Related Manuals for Kenmore 721.21295
Summary of Contents for Kenmore 721.21295
- Page 1 Owner's Manual Manual del Propietario ® Canister Vacuum Cleaner Aspiradora Model, Modelo 721.21295 Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A www.sears.com PART No. 3828FI3763K Printed in KOREA...
- Page 2 Performance Features ........10 Changing The Dust Bag ......Please read this guide, tt will help you assemble and operate your new Kenmore vacuum in the safest and most effective way. For more informalion about the care and o_ratJon, call your nearest Sears store.
- Page 3 Your safety is important to us. To reduce the risk of fire, electrical sh_k, injury to persons or damage when using your vacuum cleaner, follow basic safety precautions including the following: Read this manual before assemblingor using your Do not operatethe cleaner with a punctured hose. vacuum deaner.
- Page 4 It is important to know your vacuum cleaner's parts and features to assure its proper and safe use, Review these before using your clea_r, Sli_ Switch Power=Mate _ ONJOFF Switch Holder Cord C_rd Holder Wand Storage Clip Telescopic Wand 3ord Reel Wand B_Jtton Button Performance indicator...
- Page 5 Before assembling your vacuum cleaner, 3. Connect Power Cord Plug to top of wand as _re you have all the parts shown in PARTS shown, DO NOT force. Raised side of plug AND FEATURES. must face out TELESCOPIC WAND HoEdspring latch and pull out or _sh inw_d to required length, Spnng La_i_...
- Page 6 ATTACHMENTS 3. Check to see that the motor safety filter is propady installed. See CLEANING MOTOR Clamp Accessory Holder around Telescopic SAFETY FILTER for instructions, Wand as shown °! Motor Safe_y _ iiio HOSE 1. Insert hose into canister un_l it snaps into place, Be sure hose is not twisted, To remove hose: Pushfitting hook down and pull out,...
- Page 7 4. Push slide switch forward toward MAX for max suction, backward loward MIN for Iess suction, PersonalInjuryandProductDamageHazardl , DO NOTplugin if switchis in ON position, Personalinjuryor productdarn_e couldresu_. • Thecordmovesr_idly whenrewinding, Keepchi_renawaya_ provide a clearpathwhen rewinding thecordtopreventpersonal i njury, • DO NOTuse ou_etsabovecounters_ Damageto items in surrounding areacouldoccur, 5 To turnon Power-Mate_ press the Power-Mate* ON/OFF switch downward.
- Page 8 DO NOT attach or remove handle or To prevent tip-over, never leave Power-Mate_ wands while cleaner is ON, This could ON in the upright position, cause sparking and damage the electrical 2, Remove Power-Mate s plug from holder contacts, Press Wand button, then pull to remove wand from Power-Mate _.
- Page 9 SANI-PUNCH NOZZLE Blankets and Sheets This Sani_Punch nozzle is for effective cleaning t is easierte of mattresses, light blankets, sheets and drapes to remove mites and dust, Features The bottom part of the nozzle can b.e separated to be cteaned. Since the bosom does not stick to the surface, vacuuming is easy.
- Page 10 Suggested sweeping pa_ern Carpeted stairs need to be vacuumed For best cleaning action, tile Power-Mate _ regularly. For best cleaning results, put the sflde switch on MAX should be pushed straight away from you and pulled straight back. This pattern should be continued across the rug For best cleaning results, keep the airflow with slow, gliding motions.
- Page 11 For bee'[ cleaning results, the dust bag should Bag Mt}u_/t Tab changed often, 1_Unplug cord from wall out_et, 2. Pull lid release out and up, then lift canister bo_. 3. Press bad_ the bag mount latch. 6 Close and latch canister hood, NOTE: The vacuum ks fitted with a safety -../ device which prevents you from dosing the...
- Page 12 1. Unplug cord from wal_outlet. DO NOT drip water on cleaner. 2, Clean vacuum exterior using a clean, soft DO NOT use attachments if they are wet, cloth that has been dipped in clean water, Dam_e to dust bag and motor may occur, then wrung out.
- Page 13 Use the brush/crevice toe[ attachment to vacuum clean the Sani°Punch nozzle. £ottom Fellow the instructions below for washing the Sani-Punch bottom pla[e. (Do not soak the entire body of the vacuum nozzle in water; it may cause the vibrator to malfunction ) 1.
- Page 14 Always follow a ll s afety precautions when cieaning and servicing the Power-Mate Electrical Shock or Personal injury Hazard Disconnect electrical supply before servicing or cleaning the unit. Failure to do so could result in electrical shock or personal injury from cleaner suddenly starting.
- Page 15 TO REPLACE BELT: 4. Line up tabs on cover with slots inside the base. 1. Install brush supports onto brush assembly. ¢ Cover Tab Base Slot 2, _nstall new belt in _lt groove on the brush assemHy, then over #_emotor shaft, Be sure 5.
- Page 16 TO REPLACE BRUSHES: 1. Remove Power_Mate _ cover, belt and brush assembly. See "To remove b_olt'in BELT CHANGING AND BRUSH CLEANING, Electrical Shock or Personal injury Hazard Disconnect electrical supply before 2. Remove brush supports from ends of brush servicing or cleaning the unit. Failure to do assembly.
- Page 17 Review this chart tofind do-ibyourself solutions for m inor performance p'obIems, Any other service needed should beperformed by aSears oror.her quaJified service representative. Bectrical Shock Hazard Disconnect electrical supply before servicing or cleaning the unit. Failure to do so could result in electrical shock or personal injury. PROBLEM POSSIBLE CAUSE...
- Page 18 VACUUM CLEANER PARTS For Model: 721.21295000 --19 -18-...
- Page 19 Power-Mate _ PARTS For Model 721.21 295000 o19_...
- Page 20 VACUUM CLEANER PARTS For Model: 721.21295000 Illust. Illust Part No. DESCRIPTION DESCRIPTION 3550FI1551K Filter Cover 4036FI3036A Terminal Packing 4036FI4074A Indicator Seal 4441FI3605J Caster Ass'y 3123019L Indicator 4122017F Roller 3550FI3307G indicator Cover 1TPL0403318 Borew 4*20 1TPLD302818 Screw 3'12 4660F11114D Wheel Body 4660FI3238N Wl_eel Cover 4970FI4260A...
- Page 21 HOSE AND A ACHMENTS PARTS For Model: 721.21 295000 Illu_. Illust Part No, DESCRI PTIC¢4 Part No, DESCRIPTION 5215FI1316A 3123013P Hose Aos'y Fitting Hook 3650FI1484A 5201 Fil002A Gdp H_dle-R Tele_pic Wand 3550FI2469A 5248F1225_ Grip H_dle Cover Upholstery Nozzle 4940FI3727A Control Knob 3122005N BrusWCrevice Tool...