Page 1
LC - 19D1E LC-19D1S LCD COLOUR TELEVISION LCD-FARBFERNSEHGERÄT TÉLÉVISEUR COULEUR À ÉCRAN CRISTAUX LIQUIDES (LCD) TELEVISORE A COLORI LCD LCD-KLEURENTELEVISIE TELEVISIÓN EN COLOR LCD OPERATION MANUAL BEDIENUNGSANLEITUNG MODE D’EMPLOI MANUALE DI ISTRUZIONI GEBRUIKSAANWIJZING MANUAL DE MANEJO...
Page 2
SPECIAL NOTE FOR USERS IN THE U.K. The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 13A fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked and of the same rating as above, which is also indicated on the pin face of the plug, must be used.
Dear SHARP customer Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of trouble- free operation of your product, please read the Important Safety Precautions carefully before using this product. Important Safety Precautions •...
Quick guide Attaching the stand Before performing work spread cushioning over the base area to lay the TV on, making sure the area is completely flat. This will prevent it from being damaged. Before attaching (or detaching) stand, unplug the AC cord from the AC INPUT terminal. Soft cushion Confirm the 3 screws supplied with the TV.
Quick guide Inserting the batteries Before using the TV for the first time, insert two “AA” size batteries (supplied). When the batteries become depleted and the remote control unit fails to operate, replace the batteries with new “AA” size batteries. Hold in the tab on the battery cover and pull the cover towards the direction of the arrow.
Quick guide Remote control unit B (Standby/On) AV MODE Select an audio and video setting. Enter standby mode or turn on the (See page 10.) power. e (Mute) p (Display information) Switch the sound on and off. (See pages 23 and 24.) K (Sound mode) DTV MENU Select the sound multiplex mode.
Quick guide TV (Front/Side view) a Power button MENU button b (Input Source) button P (r/s) (Channel buttons) i (e/f) (Volume buttons) Operation without a remote control unit TV control panel buttons Remote control buttons OPC indicator B (Standby/On) indicator OPC sensor Remote control sensor TV (Rear view)
Quick guide You do not need to do anything during the auto search. Turning on the power When the Power of the TV is OFF (B indicator is off), Press a on the TV. The setup menu disappears and you can watch the programme on channel 1.
Using external equipment Setting the input source To view external source images, select the input source using b on the remote control unit or TV. NOTE • The cables marked with * are commercially available items. Connecting a DVD player Connecting a VCR You can use the EXT 1, 2, 3 or 4 (HDMI) terminals You can use the EXT 1 terminal when connecting a...
Using external equipment Connecting a PC Use the EXT 5 terminals to connect a PC. EXT 5 EXT 5 ø 3.5 mm stereo minijack cable* ø 3.5 mm stereo minijack cable* RGB cable* RGB/DVI conversion cable* NOTE • The PC input terminals are DDC1/2B-compatible. •...
Menu operations TitleB AV Mode AV Mode gives you several viewing options to choose Menu Operation: A (page 9) from to best match the surrounding environment of the Automatically adjust the brightness of the screen. TV, which can vary due to factors like room brightness, type of programme watched or the type of image input Item from external equipment.
Menu operations C. M. S. (Colour Management System) I/P Setting Colour tone is managed using the six-colour Adjust the image and input signal can give you a more adjustment setting. beautiful picture. Item Item C. M. S.-Hue: This is a standard to adjust the colour Interlace: Display finely detailed images for TV or video, either more reddish or more bluish in tone.
Menu operations Power Control menu Setup menu Power Control Setup No Signal Off Auto Installation No Operation Off Programme Setup Power Management Child Lock Input Label No Signal Off TV/AV only Position PC Setup Menu Operation: A (page 9) HDMI Audio Select When set to “Enable”...
Menu operations Auto Search Colour sys. You can automatically search for and download TV Select the optimum colour systems to receive. (AUTO, channels by performing the procedure below. This is PAL, SECAM) the same function as from programme auto search to NOTE auto sorting in Auto Installation.
