hit counter script
Dell Alienware M11x R3 Service Manual
  1. Manuals
  2. Brands
  3. Dell Manuals
  4. Laptop
  5. Alienware M11x R3
  6. Service manual
Dell Alienware M11x R3 Service Manual

Dell Alienware M11x R3 Service Manual

Service manual
Hide thumbs Also See for Alienware M11x R3:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Manual
Alienware® M11x R3 Service Manual
Before You Begin
Base Cover
Battery Pack
Hard Drive
Memory Module(s)
Wireless Mini-Card(s)
Hinge Cover
Keyboard
Palm Rest Assembly
Status Light Board
Regulatory model: P06T series Regulatory type: P06T003
 Notes, Cautions, and Warnings
NOTE:
A NOTE indicates important information that helps you make better use of your computer.
CAUTION:
A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed.
WARNING:
A WARNING indicates a potential for property damage, personal injury, or death.
Information in this document is subject to change without notice.
© 2011 Dell Inc. All rights reserved.
Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc.; Alienware is a trademark or registered trademark of Alienware Corporation; Bluetooth is a
registered trademark owned by Bluetooth SIG, Inc. and is used by Dell under license; Microsoft, Windows, and the Windows start button logo are either trademarks or registered
trademarks of Microsoft Corporation in the United States and/or other countries.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any
proprietary interest in trademarks and trade names other than its own.
03 - 2011 Rev. A00
Power Button Board
Internal Card With Bluetooth Wireless Technology
Coin-Cell Battery
Display Assembly
I/O Board
System Board
Speakers
System Setup
Flashing the BIOS

Advertisement

Table of Contents
loading

Related Manuals for Dell Alienware M11x R3

Summary of Contents for Dell Alienware M11x R3

  • Page 1 Microsoft Corporation in the United States and/or other countries. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.

  • Page 2: Removing The Battery Pack

      Replacing the Battery Pack WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.   CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).
  • Page 3 Back to Contents Page  ...

  • Page 4: Before You Begin

    Use the following safety guidelines to help protect your computer from potential damage and to help to ensure your own personal safety. WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.   CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).

  • Page 5: Contacting Alienware

    For customers in the United States/Canada, call 1-800-ALIENWARE. NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product catalog. Dell provides several online and telephone-based support and service options. Because availability varies by country and product, some services may not be available in your area.

  • Page 6: Configuring The System Setup

    Back to Contents Page   System Setup Alienware® M11x R3 Service Manual   Configuring the System Setup  Configuring the System Setup The System Setup options allow you to:  Change the system configuration information after you add, change or remove any hardware in your laptop.  Set or change a user-selectable option.
  • Page 7   Advanced Menu Allows you to enable or disable the Intel SpeedStep technology. Disabling this feature may improve performance, but will greatly Intel SpeedStep reduce battery life. Allows you to enable or disable the Intel Virtualization technology. Virtualization Allows you to enable or disable the USB emulation feature. This feature defines how the BIOS, in the absence of a USB-aware USB Emulation operating system, handles USB devices.
  • Page 8 Allows you to set the service tag of your computer, if a service tag has not already been set. Set Service Tag Allows you to set the supervisor password. The supervisor password controls access to the system setup utility. Set Supervisor Password Allows you to set the user password.

  • Page 9: Removing The Base Cover

      Replacing the Base Cover WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.   CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).

  • Page 10: Internal Card With Bluetooth Wireless Technology

      Replacing the Bluetooth Card WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.   CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).
  • Page 11   2. Align the connector on the Bluetooth card with the connector on the system board and press gently.   3. Replace the screw that secures the Bluetooth card to the system board.   4. Replace the palm rest assembly (see Replacing the Palm Rest Assembly).

  • Page 12: Removing The Coin-Cell Battery

      Replacing the Coin-Cell Battery WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.   CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).
  • Page 13   2. Use the adhesive on the coin-cell battery and adhere it to the system board.   3. Connect the coin-cell battery cable to the connector on the system board.   4. Replace the palm rest assembly (see Replacing the Palm Rest Assembly).

  • Page 14: Removing The Display Assembly

      Replacing the Display Assembly WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.   CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).

  • Page 15: Replacing The Display Assembly

    13. Remove the four screws that secure the display assembly to the computer base. screws (4) display cable connector   14. Gently slide the Mini-Card antenna cables out through the slot on the computer base. Mini-Card antenna cables   15. Lift the display assembly off the computer.  Replacing the Display Assembly  ...
  • Page 16   12. Replace the battery pack (see Replacing the Battery Pack).   13. Replace the base cover (see Replacing the Base Cover).   CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer.

  • Page 17: Flashing The Bios

    Alienware® M11x R3 Service Manual   1. Turn on the computer.   2. Go to support.dell.com/support/downloads.   3. Locate the BIOS update file for your computer: NOTE: The Service Tag for your computer is located on a label at the bottom of the computer.

