Page 1 Color Scanner User’s Guide...
Page 2: Copyright Notice
SEIKO EPSON CORPORATION. The information contained herein is designed only for use with this EPSON scanner. EPSON is not responsible for any use of this information as applied to other scanners.
Page 3: Table Of Contents
Contents Welcome! About Your Scanner About Your Software Getting More Information Warnings, Cautions, and Notes Reading the Online Reference Guide Reading Your Other Electronic Manuals Registering Chapter 1 Setting Up Your Scanner Unpacking Your Scanner Choosing a Good Place for Your Scanner Identifying Scanner Parts Unlocking the Scanner Installing the Automatic Document Feeder...
Page 4 Scaling (Resizing) Images Batch Scanning Step-by-Step Scanning Instructions Loading the Automatic Document Feeder Placing a Single Original Document Scanning with EPSON TWAIN HS Using the a Start Button Setting Up the a Start Button Chapter 4 Network Scanning Setting Up the Scanner Server...
Page 5 Using a Network Scanner Starting EPSON Scan Server Starting EPSON TWAIN HS Network Starting a Scan Stopping a Scan in Progress Chapter 5 Maintaining and Transporting Your Scanner Cleaning the Scanner Replacing the Fluorescent Lamp Transporting the Scanner Chapter 6...
Page 6 Appendix A Installing the TCP/IP Protocol Installing the TCP/IP Protocol on Windows Me and Windows 2000 Installing the TCP/IP Protocol on Windows 98 and Windows 95 Assigning an IP Address for Windows 95 and Windows 98 (First Release) 124 Installing the TCP/IP Protocol on Windows NT 4.0 Assigning an IP Address on Windows NT 4.0 Appendix B Specifications Appendix C Notices...
Page 7: Welcome
Welcome! ® The EPSON GT-30000 is a 36-bit, large-format professional scanner that delivers superior results and versatility for both departments and busy workgroups. Using ® EPSON’s ColorTrue Imaging System, the scanner captures text and images with amazing detail and accurate colors. Its 600 1200 dpi optical resolution and 11.7 17-inch scan bed let you quickly capture incredibly sharp images from...
Page 8: About Your Software
About Your Software The EPSON GT-30000 comes with these applications: EPSON TWAIN HS General-purpose driver for scanning photographs, artwork, or text for Optical Character Recognition (OCR). Includes automatic document size recognition. EPSON TWAIN HS Network and EPSON Scan Server Ideal general-purpose drivers for network scanning from hundreds of applications.
Page 9: Getting More Information
Getting More Information There are several ways to learn more about your EPSON GT-30000. Here’s where to look for help: EPSON GT-30000 Reference Guide Provides detailed information about EPSON TWAIN HS, including additional troubleshooting tips. You must have a web browser (Netscape Navigator ®...
Page 10: Warnings, Cautions, And Notes
Netscape Navigator or Internet Explorer, versions 3.0 or later). If you copy the manual to your hard drive, you can read it anytime. After you copy the manual, just click Start, point to Programs, then EPSON, and select EPSON GT-30000 Reference Guide.
Page 11 4. Open the folder, then double-click the Manuals Reference Guide window opens: Click to view the Reference Guide. Click to install the Reference Guide on your hard drive. 5. Click View Reference Guide Click a topic to expand its contents. GT30000.exe .
Page 12: Reading Your Other Electronic Manuals
6. Click one of the topics on the left to expand its contents. Then click the subtopic you want to view. expanded contents list Reading Your Other Electronic Manuals To read other PDF manuals on your CD-ROM, you’ll use Acrobat Reader. If Acrobat Reader is not already installed on your computer, you can install it with the other scanner software.
Page 13 EPSON PageManager User’s Manual Acrobat Reader—Select You can download and view a PDF version of the GT-30000 User’s Guide from the EPSON support web site at http://support.epson.com. PixTools QuickScan includes on-screen help. To access it, click Start, Programs, PixTools Products, Documentation, and select QuickScan Help.
Page 14: Registering
Registering Please take a minute to complete the electronic registration form which appears at the end of the software installation process (see “Chapter 2, Installing the Software”). Registering enables you to receive special information on options, new products, and software upgrades. You’ll get immediate attention if you have a problem with your scanner.
Page 15: Chapter 1 Setting Up Your Scanner
Chapter 1 Setting Up Your Scanner Setting up your scanner is easy—just follow the steps in this chapter in the order listed below. 1. Unpack and choose a good place for the scanner. 2. Unlock the scanner. 3. Install the automatic document feeder. 4.
Page 16: Unpacking Your Scanner
Save the packaging in case you need it later. The scanner and automatic document feeder are large and heavy, so you may need to have someone help you unpack and lift them. Along with this guide, your EPSON GT-30000 comes with these items: EPSON GT-30000 automatic document feeder...
Page 17: Choosing A Good Place For Your Scanner
Choosing a Good Place for Your Scanner When deciding where to place the scanner, follow these guidelines: Place the scanner on a flat, stable surface. If the scanner is tilted, it can’t operate properly. Make sure to place the scanner where you can easily unplug the power cord, near a grounded wall outlet, and where your cable can reach your computer.
Page 18: Identifying Scanner Parts
Identifying Scanner Parts Operate button a Start button SCSI terminator switch Setting Up Your Scanner ERROR light READY light SCSI interface (50-pin) ADF connector SCSI interface (68-pin) SCSI select switch N/W automatic document feeder document table optional interface slot AC socket SCSI ID dial...
Page 19: Unlocking The Scanner
