Advertisement
Quick Links
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
Wear a face
instruction
shield
manual
1. SAFETY
WARNING! Modern vehicles contain extensive electronic systems.
‰
You are required to check with the vehicle and battery manufacturer for any specific instructions regarding the use of this type of
equipment on each vehicle.
▲
DANGER! BE AWARE, LEAD-ACID BATTERIES GENERATE EXPLOSIVE GASES DURING NORMAL BATTERY OPERATION.
FOR THIS REASON, IT IS VERY IMPORTANT TO READ AND FOLLOW THESE INSTRUCTIONS CAREFULLY, EACH TIME YOU
USE THE EQUIPMENT.
Follow these instructions and those published by the battery and vehicle manufacturers. Remember to review warning marks on all
9
products and engines.
WARNING! This device is not intended for use by children. Persons with reduced physical, sensory or mental capabilities, or lack of
‰
experience and knowledge, must be given supervision or instruction concerning the use of the product by a person responsible for their safety.
Children should be supervised to ensure they do not play with the unit.
9
WARNING! Engines that have been running can be hot enough to burn flesh, rags and paper etc.
‰
WARNING! Running engines have components that are rotating i.e. cooling fans, fan belts etc. Keep hands and clothing clear.
‰
WARNING! Ensure adequate ventilation for both engine exhaust and battery gas fumes.
‰
2. INTRODUCTION
Wireless connection to check the battery health quickly and easily on any mobile device. The free app easily tests the battery's health and stores
the results, these can also be emailed directly to the customer. shared directly with customers via email.(iOS and Android compatible). Displays
the data in real-time checking the battery's state of charge, CCA, voltage, internal resistance, charging system and cranking voltage. The pocket-
sized device makes storing the tester easy. Compatible with regular flooded, AGM, GEL and EFB batteries. Water resistance with an IP65 rating.
3. SPECIFICATION
Model No.: .................................................................BT2030
Input voltage: ..................................................... DC 6V - 30V
IP Rating:` .......................................................................IP65
Working Temperature: .......................................-40
Rating systems: C CA, EN, GB, SAE, BCI, CA, MCA, JIS, DIN, IEC
Reverse Polarity Protection: ............................................. Yes
4. APP INSTALLATION
4.1.
Download the wireless app to your phone using the QR code provided (fig.1).
4.2.
Firstly turn on the wireless function of the mobile phone and allow the application to access the location
permission of the mobile phone.
4.3.
When running the application for the first time, the app will ask for required permissions, all these are necessary.
NOTE: The Android app obtains the location permission for the wireless scanning function, which is
regulated by the Android system.
Disabling this permission will cause the device not to be scanned or wireless scanning will be slow.
5. OPERATION
DO NOT attempt to attach or remove the tester and its clamps from a running engine.
8
5.1.
Ensure that the engine is not running and is not too hot to touch when connecting or removing the tester.
5.2.
Before testing the battery, ensure the engine is off otherwise it will affect the test results.
5.3.
Place the tester body in a location such that it cannot contact any moving parts of the engine and where the terminal clamps can easily
reach the relevant terminal post.
5.4.
Connect the tester leads to the relevant terminal post on the battery. Connect the red (+ve) clamp to the positive terminal on the
battery and the black (-ve) clamp to negative terminal on the battery. When removing the clamps, reverse the order.
5.5.
Start the app and then start the engine. Follow the on-screen menus to complete the testing processes.
5.6.
It is possible to print or export test results via email after testing a battery.
© Jack Sealey Limited
12V WIRELESS BATTERY TESTER, CAR, BOATS,
MOTORBIKES, TRUCKS
MODEL NO:
Wear protective
Warning:
clothing
Electricity
C to 80
o
Original Language Version
BT2030
Wear protective
Warning: Hot
gloves
surfaces in
engine bay
C
o
Warning:
Warning:
Possible
Engine exhaust
battery gases
fumes
BT2030 Issue:1 12/09/24
Warning:
Moving parts in
engine bay
fig.1
Advertisement
Related Manuals for Sealey BT2030
Summary of Contents for Sealey BT2030
- Page 1 BT2030 MODEL NO: Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
- Page 2 Important: No Liability is accepted for incorrect use of this product. Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim. REGISTER YOUR PURCHASE HERE Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757500 sales@sealey.co.uk www.sealey.co.uk Original Language Version © Jack Sealey Limited...