Page 1
DELL P2225HB 1. Disassembly Procedures Turn off the monitor. Pull out “Control board FFC” from “Interface board” and tear off it from Main Shielding to take off “Rear Cover” Place the monitor on a soft cloth or cushion Press and hold the stand release button...
Page 2
DELL P2225B Tear off an aluminum foil mylar from Tear off a gasket from “USB Shielding” “Main Shielding” (see pink mark) Tear off a black tape from “USB board Tear off a gasket from “USB board” FFC” and “Panel (see red mark) Disassemble “USB board”...
Page 3
DELL P2225HB Tear off 3 conductive tapes from “Main Disassemble “MYLAR” from “Main Shielding and “Panel” Shielding” Unlock 2 hexagonal screws Tear off a long tape from “LVDS FFC” Disassemble “LVDS FFC” from “Panel” Take off “Main Shielding” from “Panel”...
Page 4
DELL P2225B Remove electrolyte capacitors (red mark) from printed circuit boards S20-1 Cut the glue between bulk cap. and PCB with a knife S20-2 Ensure cutting path within the glue, don’t touch bulk cap. or PCB...
Page 5
DELL P2225HB S20-3 Take out bulk cap. pin solder with soldering iron and absorber S20-4 Lift the bulk cap. up and away from the PCB...
Page 6
DELL P2225B 2. Product material information The following substances, preparations, or components should be disposed of or recovered separately from other WEEE in compliance with Article 4 of EU Council Directive 75/442/EEC. Capacitors / condensers (containing No used PCB/PCT) Mercury containing components...