hit counter script
Cisco CATALYST 6500 WS-X6066-SLB-S-K9 Installation Note
  1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Switch
  5. CATALYST 6500 WS-X6066-SLB-S-K9
  6. Installation note
Cisco CATALYST 6500 WS-X6066-SLB-S-K9 Installation Note

Cisco CATALYST 6500 WS-X6066-SLB-S-K9 Installation Note

Catalyst 6500 series switch content switching module with ssl
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Catalyst 6500 Series Switch Content Switching
Module with SSL Installation Note
Product Number: WS-X6066-SLB-S-K9
This publication describes how to install the Content Switching Module with SSL (CSM-S) in the
Catalyst 6500 series switches and includes the software and hardware requirements.
The term SSL daughter card refers to a Secure Socket Layer (SSL) termination daughter card that
Note
accelerates SSL transactions. Except where specifically differentiated, the term Content Switching
Module and its acronym CSM include both the Content Switching Module and the Content Switching
Module with SSL. The term Content Switching Module with SSL and its acronym CSM-S are used only
where the information presented is specific to the CSM-S.
Contents
This publication contains these sections:
•
•
•
•
•
•
•
•
•
•
•
Corporate Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Copyright © 2005 Cisco Systems, Inc. All rights reserved.
Using the CLI, page 20

Advertisement

Table of Contents
loading

Related Manuals for Cisco CATALYST 6500 WS-X6066-SLB-S-K9

Summary of Contents for Cisco CATALYST 6500 WS-X6066-SLB-S-K9

  • Page 1: Table Of Contents

    Obtaining Documentation, page 24 • Documentation Feedback, page 25 • Cisco Product Security Overview, page 25 • Corporate Headquarters: Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA Copyright © 2005 Cisco Systems, Inc. All rights reserved.

  • Page 2: Safety Overview

    Safety Overview Obtaining Technical Assistance, page 26 • Obtaining Additional Publications and Information, page 27 • Safety Overview IMPORTANT SAFETY INSTRUCTIONS Warning This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents.
  • Page 3 Safety Overview Warnung WICHTIGE SICHERHEITSHINWEISE Dieses Warnsymbol bedeutet Gefahr. Sie befinden sich in einer Situation, die zu Verletzungen führen kann. Machen Sie sich vor der Arbeit mit Geräten mit den Gefahren elektrischer Schaltungen und den üblichen Verfahren zur Vorbeugung vor Unfällen vertraut. Suchen Sie mit der am Ende jeder Warnung angegebenen Anweisungsnummer nach der jeweiligen Übersetzung in den übersetzten Sicherheitshinweisen, die zusammen mit diesem Gerät ausgeliefert wurden.
  • Page 4 Safety Overview Varning! VIKTIGA SÄKERHETSANVISNINGAR Denna varningssignal signalerar fara. Du befinner dig i en situation som kan leda till personskada. Innan du utför arbete på någon utrustning måste du vara medveten om farorna med elkretsar och känna till vanliga förfaranden för att förebygga olyckor. Använd det nummer som finns i slutet av varje varning för att hitta dess översättning i de översatta säkerhetsvarningar som medföljer denna anordning.
  • Page 5 Safety Overview Aviso INSTRUÇÕES IMPORTANTES DE SEGURANÇA Este símbolo de aviso significa perigo. Você se encontra em uma situação em que há risco de lesões corporais. Antes de trabalhar com qualquer equipamento, esteja ciente dos riscos que envolvem os circuitos elétricos e familiarize-se com as práticas padrão de prevenção de acidentes. Use o número da declaração fornecido ao final de cada aviso para localizar sua tradução nos avisos de segurança traduzidos que acompanham o dispositivo.
  • Page 6 Safety Overview Catalyst 6500 Series Switch Content Switching Module with SSL Installation Note 78-16856-01...