Unlocking the Scanner Before installing the automatic document feeder and connecting the scanner to a power source, you must release the transportation lock on the back of the scanner. Use a coin or large flat-head screwdriver to turn the transportation lock button counterclockwise to the unlocked position, as shown.
Page 20: Installing The Automatic Document Feeder
Installing the Automatic Document Feeder The automatic document feeder (ADF) automatically loads multi-page documents into your scanner. The ADF is large and heavy. Clear a wide space around the scanner before installing the ADF. You may need to have someone help you unpack and lift it.
Page 21 4. Slide the ADF onto the scanner, lining up the screws with the holes as shown. 5. Twist the knobs onto the ends of the screws and tighten them using the screwdriver tool. 6. Attach the ADF’s connector to the scanner’s option interface. Then tighten the connector screws.
Page 22: Testing Your Scanner's Operation
Testing Your Scanner’s Operation To make sure your scanner is working properly, it’s a good idea to turn it on before you connect it to your computer. The scanner’s voltage cannot be changed. If the label on the back of the scanner does not display the correct voltage for your area, contact your dealer.
Page 23: Connecting The Scanner To Your Computer
Connecting the Scanner to Your Computer You can connect the scanner to your computer in one of the following ways: SCSI If you have a compatible PCI SCSI/SCSI 2 adapter board, or your computer has an ASPI-compliant SCSI 2 board (Adaptec connect the scanner with a SCSI 2 cable (micro DB 50-pin connector) not more than 9.8 feet (3 meters) long.
Page 24: Setting The Scsi Terminator
Setting the SCSI Terminator The scanner’s SCSI terminator is built-in, with a switch to turn it on or off on the scanner’s back panel. If the scanner is your only SCSI device, leave the terminator turned (the default setting). If the scanner is the last device in the chain, leave the terminator turned Setting Up Your Scanner...
Page 25: Setting The Select Switch
If the scanner is in the middle of a chain, turn the switch Setting the Select Switch The scanner has two SCSI connectors: one for a 68-pin SCSI cable and the other for a 50-pin SCSI cable. You may need to change the select switch setting depending on the SCSI card and cable you are using in your computer.
Page 26 4. Plug in the power cables for your computer, scanner, and other external SCSI devices. Always turn on your scanner first. Otherwise, the computer may not recognize your EPSON scanner when you install your software. Setting Up Your Scanner 68-pin SCSI...
Page 27: Connecting To An Ieee 1394 Scanner Interface
If you purchased the optional IEEE 1394 scanner interface card (B808342), follow the instructions in this section to install the interface card in your scanner and connect the scanner to your computer. You can purchase genuine EPSON supplies and accessories from the EPSON Store ™...
Page 28 2. Turn the card over so that the circuit board side is facing down, and insert it in the optional interface slot. Push gently until the card is firmly seated in the expansion slot inside the optional interface slot. 3. Tighten the retaining screws and reconnect the scanner’s cables.
Page 29: Installing The Software
Chapter 2 Installing the Software This chapter explains how to install the scanner software on your computer so it works properly with your scanner. It also includes instructions for installing the ISIS driver, PixTools QuickScan and Presto! PageManager. See “Installing Additional Software”...
Page 30: Installing The Software For Windows Me
Installing the Software for Windows Me Before you begin, make sure the GT-30000 is connected to your computer. Also, make sure you’ve recalibrated your monitor to factory specifications (see your monitor documentation for instructions). This procedure automatically installs your EPSON TWAIN HS driver. You’ll be asked to install your SCSI or IEEE 1394 driver at the beginning of installation.
Page 31 1.8.) Then click The EPSON Screen Calibration Utility calibrates the preview image you see in your EPSON TWAIN HS driver to match your monitor settings. Specify Specify a location on your CD-ROM drive. (The example to...
Page 32 Scanners and Cameras icon in your Windows Control Panel to open the Scanners and Cameras Properties window. Select EPSON GT-30000 on the Devices tab, if necessary, and click the Properties button to display the EPSON GT-30000 Properties window.
Page 33 Don’t select either of the two network applications, EPSON TWAIN HS Network or EPSON Scan Server. The EPSON TWAIN HS driver, which is already installed on your computer, lets you scan to a GT-30000 connected to your computer. If you want to install software for a network scanner, go to Chapter 4, “Network Scanning”...
Page 34 Test Successful message displays. Click close the message. appears next to Status window. 4. Click to close the Properties window. Installing the Software Scanners and EPSON GT-30000 tab, then click the button. If Device Ready on the Properties...
Page 35 Selecting the GT-30000 as Your Default Scanner (Windows Me) If you have more than one scanner connected to your computer, you can set up the GT-30000 as the default scanner. 1. Open the Windows Control Panel and double-click the Scanners and icon.
Page 36: Installing The Software For Windows 2000
Installing the Software for Windows 2000 Before you begin, make sure the GT-30000 is connected to your computer. Also, make sure you’ve recalibrated your monitor to factory specifications (see your monitor documentation for instructions). This procedure automatically installs your EPSON TWAIN HS driver. You’ll be asked to install your SCSI or IEEE 1394 driver at the beginning of installation.
