Related Manuals for Husqvarna 532RBS
Summary of Contents for Husqvarna 532RBS
- Page 1 Operator´s manual 532RBS 542RBS Please read the operator’s manual carefully and make sure you English understand the instructions before using the machine.
-
Page 2: Table Of Contents
SAFETY FIRST Instructions contained in warnings within this manual marked with a symbol concern critical points which must be taken into consideration to prevent possible serious bodily injury, and for this reason you are requested to read all such instructions carefully and follow them without fail. -
Page 3: Warning Labels On The Machine
1. Warning labels on the machine (1) Read owner’s manual before operating this machine. (2) Wear head, eye and ear protection. (3) Wear foot protection. (4) Wear gloves. (5) Beware of thrown objects. (6) Warning / Attention (7) Keep all children, bystanders and helpers 15 meters away from the machine. IMPORTANT If warning label peels off or becomes soiled and impossible to read, you should contact the dealer from which you purchased the product to order new labels and affix them in... -
Page 4: Symbols On The Machine
Position: FUEL TANK CAP (b) The direction to close the choke Position: AIR CLEANER COVER (c) The direction to open the choke Position: AIR CLEANER COVER 3. Specifications HUSQVARNA Backpack Brushcutter Name/Type 532RBS 542RBS Machine Weight ( ø Applied Head 2-teeth blade(12”), 4-teeth blade, 8-teeth blade, round saw blade(10”), line head... -
Page 5: Safety Precautions
4. Safety precautions 2. Never use the product, 1. Read this manual carefully until you (1) When the ground is slippery or when completely understand and follow all you can’t maintain a steady posture. safety and operating instructions. (2) At night, at times of heavy fog, or at 2. - Page 6 HUSQVARNA person sufficient to ensure safety. servicing dealer for repair. 2. Check the condition of working area to...
- Page 7 4. Safety precautions HANDLING FUEL IF SOMEONE COMES 1. The engine of the HUSQVARNA product is 1. Guard against hazardous situations at designed to run on a mixed fuel, which all times. Warn adults to keep pets and contains highly flammable gasoline.
- Page 8 4. Safety precautions This contact causes the blade to stop for an instant and then suddenly move or ”bounce” away from the object that was hit. The operator can lose control of the unit and the blade can cause serious personal injury to the operator or any person nearby if the blade contacts any part of the body.
-
Page 9: Set Up
5. Set up insert the liner into the clutch housing, being careful WARNING to make sure that the hole on the end of the liner is facing directly upwards. When the hole reaches a • Assemble each part correctly. Wrong assembly point directly below the stopper, you will hear a might cause an accident. - Page 10 • Do not install or remove the blade while the ATTACHING THE HANDLE engine is in operation. • Use HUSQVARNA’s genuine replacement blades NOTE and metal fixtures when installing the blade. • When installing or removing the blade, fix the The loop handle should be located between the arrow machine securely, and wear robust gloves.
- Page 11 When using the nylon cutter, carefully note the following. • Use HUSQVARNA’s genuine nylon cutter. When using a commercially-available nylon cutter, make sure that 2. Attach the cover (SE11,(11)) and fix it with screw.
-
Page 12: Fuel
Mixing ratios: When using Husqvarna genuine 2-cycle oil (FC grade): 50:1 (100 ml of oil for every 5 liters of gasoline) When using commercially available 2-cycle oil (FB... -
Page 13: Operation
7. Operation ■ REFUELING WARNING WARNING • Keep the throttle lever set always to the idling position when starting or stopping the engine, or • Refuel the fuel tank in a flat place outdoors. Avoid moving the machine. If the throttle lever is set to smoking or bringing any flame or spark near the any position other than the idling position, the fuel, and stub out any cigarette. - Page 14 7. Operation position and pull out the starter rope repeatedly, or try IMPORTANT the starting operation again after removing the spark plug and drying the electrode. Do not pull out the starter rope up to its end, and do not let the knob jump out of the right hand otherwise it may 1.
- Page 15 7. Operation (1) Area of the blade where the machine is prone to blade thrust WARNING ■ CUTTING OPERATION • When using this machine, read and obey the precautions and instructions described in “Safety WARNING precautions” (pages 5 to 8) of this manual. •...
- Page 16 7. Operation 4. Use a slow, deliberate action to cut heavy growth. The rate of cutting motion will depend on the material being cut. Heavy growth will require slower action than will light growth. 5. Never swing the unit so hard as you are in danger of losing your balance or control of the unit.
-
Page 17: Maintenance
8. Maintenance ■ BLADE of the spool. • Sharpen each cutting edge and make sure the 4. Wind up the line in the correct direction as indicated bottom corner is rounded. (MA1) on the spool. • Do not cool the blade with water in case of using 5. - Page 18 8. Maintenance ■ FUEL FILTER WARNING When you mount or dismount the fuel filter, be careful not to damage the rubber packing. A damaged rubber packing or insufficient mounting of the fuel filter will cause fuel to leak. Check how heavily the fuel filter is clogged from the fueling port of the fuel tank every 25 hours of use.
- Page 19 8. Maintenance on the side where the main pipe is installed, and 2. Further tighten all screws, bolts and fittings. 3. Make sure that no oil or grease remains between the mount the plug in its original position. 4. Wipe off the pushed-out grease, and mount the blade clutch lining and the drum.
- Page 20 8. Maintenance The engine revolution speed increases when you turn 5. Apply a little oil to the blade, put the cover on the the idling adjustment screw clockwise, and decreases blade, and keep the machine in a safe place away when you turn it counterclockwise.
-
Page 21: Trouble Shooting
• When the symptoms in the left column do not improve after taking the measures in the right column, please contact the shop where you bought this product. • For the measures marked with , please buy HUSQVARNA’s genuine parts at the shop where you bought this product. WARNING •... - Page 24 Original instructions 1153989-26 2010-11-01...