Advertisement
Quick Links
Owner's Manual
iP
R
0
F E S
S
I
0
H A L I
6-1/2 in. (165 mm) 18 VOLTS PROFESSIONAL
CORDLESS
TRIM SAW
Model No
315.271190
Save this manual for
future reference
,_
CAUTION:
Read and follow
all Safety Rules and Operating
Instructions
before first use of
this product.
Customer
Help Line: 1-800-932-3188
Sears Roebuck
and Co., Hoffman
Estates,
IL 60179 USA
visit the Craftsman web page: www.sears.com/craftsman
972000-765
8-00
• Safety
• Features
• Assembly
• Operation
• Maintenance
• Parts List
®
Advertisement
Related Manuals for Craftsman 315.27119
Summary of Contents for Craftsman 315.27119
- Page 1 Safety Rules and Operating Instructions before first use of this product. Customer Help Line: 1-800-932-3188 Sears Roebuck and Co., Hoffman visit the Craftsman web page: www.sears.com/craftsman 972000-765 8-00 H A L I Estates, IL 60179 USA • Safety • Features •...
- Page 2 TABLE OF CONTENTS • General Safety Rules ... • Specific Safety Rules/Symbols ... • Features ... • Assembly ... • Operation ... • Maintenance ... • Accessories ... • Warranty ... • Exploded ViewAnd Repair Parts List ... • Parts Ordering / Service ... WARNING: Read and follow all instructions.
- Page 3 Tool Use and Care • Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control. • Do not force tool.
- Page 4 • When restarting a saw in the workpiece, center the saw blade in the kerf and check that teeth are not engaged into the material, If saw blade is binding, it may walk up or KICKBACK from the workpiece as the saw is restarted.
- Page 5 Important Safety Instructions For Charger Save these instructions. This manual contains important safety and operating instructions for battery charger item nu tuber 9-11040 (981399-001 ). Following this rule will reduce the risk of electric shock, fire, or serious personal injury. Before using battery charger, read all instructions and cautionary markings in this manual, on battery charger, and product using battery charger.
- Page 6 SYMBOLS SYMBOL NAME Volts Amperes Hertz Minutes "_, Alternating Current --=- Direct Current No Load Speed .../min Revolutions or Reciprocation Safety Alert Symbol DANGER: Failure to obey a safety warning will result in serious injury to yourself or to others. Always follow the safety precautions to reduce the risk of fire, electric shock and personal injury.
- Page 7 If any parts are damaged or missing, contact your nearest Sears Retail Store to obtain replacement parts before attempting to operate saw. A blade, blade wrench (5 mm hex key), rip guide (edge guide) and this owner's manual are also included.
- Page 8 BLADE WRENCH (5 mm HEXKEY) DEPTHOF CUTADJUSTMENT (DEPTHADJUSTMENT K NOB) BLADEWRENCH STORAGE AREA SWITCH TRIGGER LOCK-OFF BUTTON BATTERY PACK SPINDLE LOCK BUTTON UPPER GUIDESCREW SLADEGUARD (WINGSCREW) LOWERBLADE GUARDHANDLE BASE ASSEMBLY BEVELCUTADJUSTMENT (BEVEL ADJUSTMENT KNOB) LOWER BLADE BLADEGUARD RIPGUIDE Fig. 1...
- Page 9 LED FUNCTION OF CHARGER CHARGER YELLOWLIGHT"ON" ANDRED LIGHTFLASHING INDICATES DEFECTIVE BA'I-rERY PACK RED LIGHT"ON" INDICATES FAST CHARGING MODE GREENLIGHT"ON" INDICATES FULLY CHARGED ANDSLOWCHARGING TOMAINTAIN BATTERY PACK BA'I-rERY PACK SHOWN ATTACHED CHARGER BATTERY PACKSHOWN IN CHARGER MOUNTING CHARGER See Figum4. Your charger has a "key hole" hanging feature for conve- nient, space saving storage.