Page 37 Windows 2000 source files on your hard Browse drive; then click 7. When you see the Digital Signature Not Found screen, click If prompted for the EPSON Scanners Driver Disk 1, reinsert your EPSON GT-30000 Scanning Tools CD-ROM. Specify Next Yes.
Page 38 Scanners and Cameras icon in your Windows Control Panel to open the Scanners and Cameras Properties window. Select EPSON GT-30000 on the Devices tab, if necessary, and click the Properties button to display the EPSON GT-30000 Properties window.
Page 39 Don’t select either of the two network applications, EPSON TWAIN HS Network or EPSON Scan Server. The EPSON TWAIN HS driver, which is already installed on your computer, lets you scan to a GT-30000 connected to your computer. If you want to install software for a network scanner, go to Chapter 4, “Network Scanning.”...
Page 40 If you’re done installing software, remove the EPSON GT-30000 Scanning Tools CD-ROM and restart your computer. Then follow the instructions in the next section to make sure your scanner is operating properly. If you want to install the ISIS driver, PixTools QuickScan, or Presto! PageManager continue with the instructions under “Installing Additional Software”...
Page 41: Windows 2000
Selecting the GT-30000 as Your Default Scanner (Windows 2000) If you have more than one scanner connected to your computer, you can set up the GT-30000 as the default scanner. 1. Open the Windows Control Panel and double-click the Scanners and...
Page 42: Installing The Software For Windows 98
Installing the Software for Windows 98 Before you begin, make sure the GT-30000 is connected to your computer. Also, make sure you’ve recalibrated your monitor to factory specifications (see your monitor documentation for instructions). This procedure automatically installs your EPSON TWAIN HS driver. If you connected the scanner with a SCSI cable, you’ll be asked to install your SCSI driver at...
Page 43 Scanners and Cameras icon in your Windows Control Panel to open the Scanners and Cameras Properties window. Select EPSON GT-30000 on the Devices tab, if necessary, and click the Properties button to display the EPSON GT-30000 Properties window.
Page 44 Don’t select either of the two network applications, EPSON TWAIN HS Network or EPSON Scan Server. The EPSON TWAIN HS driver, which is already installed on your computer, lets you scan to a GT-30000 connected to your computer. If you want to install software for a network scanner, go to Chapter 4, “Network Scanning.”...
Page 45 If you’re done installing software, remove the EPSON GT-30000 Scanning Tools CD-ROM and restart your computer. Then follow the instructions in the next section to make sure your scanner is operating properly. If you want to install the ISIS driver, PixTools QuickScan, or Presto! PageManager continue with the instructions under “Installing Additional Software”...
Page 46 Selecting the GT-30000 as Your Default Scanner (Windows 98) If you have more than one scanner connected to your computer and you’re running Windows 98, you can set up the EPSON GT-30000 as your default scanner. 1. Open the Windows Control Panel and double-click the...
Page 47: Installing The Software For Windows 95
Installing the Software for Windows 95 Follow the instructions in this section to install your EPSON GT-30000 scanner driver and other software on your scanner software CD-ROM for stand-alone scanning. Before you begin installing software, make sure you recalibrate your monitor to factory specifications.
Page 48 4. When you see the window on the right, click Finish your computer. Continue with the instructions in the next section to install EPSON TWAIN HS and Acrobat Reader (if necessary). Installing the Software . Then . Then restart...
Page 49 Installing Other Software on Your CD-ROM Follow these steps to install EPSON TWAIN HS, Adobe Acrobat Reader (if it is not already installed on your computer) and complete the GT-30000 electronic registration form. 1. Double-click the My Computer CD-ROM icon.
Page 50 Information. Click window. You can test your scanner connection at any time. (Double-click the icon in your Windows TWAIN HS Control Panel to open the EPSON TWAIN HS window. Then click the button.) Installing the Software SCSI appears in the...
Page 51 If you need to recalibrate your screen at a later time, double-click the EPSON TWAIN HS icon in your Windows Control Panel to open the EPSON TWAIN HS window. Then click the Screen Calibration Utility button at the bottom of the window.
Page 52: Installing The Software For Windows Nt 4.0
Installing the Software for Windows NT 4.0 Follow the instructions in this section to install the EPSON GT-30000 scanner driver and other software on your scanner software CD-ROM. Before you begin installing software, make sure you recalibrate your monitor to factory specifications. (See your monitor documentation for instructions.)
Page 53 EPSON GT-30000 Registration, then click Don’t select either of the two network applications, EPSON TWAIN HS Network or EPSON Scan Server. The EPSON TWAIN HS driver lets you scan when your scanner is connected directly to your computer. If you want to use the scanner on a network, go to Chapter 4, “Network...
Page 54 You won’t need to change the screen calibration as long as you continue to use the same display. If you need to recalibrate your screen at a later time, open the EPSON TWAIN HS window by double-clicking the EPSON TWAIN HS icon in the Windows Control Panel. Then click the Screen Calibration button at the bottom of the window to start the utility.
Page 55: Installing Additional Software
You should install your ISIS-compatible application before you install the ISIS driver. 1. If necessary, insert your scanner software CD-ROM in the drive. If you don’t see the Select Language screen, double-click double-click the Epson 2. Make sure English selected and click . The Software Setup window appears.