  • Page 18: Removing The Hard Drive

    Dell or Alienware does not guarantee compatibility or provide support for hard drives from sources other than Dell. NOTE: If you are installing a hard drive from a source other than Dell or Alienware, you need to install an operating system, drivers, and utilities on the new hard drive.

  • Page 19: Replacing The Hard Drive

    7. Remove the four screws that secure the hard-drive bracket to the hard drive.   8. Lift the hard-drive bracket away from the hard drive. screws (4) hard-drive bracket hard drive   9. Disconnect the interposer from the hard drive. interposer hard drive  ...
  • Page 20 CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer.   11. Install the operating system for your computer, as needed.  ...

  • Page 21: Removing The Hinge Cover

      Replacing the Hinge Cover WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.   CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).
  • Page 22   5. Replace the base cover (see Replacing the Base Cover).   CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer. Back to Contents Page  ...

  • Page 23: Removing The I/O Board

      Replacing the I/O Board WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.   CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).

  • Page 24: Replacing The I/O Board

     Replacing the I/O Board   1. Follow the instructions in Before You Begin.   2. Align the connectors on the I/O board with the slots on the computer base.   3. Use the pull-tab to align the connector on the I/O board with the connector on the system board and press gently.  ...

  • Page 25: Removing The Keyboard

      Replacing the Keyboard WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.   CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).

  • Page 26: Replacing The Keyboard

    screws (2) keyboard tabs (5) palm rest assembly   10. Carefully lift the keyboard and slide the keyboard tabs out of the slots on the palm rest.   11. Carefully turn the keyboard over and place it on the palm rest.  ...
  • Page 27   10. Follow the instructions from step 6 step 8 Replacing the Hard Drive.   11. Replace the battery pack (see Replacing the Battery Pack).   12. Replace the base cover (see Replacing the Base Cover).   CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer.

  • Page 28: Removing The Status Light Board

      Replacing the Status Light Board WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.   CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).

  • Page 29: Replacing The Status Light Board

    status light board screws (5)  Replacing the Status Light Board   1. Follow the instructions in Before You Begin.   2. Place the status light board on the palm rest assembly and replace the five screws that secure the status light board to the palm rest assembly.  ...

  • Page 30: Removing The Memory Module(S)

    You can increase your computer memory by installing memory modules on the system board. See "Specifications" in your Mobile Manual for information on the type of memory supported by your computer. NOTE: Memory modules purchased from Dell or Alienware are covered under your computer warranty. Your computer has two user-accessible SODIMM connectors.  Removing the Memory Module(s)  ...
  • Page 31   2. Align the notch in the memory module with the tab in the memory- module connector.   3. Slide the memory module firmly into the connector at a 45-degree angle, and press the memory module down until it clicks into place. If you do not hear the click, remove the memory module and reinstall it.

  • Page 32: Wireless Mini-Card(S)

    NOTE: Dell or Alienware does not guarantee compatibility or provide support for Mini-Cards from sources other than Dell or Alienware. If you ordered a wireless Mini-Card with your computer, the card is already installed. Your computer supports two Mini-Card slots:  One full Mini-Card slot —...

  • Page 33: Replacing The Mini-Card(S)

      8. Install the drivers and utilities for your computer, as required. NOTE: If you are installing a Mini-card from a source other than Dell or Alienware, you must install the appropriate drivers and utilities. Back to Contents Page  ...

  • Page 34: Removing The Palm Rest Assembly

      Replacing the Palm Rest Assembly WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.   CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).

  • Page 35: Replacing The Palm Rest Assembly

    status light board cable connector screws (3) touch pad cable connector   12. Using a plastic scribe carefully pry out the palm rest assembly along the rear edge and then ease the palm rest assembly from the computer base.   13.
  • Page 36 6. Replace the keyboard (see Replacing the Keyboard).   7. Replace the hinge cover (see Replacing the Hinge Cover).   8. Close the display and turn the computer over.   9. Replace the nine screws that secure the palm rest assembly to the computer base.  ...

  • Page 37: Removing The Power Button Board

      Replacing the Power Button Board WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.   CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).
  • Page 38 2. Place the power button board on the palm rest assembly and replace the two screws that secure the power button board to the palm rest assembly.   3. Replace the status light board (see Replacing the Status Light Board).  ...

  • Page 39: Removing The Speakers

      Replacing the Speakers WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.   CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).

  • Page 40: Removing The System Board

      Entering the Service Tag in the BIOS WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.   CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).

  • Page 41: Replacing The System Board

    system board screws (4)   16. Carefully ease the connectors on the system board out of the slots in the computer, and lift the system board off the computer base.  Replacing the System Board   1. Follow the instructions in Before You Begin.

  • Page 42: Entering The Service Tag In The Bios

     Entering the Service Tag in the BIOS   1. Ensure that the AC adapter is plugged in and that the main battery is installed properly.   2. Turn on the computer.   3. Press <F2> during POST to enter the system setup program.  ...

Table of Contents