Show Vrrp Interface Stats - Dell PowerEdge M420 Reference Manual
Dell powerconnect m6220/m6348/m8024/m8024-k cli reference guide
Hide thumbs
Also See for PowerEdge M420:
- Configuration manual (1246 pages) ,
- Getting started manual (202 pages) ,
- Owner's manual (121 pages)
Table of Contents
Advertisement
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Example
The following example displays all configuration information about the
virtual router on the selected interface.
console#show vrrp interface brief
Interface VRID IP Address
--------- ---- -------------- ------
vlan1
vlan2
show vrrp interface stats
Use the show vrrp interface stats command in User EXEC mode to display
the statistical information about each virtual router configured on the switch.
Syntax
show vrrp interface stats vlan
vlan-id — Valid VLAN ID.
•
vr-id — The virtual router identifier. (Range: 1-255)
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
1256
Virtual Router Redundancy Protocol Commands
2
0.0.0.0
5
192.168.5.55
vlan-id vr-id
Mode
State
------------
Disable Initialize
Enable
Initialize
- Quick Links:
- Table of Contents
- Ethernet Configuration
Hide quick links:
Advertisement
Chapters
Table of Contents