Menu operations Sort Resetting the PIN Allows you to reset your PIN to the factory preset Channel positions can be sorted freely. “1234”. Repeat steps 1 to 4 in Programme Setup. Repeat steps 1 to 3 in Changing the PIN. Press a/b to select “Yes”, and then press OK.
Menu operations PC Setup HDMI Audio Select For adjusting a PC image. Menu Operation: A (page 9) • Only “H-Pos.” and “V-Pos.” in “Fine Sync.” are available Select “Digital” for audio signal via the HDMI terminal. when the HDMI-PC input (see page 1) is selected. Select “Analogue”...
Menu operations Rotate Input Select Menu Operation: A (page 9) Menu Operation: A (page 9) You can set the orientation of the picture. For setting the signal type for EXT 1 only. The signal type for EXT 2, EXT 3 and EXT 5 is fixed (Normal): normal image (Mirror): mirror image and cannot be changed.
Useful features WIDE MODE WIDE MODE PC only TV/DTV/AV only You can select the picture size. Selectable picture size You can select the picture size. varies with the type of signal received. Press f. Item (for SD (Standard-Definition) signal) • The WIDE MODE menu displays. Normal: For 4:3 “standard”...
Useful features Button functions Teletext function Buttons Description What is Teletext? Teletext broadcasts pages of information and P (r/s) Increase or decrease the page number. entertainment to specially equipped television sets. Colour (Red/ Select a group or block of pages displayed in the News, weather and sports information, stock exchange Green/Yellow/ coloured brackets at the bottom of the screen by...
DTV menu operations Programme Setup About using the character set screen Configure various settings for each service. Press the In some cases you may be prompted to enter preassigned 1–9 numeric buttons to access each of characters. See below for details. the functions explained below.
DTV menu operations Move Select Sort the order of the selected service by moving the Use this function to jump to the specific service in one service position. step. This is useful when there are many services displayed on screen to scroll through. Press 3 on the remote control.
DTV menu operations System Setup Press a/b to select “Carrier Scan”, and then press OK. Configure On-Screen Display and Child Lock settings. If you have already set the PIN, enter it here. If not, enter the factory preset PIN “1234”. OSD Setup Channel The On-Screen Display appearance and the position/...
DTV menu operations NOTE Accessories • To scan all carriers for upgrade availability, perform the manual upgrade. Check the version information of the digital module • The software upgrade may take about 30 minutes, but and allow it to be upgraded (when available). may take longer (up to 1 hour) depending on the signal status.
Useful features (DTV) About EPG Using the EPG Timer When the Timer is set, the TV automatically tunes to a With the Electronic Programme Guide (EPG), you can preset TV event when its on-air time begins. check the schedule of DTV and Radio events, view detailed information about them, tune to an event Press EPG.
Useful features (DTV) Service banner Using the digital programme list Select services by using the Programme List instead of using 0–9 numeric buttons or P (s/r). BBC 1 07:45 Press OK when no other menu screen is displayed. 07:00 08:00 04/11/2005 Business news MHEG...
Appendix Troubleshooting Problem Possible Solution • Check if you pressed B on the remote control unit. (See page 7.) • No power. If the indicator on the TV lights up red, press B. • Is the AC cord disconnected? (See page 3.) •...
Appendix Commands RS-232C port specifications CONTROL ITEM COMMAND PARAMETER CONTROL CONTENTS POWER SETTING PC Control of the TV POWER OFF (STANDBY) INPUT SELECTION A INPUT SWITCHING (Toggle) When a program is set, the TV can be controlled from the PC TV (CHANNEL FIXED) using the RS-232C terminal.
0°C to e40°C • As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.
If the product is used for business purposes and you want to discard it: Please contact your SHARP dealer who will inform you about the take-back of the product. You might be charged for the costs arising from take-back and recycling. Small products (and small amounts) might be taken back by your local collection facilities.
Page 32
Printed in Spain Gedruckt in Spanien Imprimé en Espagne Printed on environmentally friendly paper Stampato in Spagna Auf ökologischem Papier gedruckt Gedrukt in Spanje Imprimé sur papier écologique Impreso en España Stampato su carta ecologica TINS-D222WJZZ Afgedrukt op ecologisch papier Impreso en papel ecológico 08P06-SP-NG...