance as it dries the laundry is collec- ted by default in the condensation container. Note: Operate this appliance using the water outlet hose provided. → "Connecting the water drain hose", Page 14 If you connect the water outlet hose, you do not have to regularly empty...
en Childproof lock Childproof lock 13 Childproof lock Secure your appliance against being Childproof lock operated unintentionally using the controls. 13.1 Activating the childproof lock Press and hold the two 3 sec. ▶ buttons for approx. 3 seconds. a The display shows . a The control elements are locked.
Basic settings en Basic settings 14 Basic settings You can configure the basic settings for your appliance to meet your needs. Basic settings 14.1 Overview of the basic settings Basic setting Programme Value Description position End signal 0 (off) Set the volume of the signal at the 1 (quiet) end of the programme.
en Appliance care Requirements 14.2 Changing the basic set- ¡ The drum is empty. tings ¡ The appliance is switched off. Set the programme selector to po- Clean the fluff filter. sition 1. → "Cleaning the fluff filter", Page 31 Pull out the condensation con- tainer horizontally and empty it.
Appliance care en Clean the filter in the condensation peatedly until you have run the ba- container. sic appliance care programme through to the end. 15.2 Calling up the appliance Requirements care programme ¡ The appliance care programme is ready. Requirement: The appliance care → "Preparing for appliance care", programme is ready.
en Appliance care ATTENTION! The functionality of 15.4 Running the intensive the appliance may be impaired if appliance care pro- you use the wrong quantity of fab- gramme ric softener, detergent, care product or cleaning agent. You can run the intensive appliance Follow the dosage recommenda- ▶...
Cleaning and servicing en a The appliance care programme 16.2 Moisture sensor continues. The moisture sensor in this appliance a "End" appears on the display and measures how damp the laundry is a signal tone sounds once the ap- during the drying cycle. The appli- pliance care programme has ance changes the duration of the ended.
en Cleaning and servicing Slide in the filter as far as it will go. 16.3 Condensation container filter During drying, fluff from the laundry gets into the condensation. The filter in the condensation container pro- tects the appliance from fluff. Clean the filter for the condensation tank.
Troubleshooting en Troubleshooting 17 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- Troubleshooting ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶...
Page 42
en Troubleshooting Fault Cause and troubleshooting Appliance paused, but Cooling process active. the drum is rotating. Not a fault – no action required. ▶ Creasing. The load is too large. Observe the maximum load capacity of the ▶ → "Programmes", Page 26. The laundry lies in the drum for too long after drying. Remove the laundry from the drum as soon as the drying programme has finished.
Page 43
Troubleshooting en Fault Cause and troubleshooting Condensation in the Ensure that the water drain hose is connected cor- ▶ condensation tank rectly. even though the water → "Connecting the water drain hose", Page 14 drain hose is connec- ted. The programme does Childproof lock is activated. not start.
Page 44
en Troubleshooting Fault Cause and troubleshooting Automatic self-cleaning function rinses the appliance's heat exchanger. Not a fault. Do not pull out the condensation tank. Do not cancel the programme. Water is leaking from Appliance is not correctly aligned. the appliance. → "Aligning the appliance", Page 16 ▶...
Page 45
Troubleshooting en Fault Cause and troubleshooting Odours have formed Stubborn dirt in the appliance or an extended appli- in the appliance. ance downtime of more than one month. Run the intensive appliance care programme. ▶ → "Appliance care", Page 36...
en Transportation, storage and disposal Empty the condensation container Transportation, storage and disposal 18 Transportation, stor- → Page 33. age and disposal Insert the condensation container → Page 33. Transportation, storage and disposal Disconnect the appliance's mains 18.1 Preparing the appliance plug from the power supply. for transportation a The appliance is now ready to be transported.
Customer Service en Information about current disposal 19.1 Product number (E-Nr.) methods are available from your and production number specialist dealer or local authority. (FD) This appliance is la- You can find the product number (E- belled in accordance Nr.) and the production number (FD) with European Directive on the appliance's rating plate.
Page 48
en Consumption values Consumption values 20 Consumption values Cottons Eco programme The actual values may deviate from Consumption values (denoted by the arrow symbol) is the indicated values depending on suitable for drying cotton laundry with the type of fabric, composition of a normal dampness level, and is the laundry to be dried, residual moisture most efficient programme for drying...
Technical data en Programme Final Load Spin Initial Pro- Energy mois- (kg) speed mois- gramm con- ture (rpm) ture e dura- sump- level level tion tion (h:min) (kWh/ cycle) Cottons + Iron 12.0 1400 2:05 0.96 Cottons + ...
Page 50
en Technical data You can find more information about your model online at https:// eprel.ec.europa.eu/ . This web ad- dress is linked to the official EU EPREL product database. Please then follow the instructions on searching for the model. The model identifier is made up of the charac- ters before the slash in the product number (E-Nr.) on the rating plate.
Page 52
Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service direct- ory.