Page 56: Installing Pixtools Quickscan
Then Setup.exe follow the instructions on the screen. 5. When installation is complete, click restart your computer. Installing the Software My Computer CD-ROM icon. Epson . The Quickscn , then on your desktop, then...
Page 57 Accessing the ISIS Driver from QuickScan Before you can scan, you must select the GT-30000 as your scanner. To select the scanner: 1. Choose Select Scanner Selection dialog appears. 2. Make sure EPSON GT-30000 is selected and click from the menu.
Page 58: Installing Presto! Pagemanager
5. Double-click the icon, then Setup.exe follow the instructions on the screen. 6. When installation is complete, click Installing the Software My Computer CD-ROM icon. Epson . The English , then restart your computer. on your desktop, then...
Page 59: Chapter 3 How To Scan
Your EPSON GT-30000 scanner comes with two all-purpose drivers, EPSON TWAIN HS and EPSON TWAIN HS Network, as well as the ISIS driver. The scanner driver is what you select as the source in your application. This is the software that allows your computer to communicate with your scanner.
Page 60: Selecting Resolution
100 dpi with a 300 dpi laser printer, and up to 200 dpi with a 600 dpi laser printer. For 1440 dpi ink jet printers, such as the EPSON Stylus series, use a scanning resolution of up to 300 dpi. Try a scanning resolution of 240 dpi for 720 dpi printing.
Page 61: Scanning Color Images
If the colors in your scanned image don’t match those in your original document, try experimenting with the Unsharp Mask setting. Click the button on the Destination EPSON TWAIN HS or EPSON TWAIN HS Network main window to display the Destination window, and then select or deselect Unsharp Mask Scaling (Resizing) Images If you plan to enlarge your image, it’s better to enlarge it by scanning at a higher...
Page 62: Step-By-Step Scanning Instructions
Step-by-Step Scanning Instructions This section contains step-by-step instructions for scanning an image. Before you scan, make sure you’ve set up your scanner and installed the software as described in Chapter 1, “Setting Up Your Scanner.” If you are scanning a document with multiple pages, see “Loading the Automatic Document Feeder”...
Page 63: Placing A Single Original Document
To load documents into the ADF, follow these steps: 1. Slide the edge guide all the way out. 2. Insert the document stack face up into the ADF until it meets resistance. Then move the right edge guide so it is flush with the right edge of your document. 3.
Page 64: Scanning With Epson Twain Hs
Scanning with EPSON TWAIN HS Follow the steps below to scan a document using EPSON TWAIN HS or EPSON TWAIN HS Network: 1. Start your host application (for example, Presto! PageManager or any other application that supports EPSON TWAIN HS).
Page 65 Generally it’s a good idea to use the Auto Exposure button to obtain the best settings for your scan. See your electronic EPSON GT-30000 Reference Guide for more information about choosing settings. If you need to remove color cast from your image, use the Gray Balance Intensity feature.
Page 66: Using The A Start Button
The a Start button features described in this chapter are only available when you use EPSON TWAIN HS to access a scanner connected to your computer and you are running Windows Me, Windows 2000, or Windows 98. If you are running Windows 95 or Windows NT, the Start button is disabled.
Page 67 Scanners and Cameras Properties window. Press the scanner’s a Start button to have EPSON TWAIN HS started and the document scanned into the assigned application. You can disable the a Start button by clicking the Disable device events checkbox on the Events tab.
Page 68 How to Scan...
Page 69: Chapter 4 Network Scanning
Chapter 4 Network Scanning You can use EPSON Scan Server and EPSON TWAIN HS Network, two applications on your EPSON GT-30000 Scanner Software CD-ROM, to share your scanner with other users in a small workgroup. Your network must have a scanner server (the Windows computer connected to the scanner) and one or more client computers.
Page 70 EPSON GT-30000 * If you installed EPSON TWAIN HS on the scanner server so that you could make a direct connection to the scanner, remember that you must exit EPSON Scan Server to use EPSON TWAIN HS.
Page 71: Setting Up The Scanner Server
Setting Up the Scanner Server You can set up any Windows Me, Windows 2000, Windows 98, Windows 95, or Windows NT 4.0 computer as a scanner server, as long as it has a network interface card installed and is running the TCP/IP protocol. Before you begin, make sure the scanner is unlocked and connected to the scanner server (see Chapter 1, “Setting Up Your Scanner”...
Page 72: Installing The Scanner Server Software For Windows Me
Installing the Scanner Server Software for Windows Me Before you begin, make sure the GT-30000 is connected to your computer. Also, make sure you’ve recalibrated your monitor to factory specifications. (See your monitor documentation for instructions.) Depending on how your computer system was originally set up, you may be asked to insert your Windows Me CD-ROM during driver installation.
Page 73 Specify a location option. If not unchecked, the wrong driver may be installed. 5. Browse to EPSON\ English\WINME the right uses “E” as the CD-ROM drive letter. Your CD-ROM drive letter may be different.) Click 6. Follow the instructions on the screen.
Page 74 Finishing the Scanner Server Installation on Windows Me Before your computer can share its scanner, you must install EPSON Scan Server. At the same time, you can install other software that came with your scanner. Your scanner comes with a multi-user license (6) for Presto! PageManager, an unlimited license for EPSON TWAIN HS Network and TWAIN HS, and a single-user license for PixTools QuickScan and the ISIS driver.