- Page 10 Failure to do so could cause an accident since blade will not tighten properly. • Fit saw blade inside lower blade guard and onto spindle. Note: The saw teeth point upward at the front of saw as shown in figure 6. • Replace outer blade washer. •...
- Page 11 • Remove blade wrench from storage area. See Figure 1. • Position saw as shown in figure 8, depress spindle lock button, and remove blade screw. Note: Turn blade screw clockwise to remove. • Remove outer blade washer. See Figure 8.
- Page 12 Note: This situation only occurs when extreme continuous use of your saw causes the batteries to become hot. It does not occur under normal circumstances. "CHARGING batteries. If the charger does not charge your battery pack...
- Page 13 SAW BLADES The best of saw blades will not cut efficiently if they are not kept clean, sharp, and properly set. Using a dull blade will place a heavy load on your saw and increase the danger of kickback. Keep extra blades on hand, so that sharp blades are always available.
- Page 14 BLADESETTOO DEEP The best guard against kickback is to avoid dangerous practices. Kickback occurs when the blade stalls rapidly and the saw is driven back towards you. Blade stalling is caused by any action which pinches the blade in the wood.
- Page 15 • Donotcutwarped or wetlumber. • Always holdyoursawfirmlywithbothhands andkeep yourbodyina balanced position soasto resistthe . forcesofkickback shoulditoccur. When using your saw, always stay alert and exercise control. Do not remove your saw from workpiece while the blade is moving. DEPTH OF CUT ADJUSTMENT Always keep correct blade depth setting.
- Page 16 Hold your saw firmly with both hands. See Figure 19. Depress the lock-off button and squeeze the switch trigger to start your saw. Always let the blade reach full speed, then guide your saw into the workpiece. WARNING: The blade coming in contact with the workpiece before it reaches full speed could cause your saw to "kickback"...
- Page 17 TO CROSS CUT OR RIP CUT When making a cross cut or rip cut, align your line of cut with the outer blade guide notch on the saw base as shown in figure 20. TOPVIEWOFSAW BLADE GUIDENOTCH _FRONT ALIGNOUTERBLADEGUIDENOTCHONSAWBASEWITHLINE OF CUTASSHOWNWHENMAKINGCROSSCUTSOR RiPCUTS...
- Page 18 50 °, blade should be set at full depth of cut. When making 45 ° bevel cuts, there is a notch in the saw base to help you line up the blade with the line of cut.
- Page 19 See Figure 26. ADJUSTMENT HEXNUT CARPENTER'S SQUARE Your saw has a positive 0 ° bevel stop, that has been factory adjusted to assure 0° angle of your saw blade when making 90 ° cuts. However, misalignment can occur during shipping. TO CHECK •...
- Page 20 WARNING: When servicing, use only identical Craftsman replacement parts. Use of any other part may create a hazard or cause product damage. Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use.
- Page 21 WARRANTY FULL ONE YEAR WARRANTY ON rRRFTSHRH If this I:RRFTSMRH Professional Cordless Trim Saw fails due to a defect in material or workmanship within one year from the date of purchase, Sears will repair it, free of charge. WARRANTY SERVICE IS AVAILABLE BY SIMPLY RETURNING THE TOOL TO THE NEAREST SEARS STORE OR SEARS SERVICE CENTER IN THE UNITED STATES.
- Page 22 CRAFTSMAN 18 VOLTS PROFESSIONAL CORDLESS TRIM SAW - MODEL "28 NUMBER 315.271190...
- Page 23 18 VOLTS PROFESSIONAL he model number wirrbe found on a prate attached to the motor housing. Always mention the model number in all correspondence regarding your I CORDLESS TRIM SAW or when ordering repair parts. SEE BACK PAGE FOR PARTS ORDERING...
- Page 24 Get it fixed, at your home or ours! For repair of major brand appliances in your own home... no matter who made it, no matter who sold it! 1-800-4-MY-HOM E sM Anytime, day or night (1-800-469-4663) www.sears.com To bring in products such as vacuums, lawn equipment and electronics for repair, call for the location of your nearest Sears Parts &...