  • Page 7: Front Panel Description

    Front Panel Description Front Panel Description These sections describe the physical attributes of the CSM-S: • LEDs, page 8 • RJ-45 Connector, page 9 SSL Connector, page 9 • Figure 1 shows the CSM-S front panel. Figure 1 Content Switching Module with SSL Front Panel SSL Certificate Management Status Connector...
  • Page 8 Front Panel Description You are required to make initial SSL daughter card configurations through a direct connection to the Note CSM-S Certificate Management port (Cert. Mgt). After the initial configurations, you can make an SSH or Telnet connection to further configure the module. See Chapter 5 in the Catalyst 6500 Series Content Switching Module with SSL Installation and Configuration Note.

  • Page 9: Environmental And System Requirements

    Environmental and System Requirements RJ-45 Connector The RJ-45 connector, which is covered by a removable plate, is used to connect a management station device or a test device. This connector is used by field engineers to perform testing and to obtain dump information.

  • Page 10: Table 3

    CSM-S. Table 3 Supported Hardware and Software Product Number Minimum Cisco Recommended Recommended IOS Release Cisco IOS Release Catalyst OS Releases Content Switching Module Supervisor Engine 2 with MSFC2 12.2(18)SXD 12.2(18)SXD Not applicable Console Cable...

  • Page 11: Installing The Csm-S

    Cisco IOS Software 2.1(1) 12.2(18)SXD or higher for the features new to CSM-S release 2.1(1). Table 6 Catalyst Operating System on the Supervisor Engine and Cisco IOS Software on the MSFC CSM-S Software Catalyst Operating System Software 2.1(1) The CSM-S is currently not supported by the Catalyst operating system.

  • Page 12: Required Tools

    Installing the CSM-S Preparing to Install the CSM-S Before installing the CSM-S, make sure that the following items are available: Catalyst 6500 series switch chassis • Management station that is available through a Telnet or a console connection to perform •...

  • Page 13: Removing The Module

    Installing the CSM-S Slot 1 is reserved for the supervisor engine. • Slot 2 can be used for a redundant supervisor engine if the supervisor engine in slot 1 fails. • If a redundant supervisor engine is not required, slots 2 through 6 on the 6-slot chassis, slots 2 •...

  • Page 14: Installing A Module

    Installing the CSM-S If the slot from which you removed the module is to remain empty, install a module filler plate to keep Step 6 dust out of the chassis and to maintain proper airflow through the chassis. Blank faceplates (filler panels) serve three important functions: they prevent exposure to hazardous Warning voltages and currents inside the chassis;...
  • Page 15 Installing the CSM-S Figure 2 Positioning the Module in a Horizontal Slot Chassis Insert module between slot guides EMI gasket WS-X6K-SUP2-2 GE Switch Load 100% CONSOLE PORT PORT 1 MODE PORT 2 CONSOLE SUPERVISOR2 PCMCIA EJECT WS-X6K-SUP2-2 GE Switch Load 100% CONSOLE PORT...
  • Page 16 Installing the CSM-S Figure 3 Clearing the EMI Gasket in a Horizontal Slot Chassis WS-X6K-SU P2-2GE Switch Load 100% CONSOLE PORT 1 PORT PORT 2 MODE CONSOLE SUPERVIS OR2 PCMCIA EJECT WS-X6K-SU P2-2GE Switch Load 100% CONSOLE PORT 1 PORT PORT 2 MODE CONSOLE...
  • Page 17 Installing the CSM-S Figure 4 Ejector Lever Closure in a Horizontal Slot Chassis WS-X6K-SU P2-2GE Switch Load 100% CONSOLE PORT 1 PORT PORT 2 MODE CONSOLE SUPERVIS OR2 PCMCIA EJECT WS-X6K-SU P2-2GE Switch Load 100% CONSOLE PORT PORT 1 PORT 2 MODE CONSOLE SUPERVIS OR2...
  • Page 18 Installing the CSM-S Figure 5 Positioning the Module in a Vertical Slot Chassis Ejector lever fully extended STATUS gasket gasket INPUT OUTPUT FAIL INPUT OUTPUT FAIL Insert module between slot guides Carefully slide the module into the slot until the EMI gasket along the right edge of the module makes contact with the module in the slot adjacent to it and both ejector levers have closed to approximately 45 degrees with respect to the module faceplate.
  • Page 19 Installing the CSM-S Figure 6 Clearing the EMI Gasket in a Vertical Slot Chassis Gap between the module EMI gasket and the module above it 1 mm STATUS Press left Press left INPUT OUTPUT FAIL INPUT OUTPUT FAIL Exerting too much pressure on the ejector levers will bend and damage them. Caution While pressing on the ejector levers, simultaneously close them to fully seat the module in the backplane connector.