Page 75 EPSON TWAIN HS Network if you want to use a GT-30000 connected to another computer. 5. Follow the instructions on the screen to install EPSON Scan Server and any other software you selected in the software selection window. 6. Follow the instructions in “Installing Additional Software” on page 49 if you want to install the ISIS driver, PixTools QuickScan, or Presto! PageManager.
Page 76 GT-30000 as the default scanner. 1. Open the Windows Control Panel and double-click the icon. Cameras 2. Double-click the icon. You see the EPSON GT-30000 Properties window. 3. Click the Utility as default scanner for EPSON Scan is checked, and then...
Page 77: Installing The Scanner Server Software For Windows 2000
Installing the Scanner Server Software for Windows 2000 Before you begin, make sure the GT-30000 is connected to your computer. Also, make sure you’ve recalibrated your monitor to factory specifications. (See your monitor documentation for instructions.) Depending on how your computer system was originally set up, you may be asked to insert your Windows 2000 CD-ROM during driver installation.
Page 78 4. Select CD-ROM drives , if necessary, and click a location Next 5. Browse to EPSON\ English\WIN2000 CD-ROM drive. (The example to the right uses “F” as the CD-ROM drive letter. Your CD-ROM drive letter may be different.) Click close the Browse window, and then...
Page 79 Finishing the Scanner Server Installation on Windows 2000 Before your computer can share its scanner, you must install EPSON Scan Server. At the same time, you can install other software that came with your scanner. Your scanner comes with a multi-user license (6) for Presto! PageManager, an unlimited license for EPSON TWAIN HS Network and TWAIN HS, and a single-user license for PixTools QuickScan and the ISIS driver.
Page 80 Only install EPSON TWAIN HS Network if you want to use a GT-30000 attached to another computer. 5. Follow the instructions on the screen to install EPSON Scan Server and any other software you selected in the software selection window.
Page 81 Scanners Cameras and Cameras Properties window. 2. Make sure EPSON GT-30000 selected, and click the button. You see the EPSON GT-30000 Properties window. 3. Click the tab. Make sure Utility as default scanner for EPSON Scan...
Page 82: Installing The Scanner Server Software For Windows 98
Installing the Scanner Server Software for Windows 98 Follow the instructions in this section to install your EPSON GT-30000 scanner driver and other software on your scanner software CD-ROM. Before you begin, make sure you recalibrate your monitor to factory specifications. (See your monitor documentation for instructions.)
Page 83 Scanners and Cameras icon in your Windows Control Panel to open the Scanners and Cameras Properties window. In the Devices tab, make sure EPSON GT-30000 is selected, and then click the Properties button to display the EPSON GT-30000 Properties window.
Page 84 Continue with the instructions in the next section to install EPSON Scan Server and Acrobat Reader (if necessary). Network Scanning...
Page 85 Finishing the Scanner Server Installation on Windows 98 Before your computer can share its scanner, you must install EPSON Scan Server. At the same time, you can install other software that came with your scanner. Your scanner comes with a multi-user license (6) for Presto! PageManager, an unlimited license for EPSON TWAIN HS Network and TWAIN HS, and a single-user license for PixTools QuickScan and the ISIS driver.
Page 86 5. Follow the instructions on the screen. If you’re installing EPSON TWAIN HS Network in order to use a GT-30000 scanner attached to another computer, you’ll see a window that asks for the Network Scanner Address (the scanner server’s IP address). Enter the IP address for the computer you want to connect to.
Page 87 Setting Up the Default Scanner on Windows 98 If you have more than one scanner connected to your computer and you’re running Windows 98, you can set up the EPSON GT-30000 as your default scanner. 1. Open the Windows Control Panel and...
Page 88 EPSON Scan is checked, and then click Server 4. Click to close the EPSON GT-30000 Properties window. The EPSON GT-30000 remains the default scanner until a different default scanner is selected. Network Scanning tab. Make sure Select...
Page 89: Installing The Scanner Server Software For Windows 95
Installing the Scanner Server Software for Windows 95 Follow the instructions in this section to install your EPSON GT-30000 scanner driver and other software on your scanner software CD-ROM. Before you begin, make sure you recalibrate your monitor to factory specifications. (See your monitor documentation for instructions.)
Page 90 4. When you see the window on the right, click Finish your computer. Continue with the instructions in the next section to install EPSON Scan Server and Acrobat Reader (if necessary). Network Scanning . Then . Then restart...
Page 91 Finishing the Scanner Server Installation on Windows 95 Before your computer can share its scanner, you must install EPSON Scan Server. At the same time, you can install other software that came with your scanner. Your scanner comes with a multi-user license (6) for Presto! PageManager, an unlimited license for EPSON TWAIN HS Network and TWAIN HS, and a single-user license for PixTools QuickScan and the ISIS driver.
Page 92 SCSI selected under Scanner Selection. If you’re installing EPSON TWAIN HS Network in order to use a GT-30000 scanner attached to another computer, you’ll see a window that asks for the Network Scanner Address (the scanner server’s IP address). Enter the IP address for the scanner server you want to connect to.
