Page 1
System Release Notes Express5800/120Rc-2 System Release Notes PN: 455-01602-002...
Page 2
Since implementation by customers of each product may vary, the suitability of specific product configurations and applications must be determined by the customer and is not warranted by NEC Computers Inc. To allow for design and specification improvements, the information in this document is subject to change at any time, without notice.
Page 3
Express5800/120Rc-2 System Release Notes The Express5800/120Rc-2 System Release Notes provide up-to-date information on your system. These notes also provide additional valuable information about your system that was not included in the user’s guide. Please read these notes in their entirety.
TCP/IP addressing is required, TCP/IP must be reconfigured. Refer to Windows documentation for instructions. The Administrator Menu in the System Information Management segment of the Offline Maintenance Utility is accessible only by NEC authorized service representatives. EXPRESSBUILDER operates in floppy emulation mode. The emulated floppy drive portion of your system CD-ROM is designated Drive A and the remaining portion(s) of the CD-ROM is designated Drive Q.
Windows 2000 After installing Windows 2000, the Windows 2000 Device Manager may show an NEC GEM SCSI Processor Device and/or an Unknown Device under Other Devices. The Unknown Device is a reference to the baseboard management controller. Installing the ESMPRO Agent can clear both of these conditions.