D-Link DWR-M930 How Do

Wireless 4g lte router

Table of Contents

Download this manual

How do I install the D-Link DWR-M930 Wireless 4G LTE

Note: Before you begin, ensure you have your SIM Card and necessary network information

(such as APN settings) from your service provider. However, many 4G LTE Routers are

designed to be plug-and-play.

Insert the SIM card into the appropriate slot, and make sure it is inserted correctly.

DWR-M930 supports Nano-SIM

Connect the DWR-M930 to a power source using the included adapter. Press the power

button until the device turns on.

On your device (computer, smartphone, tablet) connect wirelessly to the dlink-xxxx (xxxx

is the last 4 digits of mac address) from the Wi-Fi list of the device you want to connect

from. When prompted for a password, use the WPA key printed at the bottom of the

router or by pushing the WPS button at the back of the Router.

Open a web browser (such as Chrome, Firefox, or Safari) on your connected device and

enter the router's IP address into the URL bar:

The page will be prompted to enter a username and password. The default username

and the default password are:

•

Username: admin

•

Password: (as printed on the device label at the bottom of the router)

Technical Support Setup Procedure

Router?

http://192.168.0.1

Sim Card Sizes

then press enter.

Table of Contents

Page 1 Insert the SIM card into the appropriate slot, and make sure it is inserted correctly. DWR-M930 supports Nano-SIM Sim Card Sizes Connect the DWR-M930 to a power source using the included adapter. Press the power button until the device turns on. On your device (computer, smartphone, tablet) connect wirelessly to the dlink-xxxx (xxxx is the last 4 digits of mac address) from the Wi-Fi list of the device you want to connect from.
Page 2 To modify the Wi-Fi name and Wi-Fi password: Click on the ‘Wireless’ tab at the top of the page then ‘Basic Settings’ Look for the SSID field, remove the default Wi-Fi name (d-link or dlink-xxxx), and enter a new one.
Page 3 Technical Support Setup Procedure To Modify the Wireless Password (WPA Key), click on the ‘Wireless’ tab at the top of the page then ‘Security’. Within the Wireless Settings, you will find an option for security mode. Typically, you can choose between WEP, WPA, WPA2, WPA3, or WPA2/WPA3-Mixed for Encryption. Select the desired security mode (WPA2/WPA3-mixed is recommended for better security) Then look for the Pre-Shared Key at the bottom of the page.