Page 93 If you want to share a different network scanner with the client computers, you can access the EPSON Scan Server window at any time by double-clicking the EPSON Scan Server icon in the Windows Control Panel. Then select the scanner you want in the Scanner Selection list.
Page 94: Installing The Scanner Server Software For Windows Nt
Installing the Scanner Server Software for Windows NT 4.0 Before your computer can share its scanner, you must install EPSON Scan Server. At the same time, you can install other software that came with your scanner. Your scanner comes with a multi-user license (6) for Presto! PageManager, an unlimited license for EPSON TWAIN HS Network and TWAIN HS, and a single-user license for PixTools QuickScan and the ISIS driver.
Page 95 GT-30000 Registration (as shown), click the application to clear the check mark. Then click Select EPSON TWAIN HS if you want to scan from the EPSON GT-30000 connected to your computer. Only install EPSON TWAIN HS Network if you want to access a network scanner connected to another computer.
Page 96: Changing The Scanner Server Start Up Mode
If you want to share a different network scanner with the client computers, you can access the EPSON Scan Server window at any time by double-clicking the EPSON Scan Server icon in the Windows Control Panel. Then select the scanner you want in the Scanner Selection list.
Page 97: Setting Up Client Computers
To change from Icon mode to Dialog Box mode, right-click the Scan Server icon on the taskbar and click Your setting takes effect when you exit and restart EPSON Scan Server. See page 97 for instructions on starting EPSON Scan Server.
Page 98: Installing Epson Twain Hs Network
“Installing the TCP/IP Protocol,” for instructions.) Installing EPSON TWAIN HS Network You must install EPSON TWAIN HS Network on the client computer before the client can use the network scanner. At the same time, you can install other software that came with your scanner. Your scanner comes with a multi-user license (6) for Presto! PageManager, an unlimited license for EPSON TWAIN HS Network and TWAIN HS, and a single-user license for PixTools QuickScan and the ISIS driver.
Page 99 If you want to deselect Acrobat Reader or the GT-30000 Registration (as shown), click the application to clear the check mark. Then click If you’re installing the scanner software on Windows 95 or Windows NT, click EPSON TWAIN HS to deselect it. EPSON TWAIN HS only works if the scanner is connected to your computer.
Page 100 Then click save your settings. If you need to connect to a different GT-30000 scanner or change the timeout setting, you can open the EPSON TWAIN HS Network window any time by double-clicking the EPSON TWAIN HS Network icon in the Control Panel.
Page 101 If you need to recalibrate your screen at a later time, double-click the EPSON TWAIN HS Network icon in the Control Panel to open the EPSON HS Network window. Then click the Screen Calibration Utility button at the bottom of the window.
Page 102: Using A Network Scanner
EPSON TWAIN HS Network to establish a connection to the scanner server. Only one client computer can access the scanner server at a time. (See “Starting EPSON TWAIN HS Network” on page 98 for instructions.) Choose your settings, then place your document on the scanner or in the automatic document feeder.
Page 103: Starting Epson Twain Hs Network
Wait until you see the message Waiting for connection If you installed EPSON TWAIN HS on the scanner server so that you could make a direct connection to the scanner, remember that you must exit EPSON Scan Server to use EPSON TWAIN HS. EPSON Scan Server disables EPSON TWAIN HS.
Page 104 Follow these steps: 1. Start your host application. 2. Select EPSON TWAIN HS Network as your source, or scanner driver. (You need to do this step only once.) For example, if you’re using Presto! PageManager for EPSON as your host...
Page 105: Starting A Scan
Starting a Scan You can start a scan on your network scanner in several ways. However, the client computer must be running EPSON TWAIN HS Network to connect to the scanner server. You can start EPSON TWAIN HS Network on the client computer from...
Page 106: Stopping A Scan In Progress
EPSON Scan Server dialog box. To break the connection between the client computer and the scanner server, click the button on the EPSON Scan Server dialog box. This closes EPSON Stop TWAIN HS Network on the client computer and allows other client computers to connect to the scanner server.
Page 107: Chapter 5 Maintaining And Transporting Your Scanner
This could permanently damage them. Never open the scanner case. Unplug the scanner and consult your dealer or contact EPSON if the power cord or plug is damaged, if liquid has entered the scanner, if the scanner has been dropped or the case damaged, or if the scanner does...
Page 108: Replacing The Fluorescent Lamp
READY ERROR replaced. Contact EPSON. (See “Where To Get Help” on page 118.) Never open the case of the scanner. If you think repairs or adjustments are necessary, consult EPSON.
Page 109: Chapter 6 Solving Problems
It also describes how to uninstall your software (if necessary), fix problems with the automatic document feeder, and get help from EPSON and other software manufacturers. For additional troubleshooting tips, see your electronic EPSON GT-30000 Reference Guide. Scanner Lights The tables below explain the lights on the scanner.
Page 110 Fatal error: Check that the transportation lock is released, and then turn the scanner off and on again. If this doesn’t solve the problem, call your EPSON dealer. Option error: There’s a problem with an installed option. Check to make sure the automatic document feeder is flat against the document table.
Page 111: Problems And Solutions
Problems and Solutions If you’re having problems, this section answers some of the most common questions. For additional software troubleshooting tips, see your electronic EPSON GT-30000 Reference Guide. Setup Problems Your system doesn’t recognize the scanner EPSON TWAIN HS (or EPSON TWAIN HS Network) doesn’t...
