Table of Contents
Advertisement
Optical Adjustments
INTEGRATOR LENS ADJUSTMENT
[Before Adjustment]
- Adjustment requires a 2.0mm hex driver and a slot screwdriver.
- Remove the cabinet top following to "Cabinet Disassemblies".
- Disconnect AV sub board and connectors FPC cable of LCD panels on the main unit.
[Adjustment]
1. Turn on lamp by a state of without FPC cable of LCD
panels.
2. Insert a light block sheet in front of the Blue panel to
block the blue light so that red and green light are pro-
jected.
3. Adjust the adjustment base of integrator lens-IN and
integrator lens-OUT to make color uniformity in yel-
low.
1) If the un-uniform color appears on the top or bot-
tom of the screen as shown in Fig.5
Fig.5-
a
Fig.5-
A
b
, loosen 2
-a
Yellow
Slot B
A
screws "A" (Fig.5
slot screwdriver into slot "B" and turn it to make
color uniformity in yellow.
2) If the un-uniform color appears on the left or right
of the screen as shown in Fig.5
"C" (Fig.5
) with the hex driver and insert a slot
-d
screwdriver into slot "D" and turn it to make color
uniformity in yellow.
6. Tighten the 2 screws "A" or "C" to fix the integrator
lens-IN and OUT unit.
Fig.5-
c
Fig.5-
d
-23-
) with hex driver and insert a
-b
, loosen 2 screws
-c
Yellow
C
Slot D
Integrator Lens-OUT
Integrator Lens-IN
Fig.5
C
- Quick Links:
- Specifications
- Lamp Replacement
Hide quick links:
Advertisement
Table of Contents
