Advertisement
Quick Links
24v driven, FTP-607 Series
2" HiGH SPeed THerMaL PrinTer
FTP-627MCL053/054
n Overview
The FTP-627 MCL Series are 24V driven high-speed printers
with a 2-inch paper width equivalent.
The FTP-627 MCL Series can be used for a variety of
applications, such as CAT/EFT, POS, banking terminals, and
measurement and medical equipment.
n HiGHLiGHTS
• Ultra compact
Height 5.5 mm, width 83.5 mm, depth 35.7 mm
• High speed printing
It can print at 00 mm/s (800 dotlines/s) maximum by using
Fujitsu's unique head drive control.
• Two types of paper routes
Front or bottom feed.
• easy paper setting
Our unique platen release mechanism allows a
wide paper route even if the printer is ultra-compact, so
paper can be easily inserted. Conventional auto loading is
also available.
FTP-627MCL053/054
FTP-627DSL238
Advertisement
Related Manuals for Fujitsu FTP-627MCL054
Summary of Contents for Fujitsu FTP-627MCL054
- Page 1 Height 5.5 mm, width 83.5 mm, depth 35.7 mm FTP-627MCL053/054 • High speed printing It can print at 00 mm/s (800 dotlines/s) maximum by using Fujitsu's unique head drive control. • Two types of paper routes Front or bottom feed. • easy paper setting Our unique platen release mechanism allows a wide paper route even if the printer is ultra-compact, so paper can be easily inserted.
-
Page 2: Part Numbers
FTP-627MCL053/054 n ParT nUMberS l e l l a i l e l l a i n SPeCiFiCaTiOnS Item Specifications Part number FTP-627MCL053/054 Printing method Thermal-line dot method Dot structure 384 dots/line Dot pitch (Horizontal) 0.25 mm (8 dots/mm)—Dot density Dot pitch (Vertical) 0.25 mm (8 dots/mm)—Line feed pitch Effective printing area 48 mm... - Page 3 FTP-627MCL053/054 n SPeCiFiCaTiOnS c i f ± ± o i l n i l ˚ 0 ˚ 0 y t i ˚ 0 ˚ 0 y t i t s i d i l c t i v i t , ) r , ) r v i t , ) r...
- Page 4 1. Printer mechanism FTP-627MCL053 FTP-627MCL054 Unit: mm Note: 1. Dimensions are nominal value (tolerance ±5 unless otherwise specified). 2. Platen unit (lever, platen, etc) moves by approximately 0.7mm toward paper insertion direction when platen is open.
- Page 5 FTP-627MCL053/054 2. interface board 41.0 CN 3 CN 8 CN 5 CN 1 CN 7 CN 6 CN 2 17. 5 35. 5 51.0 3. 3 63. 5 3. 3 70.0 Unit: mm...
- Page 6 FTP-627MCL053/054 1. Connector (FPC) specification (CN3) () Connector Mechanical unit side: FPC connector Remote side (housing site): 5260-3090 (made by Molex) (2) Pin assignment on the mechanical side — — — c t i c t i — — — —...
- Page 7 ©2006 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property off their respective owners. Fujitsu Components America does not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. reserves the right to change specifications/datasheets without prior notice. Rev. 01/26/2006.