Table of Contents
Advertisement
____________________________________________________________________________________
Special Function
CLEAN AIR function (on some models)
Improving the quality of indoor air is one of the mission of an air conditioner. This air
conditioner is equipped with ionizer or Plasma Dust Collector (Depending on
specific configuration of the model). With the anions generated by Ionizer, the air
circulation of the air conditioner fills the room with refreshing, natural and healthy
air. The Plasma Dust Collector generates an high voltage ionization zone, through
which the air is converted to plasma. Inside the air most of the dust, smoke, and
pollen particles are captured by the electrostatic filter.
SELF CLEAN function
Function used after the Shut Down of cooling operation to clean the Evaporator
and keep it as fresh for the next operation.
The unit will operate as following sequence:
FAN ONLY mode at Low fan speed--Heating operation with LOW fan speed(applicable to
cooling & heating models only) ---FAN ONLY operation--Stop Operation---Turn off.
Note:
This function is only available under COOL (AUTO COOL, FORCED COOL)
and DRY mode.
Before select the function, it is recommended to run the air conditioner under
Cooling operation for about half an hour. Once the Self Clean function is activated,
all TIMER settings will be cancelled.
During Self Cleaning operation, when press the SELF CLEAN button on the
remote controller again will stop the operation and turn off the unit automatically.
Follow Me function
The remote control serves as a remote thermostat allowing for the precise
temperature control at its location.
To activate the Follow Me feature, point the remote control towards the unit and
press the Follow Me button. The remote display is actual temperature at its location.
The remote control will send this signal to the air conditioner every 3 minutes
interval until press the Follow Me button again. If the unit does not receive the
Follow Me signal during any 7 minute interval, the Follow Me mode will be cancelled
automatically.
Anti-mildew function (on some models)
When turns off the unit on COOL, DRY, AUTO (Cool) mode, the air conditioner
will continue operating for about 10 minutes(depending on models) at LOW fan
speed.
This will help to dry up the condensed water inside the evaporator, and prevent the
breeding of mildew.
Under Anti-mildew operation, do not restart the air conditioner until the unit is
completely off.
9
Hide quick links:
Advertisement
Table of Contents