  • Page 20: Verifying The Installation

    Using the CLI The software interface for the module is the Cisco IOS and the Catalyst operating system command-line interface that is accessed through a Telnet connection to the switch or through the switch console interface.

  • Page 21: Related Documentation

    Related Documentation To understand the Cisco IOS command-line interface and Cisco IOS command modes, refer to Chapter 2, “Command-Line Interfaces,” in the Catalyst 6500 Series Switch Cisco IOS Software Configuration Guide. To understand the Catalyst operating system command-line interface and Catalyst operating system command modes, refer to Chapter 2, “Command-Line Interfaces,”...
  • Page 22 Translated Safety Warnings Warnung Unsichtbare Laserstrahlung. Radiazione laser invisibile. Avvertenza Advarsel Usynlig laserstråling. Aviso Radiação laser invisível presente. ¡Advertencia! Existe radiación láser invisible. Varning! Nu pågående osynlig laserstrålning. Warning Blank faceplates and cover panels serve three important functions: they prevent exposure to hazardous voltages and currents inside the chassis;...
  • Page 23 Translated Safety Warnings Warnung Blanke Faceplates und Abdeckungen haben drei wichtigen Funktionen: (1) Sie schützen vor gefährlichen Spannungen und Strom innerhalb des Chassis; (2) sie halten elektromagnetische Interferenzen (EMI) zurück, die andere Geräte stören könnten; (3) sie lenken den kühlenden Luftstrom durch das Chassis.

  • Page 24: Obtaining Documentation

    Obtaining Documentation Obtaining Documentation Cisco documentation and additional literature are available on Cisco.com. Cisco also provides several ways to obtain technical assistance and other technical resources. These sections explain how to obtain technical information from Cisco Systems. Cisco.com You can access the most current Cisco documentation at this URL: http://www.cisco.com/univercd/home/home.htm...

  • Page 25: Documentation Feedback

    Register to receive security information from Cisco. • A current list of security advisories and notices for Cisco products is available at this URL: http://www.cisco.com/go/psirt If you prefer to see advisories and notices as they are updated in real time, you can access a Product Security Incident Response Team Really Simple Syndication (PSIRT RSS) feed from this URL: http://www.cisco.com/en/US/products/products_psirt_rss_feed.html...

  • Page 26: Obtaining Technical Assistance

    Use the Cisco Product Identification (CPI) tool to locate your product serial number before submitting a web or phone request for service. You can access the CPI tool from the Cisco Technical Support Website by clicking the Tools & Resources link under Documentation & Tools. Choose Cisco Product Identification Tool from the Alphabetical Index drop-down list, or click the Cisco Product Identification Tool link under Alerts &...

  • Page 27: Submitting A Service Request

    Cisco TAC engineer. The TAC Service Request Tool is located at this URL: http://www.cisco.com/techsupport/servicerequest For S1 or S2 service requests or if you do not have Internet access, contact the Cisco TAC by telephone. (S1 or S2 service requests are those in which your production network is down or severely degraded.) Cisco TAC engineers are assigned immediately to S1 and S2 service requests to help keep your business operations running smoothly.
  • Page 28 Obtaining Additional Publications and Information Cisco Press publishes a wide range of general networking, training and certification titles. Both new • and experienced users will benefit from these publications. For current Cisco Press titles and other information, go to Cisco Press at this URL: http://www.ciscopress.com...

Table of Contents