Page 112: Scanner Problems
You are unable to connect to the scanner when you click the button. Check to make sure your cable is securely connected to both the scanner and computer. Try a different cable. Try using a high quality, shielded SCSI cable, and be sure to restart your computer after you change the cable.
Page 113 For Windows Me, Windows 2000, or Windows 98, see “Testing Your Scanner’s Operation” on page 16. For Windows 95 or NT, open the EPSON TWAIN HS window (or EPSON TWAIN HS Network window) and click the button. Test Make sure you have enough memory to scan your image.
Page 114: Software Problems
READY If you have more than one scanner connected to your computer, make sure the GT-30000 is selected as your default scanner. For Windows Me, Windows 2000, or Windows 98, check the Utility tab on the GT-30000 Properties window.
Page 115 TCP/IP protocol. If more than one scanner is connected to the scanner server, make sure the GT-30000 is selected as the default scanner. The scanner software doesn’t work properly. Make sure the system...
Page 116: Scanning Problems
Scanning Problems The file size is too big. Adjust your scan settings. Try setting at a lower resolution (dpi), or scan only part of the image. Solving Problems Your scanned image is faint or has gaps. Check the brightness. Decrease the software or driver’s brightness setting.
Page 117 Your scanned image is blurred or distorted. Check the position and condition of your document. Make sure the document is placed flat against the scanner’s document table glass. If only part of the image is blurred, part of your document may be wrinkled or warped.
Page 118 Experiment with the Unsharp setting. Check or Mask uncheck the Unsharp Mask box in the EPSON TWAIN HS main window. Try different combinations of gamma and color settings in your scanner software. If you’re using the automatic document feeder, make sure it’s closed when scanning.
Page 119 Moiré (cross-hatch) patterns appear in the image when you perform halftone scanning. Make the image size slightly smaller. Use a transparent sheet between the document and the document table to defocus the image. Reposition the document on the document table. Try positioning the document at a slight angle.
Page 120: Uninstalling The Scanner Software
Uninstalling EPSON TWAIN HS Follow the procedure for uninstalling EPSON TWAIN HS on your system. Windows Me, Windows 2000, and Windows 98 1. Open the Windows Control Panel and double-click the icon.
Page 121: Uninstalling Epson Twain Hs Network
Uninstalling EPSON TWAIN HS Network 1. On the Start menu, click TWAIN HS Network Uninstall 2. When you’re finished, restart your computer. Uninstalling EPSON Scan Server 1. Click Start Programs Uninstall 2. When you’re finished, restart your computer. Programs EPSON Network Scanner...
Page 122: Solving Problems With The Automatic Document Feeder
Solving Problems with the Automatic Document Feeder This section gives you instructions for fixing paper jams and adjusting the scanning position for the automatic document feeder (ADF). Fixing Paper Jams 1. First open the ADF cover to determine where the paper jam occurred. 2.
Page 123: Changing The Document Feed Speed
3. If paper jams in the paper eject position, open the cover on the right and slowly pull out the jammed paper as shown. (Be careful not to pull too hard or the paper may tear, making it more difficult to remove.) 4.
Page 124: Where To Get Help
Proof of purchase (such as a store receipt) and date of purchase Computer configuration Description of the problem You can purchase supplies and accessories from the EPSON Store at (800) 873-7766, or visit www.epsonstore.com (U.S. sales only). In Canada, please call (800) 873-7766 for dealer referral.
Page 125: Software Technical Support
Software Technical Support Software Telephone EPSON TWAIN HS (562) 276-4382 (800) 922-8911 PixTools QuickScan (408) 325-3800 ISIS Driver NewSoft Presto! (510) 445-8616 PageManager Online and E-mail (800) 922-8911 http://support.epson.com fax-on-demand system (408) 232-9292 www.pixtran.com support@pixtran.com (510) 445-8601 www.newsoftinc.com Solving Problems...
Page 126 Solving Problems...
Page 127: Appendix A Installing The Tcp/Ip Protocol
Appendix A Installing the TCP/IP Protocol To use your EPSON GT-30000 as a network scanner, your client computers and scanner server must have a network interface card, a network interface card driver, and the TCP/IP protocol installed. In addition, both the client computers and the scanner server must have an IP address assigned.
Page 128: Installing The Tcp/Ip Protocol On Windows Me And Windows 2000
Installing the TCP/IP Protocol on Windows Me and Windows 2000 When running Windows Me or Windows 2000, your TCP/IP protocol should automatically be set correctly for the station it is installed on if you are not running a DHCP server. To check the protocol, follow these steps. 1.
Page 129: Installing The Tcp/Ip Protocol On Windows 98 And Windows 95
4. Make sure that Obtain an IP address is selected and click automatically (If you need to manually assign an IP address, contact your Network Administrator.) 5. Click to close the Local Area Connection Properties screen. 6. Click to close the Local Area Close Connection screen.
Page 130: Assigning An Ip Address For Windows 95 And Windows 98 (First Release)
5. Select Microsoft list, and TCP/IP Protocols list. Then click 6. Continue with the instructions in the next section to assign an IP address. Assigning an IP Address for Windows 95 and Windows 98 (First Release) If your network is connected to the Internet, ask your Internet provider or system administrator for a formal IP address.
