CONTENTS Instructions for the user Instructions for the installer Important Safety Instructions Technical specifications Description of the Appliance Installation Positioning Operation Electrical Connection Before use Freezer controls Building-in instructions Starting your appliance Temperature control Door Reversal Warning light (red) Building the appliance in under a worktop Freezing fresh food Fitting the plinth Frozen food storage...
IMPORTANT SAFETY INSTRUCTIONS These warnings are provided in the interests of your safety. Ensure that you understand them all before installing or using this appliance. Your safety is of paramount importance. If you are unsure about any of the meanings of these warnings contact the Customer Care Departement. Prior to Installation During Use Check the appliance for transport damage.
DESCRIPTION OF THE APPLIANCE Freezer calendar Freezer control Frozen food storage Freezing fresh food OPERATION Before use Remove all securing tapes. Wash inside the appliance with lukewarm water and bicarbonate of soda (5 ml to 0.5 litre of water). Do not use soap or deter- gent as the smell may linger.
Starting your appliance Distribute the frozen food packages in the other Insert the plug into the wall socket. The appliance can be activated/deactivated by pressing the compartments, so that the top compartments can be ON/OFF button.When the pilot light is illuminated used for a further freezing operation.
Thawing Ice making Deep frozen or frozen food, prior to being used, can Fill the ice tray with water to the top of each ice be thawed in the fridge or at room temperature cube compartment, and place it in the freezer. To depending on the time available.
DEFROSTING The freezer compartment will become progressively Important covered with frost. This should be removed with the In the event of a power failure causing special plastic scraper provided, whenever the thick- the temperature within your freezer to ness of the frost exceeds 1/4". rise, do not re-freeze the food without During this operation it is not necessary to switch off checking its condition.
MAINTENANCE AND CLEANING Before any maintenance or cleaning work is carried out, DISCONNECT the appliance from the ELEC- TRICITY supply. Warning This appliance contains hydrocarbons in its cooling unit maintenance and recharging must therefore only be carried out by authorised technicians. Internal cleaning Clean the inside and accessories with warm water and bicarbonate of soda (5ml to 0.5 litre of water).
SOMETHING NOT WORKING? Before contacting your local Service Force Centre check the following points. IMPORTANT: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is under guarantee. Symptom Solution No power to the appliance...
SERVICE AND SPARE PARTS In the event of your appliance requiring service, or if you wish to purchase spare parts please contact your local Electrolux Service Force Centre by telephoning: 0870 5 929929 Your telephone call will be automatically routed to the Service Centre covering your post code area.
GUARANTEE CONDITIONS Standard guarantee conditions We, Electrolux, undertake that if within 12 months of the date of purchase this Electrolux appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition that: The appliance has been correctly installed and used only on the electricity supply stated on the rating plate.
TECHNICAL SPECIFICATIONS DIMENSIONS Height 81,5 Width 59,6 Depth 53,8 POWER SUPPLY VOLTAGE AND FREQUENCY 220-240 V / 50 Hz TOTAL POWER ABSORBED 90 W AVERAGE DAILY UNITS ELECTRICITY(*) 0,78 kWh GROSS CAPACITY 108 l NET CAPACITY 100 l STAR RATING (*)This figure is based on standard test results in accordance with European Standard EN153.
ELECTRICAL CONNECTION This appliance complies with the E.E.C. WARNING: Directive No. 87/308 of 2.6.87 relative to radio THIS APPLIANCE MUST BE EARTHED. interference suppression. The manufacturer declines any ilability This appliance complies with the following should this safety measure not be E.E.C.
BUILDING-IN INSTRUCTIONS Before carrying out any work, remove the plug from the power socket. Door Reversal Left door opening: 1. Remove the grid from the appliance pulling it towards you with hands. 2. Remove the left side (A) of the grid cutting it from the rear (see figure).
Page 17
To reverse the opening direction of the door, proceed as shown in the figures: Attention After competion of the door reversal opera- tion, verify that the door gasket is sealing onto the cabinet.
Building the appliance in under a worktop The dimensions of the recessed installation area must correspond with those indicated in the figure. DO013 Remove covering and adjusting strips. Push the appliance into place. The plug socket neces- sary for connection of the appliance to the electricity supply should be positioned, so that the plug is not placed in the recess.
Page 19
To mount the furniture door proceed as shown in the figures:...
Page 20
Screw appliance into place. Place the covering strip.
Fitting the plinth Important For the efficient operation of the appliance, it is important that the original ventilation grid is used. For an opening height dimension A=820 mm and a plinth height dimension a=100 mm, the plinth may be fitted without adjustments. The same applies to an opening height dimension B=870 mm and a plinth height dimension b=150 mm.