Advertisement
Quick Links
TNX22BRCWW - GE Profile Performance
Case Dimensions (in inches/cm.)
69-7/8
70-7/16
Front View
Specification Revised 10/99
™
21.7 Cu. Ft. CustomStyle
36-5/8
35-3/4
23-3/4
26-3/4
Top View
VOLUME and
SHELF AREA
Manufacturer Certified to
ASSOCIATION OF HOME
APPLIANCE MANUFACTURERS
ANSI/AHAN HRF-1-1979
™
No-Frost Top-Freezer Refrigerator with Dispenser
Clearances
Handle Side Clearance
–At least 2" (51 mm) on the handle side for fingertip clearances.
Top and Bottom Clearance
–At least 3/16" (4.75 mm) at the top and bottom edges to allow for
trim flange.
Hinge Side Clearance
• A 3/4" (19 mm) thick door panel may strike thje adjacent countertops
when the door is fully opened. Therefore, the hinge side clearance to
raised panel will vary according to installation situation.
–Allow 1-3/4" (44 mm) clearance when installation does not include
side panels.
28-3/8
–The installation of 3/4" (19 mm) thick side panels requires less
clearance because the space between the door and adjacent
countertop is wider.
• To avoid door contact to countertop consider:
61
–Miter the corner of the adjacent countertops 45°, or
–pull the refrigerator forward enough to avoid contact.
IMPORTANT: Before finalizing specifications for your GE Profile Performance
CustomStyle
™
Refrigerator, Please NOTE:
• A minimum of 36" is required for refrigerator installation
• Be sure to allow for 1/2" or 3/4" side panels in addition to the 36" minimum
For answers to your Monogram,
GE Profile Performance Series,
GE Profile
™
or GE appliance questions, call
GE Answer Center
Total volume and shelf
area are calculated by the
Listed by
Association of Home
Underwriters
Appliance Manufacturers'
Laboratories
R
standards.
®
™
service, 800.626.2000.
®
®
C
US
™
Advertisement
Related Manuals for GE GE Profile Performance CustomStyle TNX22BRCBB
Summary of Contents for GE GE Profile Performance CustomStyle TNX22BRCBB
- Page 1 • To avoid door contact to countertop consider: –Miter the corner of the adjacent countertops 45°, or –pull the refrigerator forward enough to avoid contact. IMPORTANT: Before finalizing specifications for your GE Profile Performance CustomStyle ™ Refrigerator, Please NOTE: •...
- Page 2 TNX22BRCWW - GE Profile Performance Rough-In Dimensions (in inches) Standard, New Construction and Replacement Installation Installation Tips to Maximize the Built-In Look •All wall/floor moulding should be removed prior to installation. •Water recess on rear wall recommended to prevent water line damage.
- Page 3 An enclosure is required to match up to the trim, see Typical Installation. To obtain the most integrated look, the cabinet or soffit above the refrigerator should extend out to the same depth as the side panels. The refrigerator opening must have minimum dimensions of 70-1/4"...
- Page 4 TNX22BRCWW - GE Profile Performance ™ 21.7 Cu. Ft. CustomStyle ™ No-Frost Top-Freezer Refrigerator with Dispenser Features and Benefits • 21.7 cu ft Capacity (Fresh Food 15.4 cu ft / Freezer 6.3 cu ft) • LightTouch! Dispenser Delivers Chilled Water, Cubed and Crushed Ice Through the Door •...