Page 131 When you have your IP address, follow the steps below to assign it to your computer. 1. Select on the list of TCP/IP installed network components, and then click the Properties button. If necessary, click the tab. Address 2. Click Specify an IP address and then enter the IP address and subnet mask.
Page 132: Installing The Tcp/Ip Protocol On Windows Nt
Installing the TCP/IP Protocol on Windows NT 4.0 1. Open the Control Panel and double-click icon. If necessary, click the Network tab. Protocols 2. Check that TCP/IP Protocol the list of network protocols. If it appears in the list, go to “Assigning an IP Address on Windows NT 4.0”...
Page 133: Assigning An Ip Address On Windows Nt 4.0
Assigning an IP Address on Windows NT 4.0 If your network is connected to the Internet, ask your Internet provider or system administrator for a formal IP address. If your network is not connected to the Internet, you can use an IP address in the following ranges: 10.0.0.0 to 10.255.255.255, 172.16.0.0 to 172.31.255.255, or 192.168.0.0 to 192.168.255.255.
Page 134 Installing the TCP/IP Protocol...
Page 135: Appendix B Specifications
Maximum hardware resolution* 600 dpi (main scan) 1200 dpi with Micro Step Drive (sub scan) * The maximum hardware resolution of 600 1200 dpi is achieved using EPSON’s Micro Step Drive technology Speed (600 dpi, draft mode) Color: Grayscale: 0.39 msec/line (approx.)
Page 136 Digital halftoning 4 dither patterns (A, B, C, and D) for bi-level and quad-level data (2 downloadable dither patterns) Gamma correction 2 types for CRT display 3 types for printer 1 type user-defined Color correction 1 type for CRT display 3 types for printer (available in color byte sequence mode and color line sequence mode)
Page 137 SCSI Interface Interface type SCSI 2 and SCSI 3 Logic level TTL-compatible ID setting Selectable from 0 to 7 Terminator Internal terminator (enable/disable selectable) Connector select switch 68-pin connector 50-pin connector Connector type Micro DB 50-pin connector Micro DB 68-wide pin connector Initialization methods Hardware: Initialized when the scanner is turned on or the scanner...
Page 138 Automatic Document Feeder (B813212) General Paper input/output Load face up; eject face down Paper quantity 100 pages (80 g/m total thickness under 0.48 inches [12 mm]) Reliability 600,000 sheets (load/eject MCBF) Dimensions Width: 23.8 inches (606 mm) Depth: 19.2 inches (488 mm) Height: 5.3 inches (134 mm) Weight...
Page 139: Appendix C Notices
VGA color monitor with 640 480 resolution (a color monitor with a resolution of 800 600 or higher recommended) 8-bit, 256-color display adapter card (24-bit display adapter card with millions of colors recommended) Existing network with TCP/IP support for GT-30000 network scanning...
Page 140: Important Safety Instructions
Important Safety Instructions Read all of these instructions and save them for later reference. Follow all warnings and instructions marked on the scanner. Unplug the scanner before cleaning. Clean with a damp cloth only. Do not spill liquid on the scanner.
Page 141: Declaration Of Conformity
Declaration of Conformity According to 47CFR, Part 2 and 15 for Class B Personal Computers and Peripherals; and/or CPU Boards and Power Supplies used with Class B Personal Computers: EPSON AMERICA, INC. Located at: MS 3-13 3840 Kilroy Airport Way...
Page 142: Fcc Compliance Statement
FCC Compliance Statement For United States Users This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Page 143: Energy Star Compliance
EPSON warrants that the EPSON product is manufactured from new components and parts, or if you have purchased a refurbished product, like-new components and parts which perform like new and meet the EPSON standard of quality. For warranty service, you must provide proof of the date of original purchase.
Page 144 EPSON is not responsible for warranty service should the EPSON label or logo or the rating label or serial number be removed or should the product fail to be properly maintained or fail to function properly as a result of misuse, abuse, improper installation, neglect,...
Page 145: Index
Electrical requirements, 130 Electronic Reference Guide, 4 to 6 EPSON help, 118 to 119 Store, 118 EPSON Scan Server changing start up mode, 90 installing, 66 to 69, 71 to 74, 76 to 79, 82 to 86, 87 to 89 requirements, 64...
Page 146 90 installing TCP/IP, 121 to 127 requirements, 64 scanner address, 93 starting a scan, 98 starting EPSON Scan Server, 96 stopping a scan, 99 using the Start button, 98 Paper jams, fixing, 116 to 117 Photographs...
Page 147 READY light, 59, 102, 103 Registering your software, 8 Requirements electrical, 130 environmental, 130 system, 133 Resizing images, 55 Resolution choosing, 54 maximum, 129 Safety instructions, 134 Scaling images, 55 Scanner address, 93 connecting, 17 to 22 parts, 12 selecting source, 53 to 54 setting up, 9 software, uninstalling, 114 to 115 transporting, 102...
Page 148 Troubleshooting automatic document feeder, 109, 116 image quality, 110 to 113 scanner, 106 to 107 setup, 105 to 106 software, 108 to 109 testing the scanner, 16, 28, 34, 39 Uninstalling software, 114 to 115 Unlocking scanner, 13 Unpacking scanner, 10 to 11 Warranty, 137 Windows 2000 scanner software, installing, 30 to 35, 71 to...

This manual is also suitable for:

B106011f 30000 - gt - flatbed scanner Gt-30000n

Epson GT-30000 User Manual

Welcome

Chapter 1 Setting up Your Scanner

Chapter 2 Installing the Software

Chapter 3 How to Scan

Chapter 4 Network Scanning

Chapter 5 Maintaining and Transporting Your Scanner

Chapter 6 Solving Problems

Appendix A Installing the TCP/IP Protocol

Appendix B Specifications

Appendix C Notices

Index

Quick Links

Related Manuals for Epson GT-30000

Summary of Contents for Epson GT-30000

This manual is also suitable for:

Table of Contents